zinjo
|
|
December 25, 2014, 01:24:26 AM |
|
It seems to be slow and unresponsive again at this time. DDOS attack back?
If so you would think people would have enough dignity and respect not to screw with peoples communication with their families on Christmas eve. /rant
Yup, seems to be getting low ddos attacks -_- but its almost like this 24\7 :/ OP: If you're running this on vps, why you don't buy ddos protection? I'm sure you don't get higher ddos attacks than 10-15 gbps :c
|
|
|
|
ruggedinbox.com (OP)
Member
Offline
Activity: 82
Merit: 10
|
|
December 26, 2014, 06:15:26 PM |
|
Hi yes we had to disable squirrelmail again and currently there are a lot of junk requests to roundcube, draining most of the Tor Hidden Service traffic. Since the attack is targeting RIB's Hidden Services, all we can see is traffic coming from 127.0.0.1 (that's how Tor HS works) hence is impossible to discriminate and filter the offensive clients. Also, the datacenter DDOS filter is useless in this scenario: we already have DDOS protection but it doesn't protect Tor Hidden Services, it protects only from usual clearnet attacks. For reference, we got some confirms here: https://lists.torproject.org/pipermail/tor-talk/2014-August/034341.htmlWe have now disabled our Tor Hidden Services and restored squirrelmail, thus we are currently accepting traffic only from and to clearnet. You can reach the clearnet service here: https://ruggedinbox.com
|
|
|
|
ruggedinbox.com (OP)
Member
Offline
Activity: 82
Merit: 10
|
|
December 28, 2014, 08:47:46 PM |
|
Hi little update, all services are up.
Let us know if you have any problem! RuggedInbox team
|
|
|
|
badbiosvictim
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 28, 2014, 11:06:56 PM |
|
I read about ruggedinbox in \r\privacy subreddit of reddit.com. Thank you for providing such a private email client.
I have an android 2.3.4 phone and android 4.4.2 tablet. Opera Classic browser and Firefox 34.0.1 browser can render ruggedinbox.com website. However, orweb browser and lighting browser cannot. Lighting browser error message: "Website not available." Orweb's error message: "Website not available." Are other users getting these error messages?
|
|
|
|
zinjo
|
|
December 29, 2014, 10:25:21 AM |
|
Hi little update, all services are up.
Let us know if you have any problem! RuggedInbox team
Tnx finally i can use it
|
|
|
|
badbiosvictim
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 01, 2015, 10:23:26 PM |
|
The emails I am sending from my ruggedinbox.com account were rejected by a company because they didn't come from my registered email account. The emails I sent came from vmail@ruggedinbox.com. Is my account hacked? Do I need to close it?
|
|
|
|
Somedday
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 02, 2015, 11:30:40 AM |
|
I am so happy to have run across Ruggedinbox! This is just what my family was looking for. So tired of data mining. So, thanks to the team who has created this!!!! So, I was wondering if there was a "Claws For Dummies" book or something. I am trying to configure Claws and just do not understand what goes where in the configuration settings. My family has always used Yahoo and Gmail, using the web interface. But now, in order to be private, we would like to use Claws to pull the email from the server to our personal drives using POP3. Even though our email server is offshore, if nothing is ever stored there, the better. Is there a place that describes how to configure Claws? Thanks again for the great system.
|
|
|
|
ruggedinbox.com (OP)
Member
Offline
Activity: 82
Merit: 10
|
|
January 02, 2015, 08:11:13 PM |
|
The emails I am sending from my ruggedinbox.com account were rejected by a company because they didn't come from my registered email account. The emails I sent came from vmail@ruggedinbox.com. Is my account hacked? Do I need to close it? Hi, your account was not hacked and we are aware of this problem. The emails sent from RIB have an additional header, that 'vmail' sender, which is added by the script that limits daily emails. Some systems, like ebay, have problems with this. The fix isn't straightforward but we'll dig into this again and let users know if positive. Thanks for your interest!
|
|
|
|
ruggedinbox.com (OP)
Member
Offline
Activity: 82
Merit: 10
|
|
January 02, 2015, 08:16:48 PM |
|
I am so happy to have run across Ruggedinbox! This is just what my family was looking for. So tired of data mining. So, thanks to the team who has created this!!!! So, I was wondering if there was a "Claws For Dummies" book or something. I am trying to configure Claws and just do not understand what goes where in the configuration settings. My family has always used Yahoo and Gmail, using the web interface. But now, in order to be private, we would like to use Claws to pull the email from the server to our personal drives using POP3. Even though our email server is offshore, if nothing is ever stored there, the better. Is there a place that describes how to configure Claws? Thanks again for the great system. Hi and welcome! Currently we don't have any step-by-step howto, anyway be sure to use the following parameters: Host: ruggedinbox.com IMAP (TLS) port: 993 POP (TLS) port: 995 SMTP (TLS) port: 465 and be sure to always use the complete address of your account: username@ruggedinbox.comalso, in SSL, check 'Use SSL for POP3 connection' and check 'Use non blocking SSL'. Thanks for your interest and wish you a great 2015! RuggedInbox team
|
|
|
|
badbiosvictim
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 03, 2015, 04:28:37 PM |
|
Thanks for explaining vmail. Ebay was the only company to reject my emails, so I wont use with Ebay.
Thanks offering squirrelmail to give option to disable javascript to make us safer. Squirrelmail website works very well using opera or firefox for android. Roundcube does not. I cannot open emails.
I have several android devices. Everytime I set up my email account, K-9 reports : "Unrecognized Certificate. The server presented an invalid certificate." Should K-9accept the key anyway?
|
|
|
|
ruggedinbox.com (OP)
Member
Offline
Activity: 82
Merit: 10
|
|
January 03, 2015, 06:15:04 PM |
|
I have several android devices. Everytime I set up my email account, K-9 reports : "Unrecognized Certificate. The server presented an invalid certificate." Should K-9accept the key anyway?
Hi! Our smtp, pop and imap services are still using the self-signed certificate. Only the web server (https) is using the valid SSL certificate. Some time ago we discussed internally about this and decided that since we don't trust CAs and since no user is complaining, we'll continue to use the self-signed certificate. That said, ideally the mail client (K-9) should be able to import the certificate in order to stop prompting that question.
|
|
|
|
badbiosvictim
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 03, 2015, 06:34:30 PM |
|
Thanks for the SSL explanation. After accepting the SSL key, K-9 does not prompt any more. I recommend including explanation on websites so users will not worry about K-9 warning. thanks.
|
|
|
|
Somedday
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 04, 2015, 09:33:54 AM |
|
I have failed. I'm not worthy. Trying desperately to make claws work but, have had no success. May I try this?... Look at the settings below, and see what is wrong them: BasicPersonal information Server information- Protocol: Pop3
Server for receiving: ruggedinbox.com SMTP server (send): ruggedinbox.com User ID: myusername Password: myPassword SSL- POP3
Use SSL for POP3 connection: selected Send Use STARTTLS command to start SSL session: selected Client certificates Use non-blocking SSL: de-selected
AdvantageSign key- Use default GnuPC key: selected
If you see what I have done wrong, let me know and I will make the adjustments. I sure do appreciate the help.
|
|
|
|
ruggedinbox.com (OP)
Member
Offline
Activity: 82
Merit: 10
|
|
January 04, 2015, 07:04:44 PM |
|
I have failed. I'm not worthy. Trying desperately to make claws work but, have had no success. May I try this?... Look at the settings below, and see what is wrong them: BasicPersonal information Server information- Protocol: Pop3
Server for receiving: ruggedinbox.com SMTP server (send): ruggedinbox.com User ID: myusername Password: myPassword SSL- POP3
Use SSL for POP3 connection: selected Send Use STARTTLS command to start SSL session: selected Client certificates Use non-blocking SSL: de-selected
AdvantageSign key- Use default GnuPC key: selected
If you see what I have done wrong, let me know and I will make the adjustments. I sure do appreciate the help. Hi, here: SMTP server (send): ruggedinbox.com User ID: myusername Password: myPassword[/li][/list] are you using the full format of your account: myusername@ruggedinbox.com?
|
|
|
|
Somedday
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 04, 2015, 07:24:23 PM Last edit: January 06, 2015, 02:14:09 PM by Somedday |
|
I changed my settings to: Server information Protocol: Pop3 Server for receiving: ruggedinbox.com SMTP server (send): ruggedinbox.com User ID: myusername@ruggedinbox.com Password: myPassword Thius is my error: * Account 'xxxxxx': Connecting to POP3 server: ruggedinbox.com... *** SSL handshake failed *** Connection failed. Am I supposed to have the setting set at: Protocol: Pop3 Server for receiving: ruggedinbox.com:995 SMTP server (send): ruggedinbox.com:465 User ID: myusername@ruggedinbox.com Password: myPassword Thanks for the help!!!!
|
|
|
|
ruggedinbox.com (OP)
Member
Offline
Activity: 82
Merit: 10
|
|
January 06, 2015, 03:28:46 AM |
|
I changed my settings to: Server information Protocol: Pop3 Server for receiving: ruggedinbox.com SMTP server (send): ruggedinbox.com User ID: myusername@ruggedinbox.com Password: myPassword Thius is my error: * Account 'GohnGonner': Connecting to POP3 server: ruggedinbox.com... *** SSL handshake failed *** Connection failed. Am I supposed to have the setting set at: Protocol: Pop3 Server for receiving: ruggedinbox.com:995 SMTP server (send): ruggedinbox.com:465 User ID: myusername@ruggedinbox.com Password: myPassword Thanks for the help!!!! Hi, in your home directory you should have a file named .claws-mail/accountrc compare it with the following working example: [Account: X] account_name=xxx@ruggedinbox.com is_default=0 name=xxx@ruggedinbox.com address=xxx@ruggedinbox.com organization= protocol=0 receive_server=ruggedinbox.com smtp_server=ruggedinbox.com nntp_server= local_mbox=/var/mail use_mail_command=0 mail_command=/usr/sbin/sendmail -t -i use_nntp_auth=0 use_nntp_auth_onconnect=0 user_id=xxx@ruggedinbox.com password=XXXX use_apop_auth=0 remove_mail=1 message_leave_time=0 message_leave_hour=0 enable_size_limit=0 size_limit=1024 filter_on_receive=1 filterhook_on_receive=1 imap_auth_method=0 receive_at_get_all=1 max_news_articles=300 inbox=#mh/Mailz/inbox local_inbox=#mh/Mailz/inbox imap_directory= imap_subsonly=1 low_bandwidth=0 generate_msgid=1 generate_xmailer=0 add_custom_header=0 msgid_with_addr=0 use_smtp_auth=1 smtp_auth_method=0 smtp_user_id= smtp_password=! pop_before_smtp=0 pop_before_smtp_timeout=5 signature_type=0 signature_path=/home/xxx/.signature auto_signature=1 signature_separator=-- set_autocc=0 auto_cc= set_autobcc=0 auto_bcc= set_autoreplyto=0 auto_replyto= enable_default_dictionary=0 default_dictionary=en enable_default_alt_dictionary=0 default_alt_dictionary=en compose_with_format=0 compose_subject_format= compose_body_format= reply_with_format=0 reply_quotemark= reply_body_format= forward_with_format=0 forward_quotemark= forward_body_format= default_privacy_system= default_encrypt=0 default_encrypt_reply=1 default_sign=0 default_sign_reply=1 save_clear_text=0 encrypt_to_self=0 privacy_prefs=gpg=XXX== ssl_pop=1 ssl_imap=0 ssl_nntp=0 ssl_smtp=2 use_nonblocking_ssl=1 in_ssl_client_cert_file= in_ssl_client_cert_pass=! out_ssl_client_cert_file= out_ssl_client_cert_pass=! set_smtpport=0 smtp_port=25 set_popport=0 pop_port=995 set_imapport=0 imap_port=143 set_nntpport=0 nntp_port=119 set_domain=0 domain= set_tunnelcmd=0 tunnelcmd= mark_crosspost_read=0 crosspost_color=0 set_sent_folder=0 sent_folder= set_queue_folder=0 queue_folder= set_draft_folder=0 draft_folder= set_trash_folder=0 trash_folder= imap_use_trash=1 don't forget to close claws-mail while editing the file! Let us know how it goes .. send us a PM if you prefer.
|
|
|
|
Somedday
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 06, 2015, 02:13:23 PM Last edit: January 06, 2015, 07:07:33 PM by Somedday |
|
You have given me hope! I now have this message: * Account ' xxxxxxr@ruggedinbox.com': Connecting to POP3 server: ruggedinbox.com... *** SSL handshake failed *** Connection failed. I made sure the Use non-blocking SSL is unchecked. Tried again and had the same issue. I can login to this account via webmail, but not in claws. What should I check next? Thanks.
|
|
|
|
ruggedinbox.com (OP)
Member
Offline
Activity: 82
Merit: 10
|
|
January 09, 2015, 02:10:21 AM |
|
You have given me hope! I now have this message: * Account ' xxxxxxr@ruggedinbox.com': Connecting to POP3 server: ruggedinbox.com... *** SSL handshake failed *** Connection failed. I made sure the Use non-blocking SSL is unchecked. Tried again and had the same issue. I can login to this account via webmail, but not in claws. What should I check next? Thanks. Hi! Ok we'll provide a step-by-step guide on claws-mail configuration asap
|
|
|
|
Somedday
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 09, 2015, 05:20:43 AM |
|
|
|
|
|
ruggedinbox.com (OP)
Member
Offline
Activity: 82
Merit: 10
|
|
January 09, 2015, 06:20:53 AM |
|
You have given me hope! I now have this message: * Account ' xxxxxxr@ruggedinbox.com': Connecting to POP3 server: ruggedinbox.com... *** SSL handshake failed *** Connection failed. I made sure the Use non-blocking SSL is unchecked. Tried again and had the same issue. I can login to this account via webmail, but not in claws. What should I check next? Thanks. Hi, we found the source of the problem, it wasn't your fault! When hardening the imap/pop service (dovecot) against the recent POODLE vulnerability, we followed the advise to disable SSL2 and SSL3 but that is giving problems with some email clients. we'll fix this asap, sorry about that.
|
|
|
|
|