[ANN] [BBL] BitBlock-World's first X15 coin|Bittrex|Poloniex|Mandatory Update

[hardroad]

The price now in bittrex
0.00013000
BBL go to the moon 
hold dont rush to sell

[Clazert]

Other than this being the first x15 what else is going for it?

That I'll can dump some of them, of course! that is the only difference for me, so cool earning 500$ in 2 hours of cpu mining 

[Vann]

And it seems there is no answer about the Darkcoin logo into the BBL wallet tray icon ?

Read between the lines, this is DRK 2.0! just w8!  

Exactly, it's DRK 2.0 in at least 1 aspect:

With an even faster instamine 1.8m in 18 hours.
The next 1,8m coins at current block reward (25) will take 125 days.

Interpretation of these facts is up to every individual of course : )

That's not true. It took less than 8 hours for over 1.6M coins to be mined with Darkcoin, which uses the same block reward structure and started at 500 coins per block as well. All without even a Windows wallet available for days.

http://www.devtome.com/doku.php?id=a_massive_investigation_of_instamines_and_fastmines_for_the_top_alt_coins#darkcoin


In comparison the BBL was MUCH more fair an evenly distributed. The wallets, miners, pools and block explorer were all available at launch.

[blaFrog]

That I'll can dump some of them, of course! that is the only difference for me, so cool earning 500$ in 2 hours of cpu mining 

I won't sell any right now, the price is still too low.

[pivce]

buy now and thank me later 

[hedgy73]

I have downloaded the cpu miner and tried running it on both 32 and 64 bit windows 7 pc's on suprnova pool using .bat file command line 'minerd -a bitblock -o stratum+tcp://bbl.suprnova.cc:3663 -u x -p x -t 3' as shown on pool getting started guide and every time the miner wont start. I've tried different thread settings and no thread setting and still the same.

Can anyone please tell me correct .bat command line.

[reflector]

buy now and thank me later 

Yeah, this is looking pretty explosive.

[tacee]

WTF,when I got up this morning,bbl.suprnova.cc down again

[Vann]

I have downloaded the cpu miner and tried running it on both 32 and 64 bit windows 7 pc's on suprnova pool using .bat file command line 'minerd -a bitblock -o stratum+tcp://bbl.suprnova.cc:3663 -u x -p x -t 3' as shown on pool getting started guide and every time the miner wont start. I've tried different thread settings and no thread setting and still the same.

Can anyone please tell me correct .bat command line.

Try start it with this in the bat to see if it runs and gives you a hashrate:

Code:

minerd -a bitblock --benchmark
Pause

If it  still won't run, make sure the miner id not being block by your firewall. Also check the file properties to see if Windows is blocking the file. I know Windows 8.1 will keep some wallets and miners from running until you unblock them.

[hedgy73]

I have downloaded the cpu miner and tried running it on both 32 and 64 bit windows 7 pc's on suprnova pool using .bat file command line 'minerd -a bitblock -o stratum+tcp://bbl.suprnova.cc:3663 -u x -p x -t 3' as shown on pool getting started guide and every time the miner wont start. I've tried different thread settings and no thread setting and still the same.

Can anyone please tell me correct .bat command line.

Try start it with this in the bat to see if it runs and gives you a hashrate:

Code:

minerd -a bitblock --benchmark
Pause

If it  still won't run, make sure the miner id not being block by your firewall. Also check the file properties to see if Windows is blocking the file. I know Windows 8.1 will keep some wallets and miners from running until you unblock them.

Thank you very much that's done it

[shai_]

and.. block explorer is down
not that it ever worked correctly... addresses display was wrong

[hedgy73]

Can you use the gpu miner on suprnova pool?

[baraba80]

Can you use the gpu miner on suprnova pool?

yes

[hedgy73]

Can you use the gpu miner on suprnova pool?

yes

Thanks . Can you please post your .bat command line I can't get it working.

Sorry just worked it out

[reflector]

and.. block explorer is down
not that it ever worked correctly... addresses display was wrong

Perfect opportunity for you to create a working one!

[Vann]

Can you use the gpu miner on suprnova pool?

yes

Thanks . Can you please post your .bat command line I can't get it working.

Sorry just worked it out

I use this bat and config file in the same directory as the GPU miner. Get ~1.2 MH/s with a HD7850 and v14.4 AMD drivers.

Miner bat:

Code:

@ECHO off
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
CLS
COLOR 20
DEL *.bin
sgminer.exe --config ./bitblock_pool.conf
pause

bitblock_pool.conf config file:

Code:

{
"pools" : [
	    {
                    "name" : "pool-1",
		    "url" : "stratum+tcp://pool1:3333",
		    "user" : "username.worker",
		    "pass" : "password"
	    },
	    {
                    "name" : "failover-pool",
		    "url" : "stratum+tcp://pool2:3333",
		    "user" : "username.worker",
		    "pass" : "password"
	    }
],

"intensity" : "17",
"algorithm" : "bitblock",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8196",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1200",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-fan" : "100",
"auto-fan" : true,
"temp-cutoff" : "88",
"temp-overheat" : "85",
"temp-target" : "75",
"temp-hysteresis" : "3",
"api-allow" : "W:127.0.0.1,W:192.168.0.1/14",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"tcp-keepalive" : "30",
"gpu-dyninterval": "7",
"gpu-platform" : "0",
"hotplug" : "0",
"log" : "5",
"failover-only" : true,
"failover-switch-delay" : "1",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "0",
"expiry" : "1",
"scan-time" : "1",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[expalpo]

GPU miner works well on P2Pool if you use the no-extranonce setting...

Code:

"pools" : [
	{
	    "name" : "rig-01",
		"url" : "stratum+tcp://<host>:<port>",
		"user" : "<bbl address>",
		"pass" : "<whatever>",
		"pool-priority" : "0",
		"no-extranonce" : true
	}
],
...

[djm34]

ok, I have released the source of the x15 ccminer.

It can be found here: https://github.com/djm34/ccminer
compilation on windows takes forever (sorry for that)
It should compile on linux (I fixed the Makefile.am), if anything is missing let me know... (I can't test it)

To run x15 "ccminer -a x15"
as previously said, it is far from perfect (gpu usage rather low around 80%, so there are room for optimisation... and exceptionally the 780ti runs at 74°C).
I get at the moment (started on the previous compilation):

1467MHash/s for the 750ti (gpu usage around 99% strangely)
2900MHash/s for the 780ti (on supernova...)

[kikeda]

wokeup and bbl is @ .00012  

[damiano]

280x I get 2800-2900.  Is that good?

Tweaking things around trying to break 3000.  I've got into the high 2900's