[WTS] Radeon HD Dead Fan Repair Kit : 4xxx - 5xxx Series Reference GPU

[cablepair]

Complete Dead Fan Repair Kit Includes:
Replacement Fan
Thermal Paste
Thermal Pad (self cut to size to replace any worn out VRAM thermal pads)


Perfect Replacement Fan for most Reference 4xxx - 5xxx Radeon HD GPUS
including all the most popular mining cards (5830, 5850, 5870 & 5970)

Fan Specs:
    Current: 0.94A
    Fan Dimension: 75mm(D)*25mm(H)
    Hole Distance: 37mm*37mm*37mm
    Cord Length: 60mm
    Power Connector: 4Pin
    Voltage: DC12V


ONLY 4 BTC Each - Includes FREE Shipping (usa only)
  just click below to order! (International Buyers please PM me first)

[1715059082]

1715059082

[1715059082]

1715059082

[1715059082]

1715059082

[dmcurser]

wshat kinda thermal pads are you send with this ?

[cablepair]

1.Dimension:

 

2.5cm x 2.5cm x 1.5mm

2.Specification:

Color: Light Blue


 

(2)Continuous Temp:-40-200 degree

(3)Thermal Conductivity:3.2w/m-K

(4)Breakdown Voltage:4kv

(5)Hardness(type 00):65

(6)Specific Gravity:2.2 (ASTM D 2240)

(7)Tensile Strength:3.2kg/cm3

(8)Elongation:220%

(9)RoHS &Halogens Free:all pass

[max in montreal]

take a pic of the other side of the fan please...need to see the back.

[rjk]

take a pic of the other side of the fan please...need to see the back.

They're all identical across several cards, right? Triangular shape, rounded corners.

[max in montreal]

ok picture this...the ace of spades...it is basically a triangle with a stem correct?

on some of these fans the stem is wider than the originals. the triangle fits in an area so its placed perfectly, but if the stem of your ace is wider than the slot it fits in, you have to file it down and tie wrap it to attach it properly... i did not have a problem with my 59's its the 58's that would not accept the wider stem...let me post a few pics in a couple of minutes...

[max in montreal]

stay tuned for shitty cell phone pics...

posts = posts + 1

[rjk]

ok picture this...the ace of spades...it is basically a triangle with a stem correct?

on some of these fans the stem is wider than the originals. the triangle fits in an area so its placed perfectly, but if the stem of your ace is wider than the slot it fits in, you have to file it down and tie wrap it to attach it properly... i did not have a problem with my 59's its the 58's that would not accept the wider stem...let me post a few pics in a couple of minutes...

You mean the heatshrink tubing over the fan wires? If it's too big, shrink it again or glue it down.

EDIT: Looks like these fans don't have heatshrink on their wires.

[max in montreal]

see the area the triangle fits in...then there is the extra space...



see the triangles, and the extra tab to hold the wire? these are different sizes... I just cut off that tab and held the wire down with the smallest tie wrap i could find.

[rjk]

see the triangles, and the extra tab to hold the wire? these are different sizes... I just cut off that tab and held the wire down with the smallest tie wrap i could find.

Oh, the tab. Can't say that I have ever seen it as large as in your second pic.

[max in montreal]

yes those were from ebay, still works fine though...

[cablepair]

bump

[mc_lovin]

this is a great deal.  do you have a good stock of these?

[cablepair]

this is a great deal.  do you have a good stock of these?

ive got 11 kits left right now ready to go

[WGD118]

Purchased two since one of mine fans died today. Made sure to pickup an extra one as I hate having cards sitting and doing nothing

[cablepair]

Shipped it out this morning

thanks for shopping with us!

[jarsumarsu]

I would like to buy four of these, how much is shipping costs to Finland?

[jarsumarsu]

Purchased four sets

[simplecoin]

3 purchased.

[cablepair]

simplecoin: your package is going out today, you should be receiving priority mail tracking number by email