FS: 4U Antminer S1 / S3 8 blades case

[w3e30us]

This pics below are of a prototype, it is made with thinner material, lacking some holes, and is put together with various fasteners to minimize cost of fabrication.

Final product will look similar, pending the number of units that will be produced.

Once I have at least 10 paid orders I will put this into production.

I will post the price shortly, working on few quotes.

Fabrication time approximately 10-14 days.

Please reply here, PM or email me with any questions. {alexdotshchipkovatgmaildotcom}

I can design and fabricate whatever configuration that's desired, non rack mount, 120 fans in back, 80 fans all over, 140 fans in front, box for blades only with no PSU, more than 8 blades etc. etc.
Minimum order for custom designs is 15 units.

It is possible to get 10 blades in 4U case but that will require modifying the heatsinks, which might be great for underclocked units.
18 blades in 7U case is possible without heatsink mod.

Here are some pics:
(if pics don't show properly they are here:)

http://e30.us/4sale/4u8s1

Having blades in this case dropped temps by 10 degrees C on overclocked S1s.

http://e30.us/4sale/4u8s1/IMG_3879.JPG

http://e30.us/4sale/4u8s1/IMG_3866.JPG

http://e30.us/4sale/4u8s1/IMG_3867.JPG

http://e30.us/4sale/4u8s1/IMG_3868.JPG

http://e30.us/4sale/4u8s1/IMG_3869.JPG

http://e30.us/4sale/4u8s1/IMG_3870.JPG

http://e30.us/4sale/4u8s1/IMG_3871.JPG

http://e30.us/4sale/4u8s1/IMG_3872.JPG

http://e30.us/4sale/4u8s1/IMG_3873.JPG

http://e30.us/4sale/4u8s1/IMG_3874.JPG

http://e30.us/4sale/4u8s1/IMG_3875.JPG

http://e30.us/4sale/4u8s1/IMG_3876.JPG

http://e30.us/4sale/4u8s1/IMG_3877.JPG

http://e30.us/4sale/4u8s1/IMG_3878.JPG

[1715404685]

1715404685

[1715404685]

1715404685

[1715404685]

1715404685

[raskul]

W/gh?
$/gh?

Looks very power hungry

[mstrongbow]

W/gh?
$/gh?

Looks very power hungry

He's selling the enclosure...not the miners. It looks to be a new way to setup you Antminer S1 blades.

Although a little late in the game this could prove useful for UNDERVOLTED/UNDERCLOCKED units as the difficulty increase has put MANY S1 miners offline due to kWh rates.

[w3e30us]

W/gh?
$/gh?

Looks very power hungry

He's selling the enclosure...not the miners. It looks to be a new way to setup you Antminer S1 blades.

Although a little late in the game this could prove useful for UNDERVOLTED/UNDERCLOCKED units as the difficulty increase has put MANY S1 miners offline due to kWh rates.

Correct!

Plus it cleans up mining setups and minimizes spaghetti effects

[lowbander80]

W/gh?
$/gh?

Looks very power hungry

He's selling the enclosure...not the miners. It looks to be a new way to setup you Antminer S1 blades.

Although a little late in the game this could prove useful for UNDERVOLTED/UNDERCLOCKED units as the difficulty increase has put MANY S1 miners offline due to kWh rates.

Undervolt is the only solution for now if there is a Bitmain kit for later on we discuss again

[CrazyGuy]

That is pretty awesome, good work!

[raskul]

W/gh?
$/gh?

Looks very power hungry

He's selling the enclosure...not the miners. It looks to be a new way to setup you Antminer S1 blades.

Although a little late in the game this could prove useful for UNDERVOLTED/UNDERCLOCKED units as the difficulty increase has put MANY S1 miners offline due to kWh rates.

Correct!

Plus it cleans up mining setups and minimizes spaghetti effects

ah gotcha, sorry my head was overtaken by hayfever yesterday, perhaps I didn't read properly.
looks like a very nice solution, be good to see similar for newer rigging; i'm sure you will get plenty of business for this. best luck

[kabopar]

Interesting.  If the price is right, this could be a good packaging solution.  Please post results of noise level and temperature readings.

Cheers

[dquancey]

Great little idea.

I had 10 antminers in my office at one point, was like spaghetti junction. This would of been brilliant.

Sadly, I've sold my ants since.

Wish you luck however.

[elaramus]

That is an amazingly well designed unit. I wish you'd have had those in January when I bought my first 10 S1's.

[lowbander80]

Great little idea.

I had 10 antminers in my office at one point, was like spaghetti junction. This would of been brilliant.

Sadly, I've sold my ants since.

Wish you luck however.

with S1 being the 20% of the network there is a lot of spaggetti out there...
please price

[lestak]

Would be keen. Can you give me a price?

[Trammel]

I might be interested in an enclosure for 2 S1's and 2 S3's.  I'm in UK.  What's the price.  If you post as a flat pack it would be easy to assemble.

[topminingcontracts]

I might be interested in an enclosure for 2 S1's and 2 S3's.  I'm in UK.  What's the price.  If you post as a flat pack it would be easy to assemble.

Good Job!

[sushi]

WOW!  Nice Looking!  where do you ship from? 

PM sent!!

This pics below are of a prototype, it is made with thinner material, lacking some holes, and is put together with various fasteners to minimize cost of fabrication.

Final product will look similar, pending the number of units that will be produced.

Once I have at least 10 paid orders I will put this into production.

I will post the price shortly, working on few quotes.

Fabrication time approximately 10-14 days.

Please reply here, PM or email me with any questions. {alexdotshchipkovatgmaildotcom}

I can design and fabricate whatever configuration that's desired, non rack mount, 120 fans in back, 80 fans all over, 140 fans in front, box for blades only with no PSU, more than 8 blades etc. etc.
Minimum order for custom designs is 15 units.

It is possible to get 10 blades in 4U case but that will require modifying the heatsinks, which might be great for underclocked units.
18 blades in 7U case is possible without heatsink mod.

Here are some pics:
(if pics don't show properly they are here:)

http://e30.us/4sale/4u8s1

Having blades in this case dropped temps by 10 degrees C on overclocked S1s.

[argovian]

was a price for this ever mentioned? definetly interested! Would help keep the wife happy haha

[w3e30us]

Interesting.  If the price is right, this could be a good packaging solution.  Please post results of noise level and temperature readings.

Cheers

Very first picture in OP, temps went down about 10 degrees C.

Noise is about 60 dB with 7500 rpm deltas, otherwise up to the fans that will be used.

[wjohnson1988]

Did you have to use a CNC for all of the custom cuts? Have you considered using a thinker sheet of aluminum for all of the panels? Definitely curious to see where this goes.

[nexus99]

I'd be interested in a very lightweight frame to stack 3 S3 vertically.

[w3e30us]

I'd be interested in a very lightweight frame to stack 3 S3 vertically.

How many  would you like to stack?