[ANN][WHRL] WhirlCoin | WhirlPool Algorithm | Sloped Rewards |AMD + CUDA Equal

[Altcoin4life]

What makes this coin different (and better) than any other alt out there?

Can I ask why everyone asks this like there isn't 95% pump and dump coins. All coins are the same until whales get behind one and push it, what makes them have value? Big communities that rally behind them to make them prime targets for pumping then dumping. Just get out somewhere near the top and you'll do fine. Don't get caught up in the hype/semantics.

[tarzanbigcity]

Volume seems rather low. How hard it is to mine this coin?

[go6ooo1212]

I thing it'll get harder and harder😊

[Swisscex]

Dear WhirlCoin community,

WhirlCoin (WHRL) is now tradable on swisscex.com: https://www.swisscex.com/market/WHRL_BTC

[uray]

i've done another optimization for AMD,
for R9 280x, hash rate now 9.4 Mhs
i will publish the miner soon after some testing

[djm34]

i've done another optimization for AMD,
for R9 280x, hash rate now 9.4 Mhs
i will publish the miner soon after some testing

you have one gpu running at 91°C

[eastwind_ja]

need a bigger exchange

[uray]

i've done another optimization for AMD,
for R9 280x, hash rate now 9.4 Mhs
i will publish the miner soon after some testing

you have one gpu running at 91°C

yeah bad asic... or thermal paste

[silverduck]

nice subreddit, http://www.reddit.com/r/whirlcoin/

[Gibcity]

r9 280 x
{
    "pools": [
        {
      "poolname" : "whirl",
      "url" : "stratum+tcp://whirl.suprnova.cc:7000",
      "user": "x",
      "pass": "x"
        },

        {
      "poolname" : "nist",
      "url" : "x",
      "user": "x",
      "pass": "x"
        }   
]
,
"kernel" : "whirlpool",
"api-listen" : true,
"api-port" : "4028",
"shaders" : "2560",
"expiry" : "120",
"log" : "5",
"queue" : "1",
"scan-time" : "30",
"gpu-threads" : "2",
"gpu-engine" : "950",
"gpu-fan" : "0-40",
"auto-fan" : true,
"gpu-memclock" : "1000",
"intensity" : "20",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "66",
"thread-concurrency" : "8192"
}




You can increase gpu engine and memclock

When I try putting this into my start.bat and run the .bat I get my CCC software log and errors on the sgminer saying this Should I be using something else to start this .bat? I can start mining with this sgminer -I 20 --no-submit-stale -k whirlcoin -o stratum+tcp://whirl.suprnova.cc:7000 -u xxx -p xxx Any help would be awesome. I can toss out a few coins for your trouble

[SeaSoul]

need a bigger exchange

tweet bittrex about this coin

[uray]

ok i give up for a moment, max i can get for R9 280x is 10 Mh/s, only tested on 280x and 7970
its about 9.5 on 7970



i will release the miner tomorrow, too tired after head banging on openCL code, i need too sleep.
i promise i will release it tomorrow, just let me enjoy lead-time on this miner first, its an easy
optimization though, i believe djm (which this miner is based) already made a miner that is
faster than this

i am a stupid coder..

[Monopoly]

ok i give up for a moment, max i can get for R9 280x is 10 Mh/s, only tested on 280x and 7970
its about 9.5 on 7970



i will release the miner tomorrow, too tired after head banging on openCL code, i need too sleep.
i promise i will release it tomorrow, just let me enjoy lead-time on this miner first, its an easy
optimization though, i believe djm (which this miner is based) already made a miner that is
faster than this

i am a stupid coder..

Thank you . Thanksssssssssssssssss

i am a stupid coder..

No
For everything you must get money for devepoler it  except sceince .

[djm34]

ok i give up for a moment, max i can get for R9 280x is 10 Mh/s, only tested on 280x and 7970
its about 9.5 on 7970



i will release the miner tomorrow, too tired after head banging on openCL code, i need too sleep.
i promise i will release it tomorrow, just let me enjoy lead-time on this miner first, its an easy
optimization though, i believe djm (which this miner is based) already made a miner that is
faster than this

i am a stupid coder..

nope, I spend more time trying to optimise ccminer actually

[Grifftech2k4]

ok i give up for a moment, max i can get for R9 280x is 10 Mh/s, only tested on 280x and 7970
its about 9.5 on 7970



i will release the miner tomorrow, too tired after head banging on openCL code, i need too sleep.
i promise i will release it tomorrow, just let me enjoy lead-time on this miner first, its an easy
optimization though, i believe djm (which this miner is based) already made a miner that is
faster than this

i am a stupid coder..

nope, I spend more time trying to optimise ccminer actually

Got an optimized one for Whirlcoin? Getting a little over 13,000 kh/s with my 780Ti.

[DrSnAzZy]

ok i give up for a moment, max i can get for R9 280x is 10 Mh/s, only tested on 280x and 7970
its about 9.5 on 7970


i will release the miner tomorrow, too tired after head banging on openCL code, i need too sleep.
i promise i will release it tomorrow, just let me enjoy lead-time on this miner first, its an easy
optimization though, i believe djm (which this miner is based) already made a miner that is
faster than this

i am a stupid coder..

nope, I spend more time trying to optimise ccminer actually

Got an optimized one for Whirlcoin? Getting a little over 13,000 kh/s with my 780Ti.

Ever tried ccminer? much better on the nvidia cards. Easy to configure. Cryptominingblog has the download

[Mxrider420z]

Keep Whirling

[RazvanO]

Just listed on Cryptoine!

https://cryptoine.com/trade/whrl_btc

I want to buy some but i've never heard about this exchange! Anyone tried it before!?

Trying it now, seems like there are no fake orders and my Whirl deposit was credited very fast. So far, so nice, we'll see.

Please look at cryptoine announce: https://bitcointalk.org/index.php?topic=694710

There is no fake orders and more importantly there is no fake (robot) trades.
 
0% Trading fee!

[david1365]

Guys and dev you missed this
https://www.swisscex.com/market/WHRL_BTC

LOL Such a stupid buyers, also stupid sellers on swisscex 

[discodancer]

Just wondering if altmine's hashrates correct? Dwarf says I am mining with 5mhs but when I try altmine it goes to 2-3. And the individual worker page is also not working on altmine.