ANON KORE Address to Address Phone Calls.
ALPHA is Testing Mode so Report all "NEW" Bugs to Eurbids.
FYI: If you Router supports UPNP you don't need to forward
the SIP Port 5060 manually, UPNP does the work for you.
If your Router doesn't support the UPNP Then Voice will only work in one direction.
This means you have to forward the pot 5060.
STEPS: #1-3 for Direct and Buddy List Calling Setup:
1-Go to the "Receive Address Tab" and create a new address.
Label it however you like. Might makes sense to designate it your VoIP Address.
2-Right Click the Address and choose the bottom option "Set VoIP Account".
3-Go to "VoIP Calls" tab and click on the "REGISTER" box.
STEPS: #4 and #5 for Direct Calling Only:
4-Enter the Address you'd like to call in the "Direct Calling/IM" box near the bottom.
You will see two tiny boxes on the right. Click on the "Left Tiny Box" to dial.
(
DO NOT click the "Call Buddy" box)
5-Watch the "Call Status" box, You will see it say "Calling".
Whoever is Receiving the call has to accept the call by clicking "Answer Call"
that will show in the box above the "Call Status" box.
To hang up simply click "Hang Up".
ENJOY!
NOTE: The call goes through very fast nearly instantly.
Thanks Eurbids for all your hard work and Fast Bug Fix!