What is it that determines if the PSU is suitable. Is it the overal wattage,
look at the 12volt rail
Limited Edition GOLD fan version of the Alpine PSU
Features
SLI ready psu with 4 x Sata
Silent 120mm fan with low noise technology <20dBA
Packaged in designer retail box
Quiet fan with thermal control
Black coated casing
24 pin; 4 Pin (12V) (Sleeved) ; 2 x 6 pin PCI-e / SLI ready; 4 x Sata; 3 x 4 pin; 1 x FDD
Cable length 45cm
Meets Intel v2.03 enhanced +12V
230V with rear on/off power down button
Over-voltage and current protection +3.3V;+5V;+12V
100% Burn in and hipot tested; short circuit protection
EMI Filter built in
CE/ FCC/ UL approved
ROHS Compliant
+3.3V 22A; +5V 32A;
+12V 34A; -12V 0.5A; +5VSB 2.0A
34 x 12 = 408 watts . At best
I would not use this psu.