confused about power for spondoolies sp30 Yukon

[GrandMasterB]

http://www.spondoolies-tech.com/products/sp30-yukon-september-batch-2


Specs say 3000w nominal draw but it comes with 2x 1200w PSU?

In the states wont that translate to less than 3kw?

Pretty new to mining so sorry if it is a dumb qiestion. Want to pick up an Antminer s3 but their site doesnt appear to updated and their twitter has been dead since beginning of month.  Cant find one near OC cali. thinking about hopping in on the next gen miners when i found this. Im still a noob.

[Tupsu]

http://www.spondoolies-tech.com/products/sp30-yukon-september-batch-2


. Want to pick up an Antminer s3 but their site doesnt appear to updated ...

Press F5
They put just today a new product for sales.  https://bitmaintech.com/productDetail.htm?pid=00020140731043909819C9CL7qf4064A

[jowaybea]

They also raised the price of Batch4 S3's.  They were 0.64btc, now 0.68btc.  Maybe because the $$/BTC has dropped?

[GrandMasterB]

That's neat i will get one if i get an s3. Anyone have some knowledge they can help me with about the spondoolies?

How would 2x 1.2kw PSUs support a 3kw  power usage?

[wh00per]

That's neat i will get one if i get an s3. Anyone have some knowledge they can help me with about the spondoolies?

How would 2x 1.2kw PSUs support a 3kw  power usage?

The SP30 will come with two power supplies, either Emerson or Murata.

1200W is the power supply output. 1500W is the maximum power draw at the wall for the Emerson PSU.
Murata power supplies have a power draw at the wall of a little more than 1600W. That's when using 200-240V input.

For 90-120V at input the net power output is lower.

[GrandMasterB]

OK i think I understand where i went wrong. I thought the miner wanted 3kw and the PSU's were supplying 2.4kw.

 what the ad means is the miner will draw 2400kw from the psu's which is 3kw from the wall using an 80 plus power supply.

 

[QuiveringGibbage]

should you consider going towards SP30; consider Hosting solutions.

https://bitcointalk.org/index.php?topic=622998.0 (H/w Hosting Directory & Reputation)

most domestic premises will require 2 separate circuits to power the SP30. and if you are in USA, 110v will not get the most out of your machine.

Happy Mining
QG

[vr4dude316]

Hello.  newbie here.  just purchased an sp30 yukon on minersource.net.  received the unit last week.  the shipping box was damaged a little on the bottom.  got firmware updated and was ready to rock.  the first 3 loops, Loop0, Loop1 and Loop2 will not power up.  I have been on support with spondoolies and they cannot get this working either.

I've cracked the case and inspected the top board.  nothing looks physically damaged, but they will just not power up.  i have tried reseating the connections I could, no dice.

any thoughts?  i have marked them as removed for now.

 2.6.13-x Uptime:314 | FPGA ver:62 | BIST in 116 -----BOARD-0----- PSU[NEW-MURATA]: 754->(668w/668w)[668 664 664] (->646w[646 646 646]) (lim=1250) 0c 1019GH cooling:0/0x0 -----BOARD-1----- PSU[NEW-MURATA]: 1420->(1248w/1248w)[1240 1248 1246] (->1199w[1199 1199 1199]) (lim=1250) 0c 2294GH cooling:0/0x0 LOOP[0] OFF TO:0 (test serial failed or something) 0: disabled (REMOVED/DISABLED) 1: disabled (REMOVED/DISABLED) 2: disabled (REMOVED/DISABLED) LOOP[1] OFF TO:0 (test serial failed or something) 3: disabled (REMOVED/DISABLED) 4: disabled (REMOVED/DISABLED) 5: disabled (REMOVED/DISABLED) LOOP[2] OFF TO:0 (test serial failed or something) 6: disabled (REMOVED/DISABLED) 7: disabled (REMOVED/DISABLED) 8: disabled (REMOVED/DISABLED) LOOP[3] ON TO:0 (w:40) 9: DC2DC/1/:[vlt1:699 vlt2:706(DCl:706 Tl:794 Ul:738) 85W 121A 53c] ASIC:[ 85c (125c) 890hz(BL: 890) 12 (E:192) F:0 L:0] 10: DC2DC/1/:[vlt1:722 vlt2:725(DCl:725 Tl:794 Ul:738) 89W 123A 58c] ASIC:[100c (125c) 880hz(BL: 880) 15 (E:193) F:0 L:0] 11: DC2DC/1/:[vlt1:714 vlt2:717(DCl:717 Tl:794 Ul:738) 84W 118A 57c] ASIC:[ 85c (125c) 880hz(BL: 880) 13 (E:193) F:0 L:0] LOOP[4] ON TO:0 (w:35) 12: DC2DC/1/:[vlt1:724 vlt2:730(DCl:730 Tl:794 Ul:738) 89W 123A 66c] ASIC:[100c (125c) 890hz(BL: 890) 8 (E:193) F:0 L:0] 13: DC2DC/1/:[vlt1:722 vlt2:727(DCl:727 Tl:794 Ul:738) 89W 123A 65c] ASIC:[105c (125c) 890hz(BL: 890) 16 (E:193) F:0 L:0] 14: DC2DC/1/:[vlt1:716 vlt2:719(DCl:719 Tl:794 Ul:738) 84W 118A 51c] ASIC:[ 85c (125c) 850hz(BL: 850) 11 (E:193) F:0 L:0] LOOP[5] ON TO:0 (w:25) 15: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:738) 58W 89A 29c] ASIC:[ 85c (125c) 720hz(BL: 720) 7 (E:193) F:0 L:0] 16: DC2DC/1/:[vlt1:652 vlt2:658(DCl:794 Tl:794 Ul:738) 60W 92A 29c] ASIC:[ 85c (125c) 740hz(BL: 740) 4 (E:193) F:0 L:0] 17: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:738) 58W 89A 24c] ASIC:[ 85c (125c) 720hz(BL: 720) 14 (E:193) F:0 L:0] LOOP[6] ON TO:0 (w:31) 18: DC2DC/1/:[vlt1:652 vlt2:658(DCl:794 Tl:794 Ul:738) 68W 104A 40c] ASIC:[ 85c (125c) 840hz(BL: 840) 10 (E:193) F:0 L:0] 19: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:738) 62W 94A 41c] ASIC:[ 85c (125c) 750hz(BL: 750) 7 (E:193) F:0 L:0] 20: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:738) 67W 102A 47c] ASIC:[ 85c (125c) 810hz(BL: 810) 14 (E:193) F:0 L:0] LOOP[7] ON TO:0 (w:32) 21: DC2DC/1/:[vlt1:652 vlt2:658(DCl:794 Tl:794 Ul:738) 68W 104A 48c] ASIC:[ 85c (125c) 820hz(BL: 820) 9 (E:193) F:0 L:0] 22: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:738) 63W 97A 46c] ASIC:[ 85c (125c) 770hz(BL: 770) 11 (E:193) F:0 L:0] 23: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:738) 68W 104A 44c] ASIC:[ 85c (125c) 840hz(BL: 840) 12 (E:193) F:0 L:0] LOOP[8] ON TO:0 (w:31) 24: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:738) 70W 107A 52c] ASIC:[ 85c (125c) 850hz(BL: 850) 13 (E:193) F:0 L:0] 25: DC2DC/1/:[vlt1:652 vlt2:656(DCl:794 Tl:794 Ul:738) 60W 92A 52c] ASIC:[ 85c (125c) 750hz(BL: 750) 9 (E:193) F:0 L:0] 26: DC2DC/1/:[vlt1:650 vlt2:656(DCl:794 Tl:794 Ul:738) 67W 102A 54c] ASIC:[ 85c (125c) 820hz(BL: 820) 9 (E:193) F:0 L:0] LOOP[9] ON TO:0 (w:31) 27: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:738) 62W 94A 56c] ASIC:[ 85c (125c) 770hz(BL: 770) 5 (E:193) F:0 L:0] 28: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:738) 73W 112A 67c] ASIC:[100c (125c) 870hz(BL: 870) 12 (E:192) F:0 L:0] 29: DC2DC/1/:[vlt1:652 vlt2:658(DCl:794 Tl:794 Ul:738) 68W 104A 51c] ASIC:[ 85c (125c) 820hz(BL: 820) 14 (E:193) F:0 L:0] [H:HW:3313Gh (3000),DC-W:1505,L:0,A:21,MMtmp:0 TMP:(24/24)=>=>=>(60/60 , 62/62)] Pushed 33 jobs , in HW queue 4 jobs (sw:2, hw:2)! min:7 wins:225[this/last min:3/51] bist-fail:212, hw-err:0 leading-zeroes:42 idle promils[s/m]:0/0, rate:3565gh/s asic-count:147 (wins:2+1) wall watts:2174 Fan:100, conseq:200 AC2DC BAD: 0 0 R/NR: 302/0 RTF asics: 0 FET: 0:3 1:3 0 restarted 0 reset 0 reset2 0 fake_wins 0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble 0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn 0 purge_queue3 0 bad_idle 0 err_murata Adapter queues: rsp=2, req=20

[dogie]

I have been on support with spondoolies and they cannot get this working either.

If they [Remo / Zvi] can't debug it, its unlikely any of us will be able to. My SP35 to is sick and has a non operational board for unknown reasons. If you've just purchased it from minersource, contact them and arrange an RMA. They can be quite difficult to get a response out of if its not for a sale but keep trying.

[vr4dude316]

Yes I see this now.  They tell me they are submitting an insurance claim with their carrier.  i cannot get anyone to call me or commit to an RMA.  I am about ready to dispute the trans with my cc company.  I just want a fully functional unit

[sorry2xs]

well how about info on a replacement psu for an sp30 preferably an emerson with the correct firmware, also if the asic is removed they have removed the have to be renabled at the factory always disable never remove.