[ANN][POOL] HASH-TO-COINS

[catcorp]

I'd like to know if more people have the problem where you mine for a while but all it finds are stale shares. "submitting as pool requested"; it's mining at 4 Mhs.
After like 15 minutes it stops mining and does nothing else then to tell me that it's setting a new difficulty; mining at less than 500 khs.
Is something wrong?
I'm using the Moonlander 2.

[Jluyt123]

Hi all -

I have been trying to get my L3+ working on this pool now for almost 2 days. It seems to hash, but my balances does not increase and I am receiving no payouts!

Initially, I had it set to only mine LTC (no autoswitch). Then out of desperation I enabled autoswitch, but same result.

I am running on:
SERVER: stratum+tcp://hash-to-coins.com:3333
PASS: something (no d=)

Any help will be greatly appreciated.

[kurbeks]

Hi all -

I have been trying to get my L3+ working on this pool now for almost 2 days. It seems to hash, but my balances does not increase and I am receiving no payouts!

Initially, I had it set to only mine LTC (no autoswitch). Then out of desperation I enabled autoswitch, but same result.

I am running on:
SERVER: stratum+tcp://hash-to-coins.com:3333
PASS: something (no d=)

Any help will be greatly appreciated.

Becuse pool haven't found single LTC block in time you mined. ITs not best pool to mine LTC, too low hashrate.

[Jluyt123]

Thanks. I am finally mining "something" :-)

Since I have an L3+, I have read 2 perspectives on difficulty. Some here set their difficulty to d=65536. I also read setting it too high can be bad for the miner. Any feedback on that? also the d=65536 foes into the password fiend right?

[CryptoAddiction315]

Thanks. I am finally mining "something" :-)

Since I have an L3+, I have read 2 perspectives on difficulty. Some here set their difficulty to d=65536. I also read setting it too high can be bad for the miner. Any feedback on that? also the d=65536 foes into the password fiend right?

I'm mining with d=262144 on a L3+ and get a stable hashrate. I use that difficulty pretty much everywhere now. I have had some issues with Hash to coins being extremely slow in worker status and stats.

I added a new worker to mine EMC2 this morning, it took a half an hour to show as mining EMC2, then I switched to a totally seperate pool all together and H2C still showed me mining there. I don't like how long their stats take to update when compared to like Litecoinpool or even prohashing and their stats suck.

Like right now Hash to coins says I don't have any active workers, my miners have been mining there for at least 40 minutes. The lack of this being reflected makes me want to mine elsewhere.

I am having the same issue! mining program says im getting accepts but H2C shows no active workers! this is first time i have had this issue

[ivymoss]

Same issue here. I'm only mining with a few moonlander 2s, but I switched away because I thought there was something wrong, only to find out later that I had been mining, but that the stats are just lagging.

[GoldBuffalo]

I am only a hobby miner with 8 gridseed orbs so just under 3 Mh/s.  Been using this pool for about a week now and it is the best pool I have found yet.  Have a few more gridseed miners I will be adding soon as I get power suppies and pi's.   

Can you post your stratum info? I have Gridseed blades and cannot login, have no problem with other pools. I am using CGMiner, says it cannot find server.

[RealDe14Mx]

is it any minimum limit in the amount of coins a miner can withdraw from hash-to-coins? I just mined a few fractions of EMC2 as a test and i withdraw that fractions to check my wallet (Excalibur 0.13.48.0) but days has pased and i still do not see that transaction in my wallet. thanks in advance.

[plasmodesmata]

I wanted to use this pool but there were no clear, step by step, instructions on how to set it up. Nicehash was so easy...

[2Laidback]

This is starting to suck.  Got my L3+ hooked up but cannot connect to H2C.  I have tried all ports (3333,4444 and 5555) with and without #xnsub added.  I keep getting the status of "Dead"" and then it skips down to zpool setting and works perfectly.
I want to mine EMC2. so frustrating.
Please help a brother out!!

[kvashala]

hello!!!

I'm sending more than 10 mail to you!!! i make withdrawal from hash-to-coins.com to www.cryptopia.co.nz 11441 amount of WDC coin. but coins lost!!! i send you also screen shots of my page!! make something and stop ignore me !!!

[b4ds3ct0r]

Hi. how many coins do you recommend to mine? 5 or 6 or less, or better more than few?

I usually manually decided which coins to mine. Otherwise you will get 20 coins each worth 5 cents and won't be able to sell them.

How do you go by choosing best coins to mine? If you dont mind to tell, what do you look for when you choose a coin? Can you please give us some insider tips?

[Jluyt123]

My L3+ works just fine. My config is:

URL
stratum+tcp://hash-to-coins.com:4444

Worker:
username.workername

Password:
Yourpassword d=65536

Hope this helps. Mine runs great

[Jluyt123]

I had the same problem with payouts. Take these steps:

Enter your wallet addresses for the coins you want to mine. Remember these are not BTC wallet addresses, but addresses of the perspective coins. Use Cryptopia and/or Bittrex. Disable all the coins you DO NOT want to mine.

Initially I tried to only mine LTC and got no payout. Now I don't even try LTC on this pool, I use a different pool for LTC. If there are no blocks, you get no payout of course.

Hope this helps

[b4ds3ct0r]

Also since it is free to withdraw you should do it like everyday or every other day.
Do not wait until a lot of coins, something like this happens you loose more coins this way.

[kurbeks]

Hi. how many coins do you recommend to mine? 5 or 6 or less, or better more than few?

I usually manually decided which coins to mine. Otherwise you will get 20 coins each worth 5 cents and won't be able to sell them.

How do you go by choosing best coins to mine? If you dont mind to tell, what do you look for when you choose a coin? Can you please give us some insider tips?

There are currently omly few coins worth minning i short therm. Pool operator really should add new coins and delete some of old ones. You cna multi with NLG/LINX/GAME/DGB , NOTE and EMC2 maybe.

[vilpi]

Hi,
I am very new to mining.
It has been for almost 20 hours that I am continuously mining XVG with 630 MH/s, however, I have received nothing in my balance.
is that normal? what happens if I stop and start again after a day. do I lose what I have done or what?
Sorry if my question might be so stupid to you guys.
thanks.

[kurbeks]

Hi,
I am very new to mining.
It has been for almost 20 hours that I am continuously mining XVG with 630 MH/s, however, I have received nothing in my balance.
is that normal? what happens if I stop and start again after a day. do I lose what I have done or what?
Sorry if my question might be so stupid to you guys.
thanks.

Shows up as uncorfirmed?

[vilpi]

Hi,
I am very new to mining.
It has been for almost 20 hours that I am continuously mining XVG with 630 MH/s, however, I have received nothing in my balance.
is that normal? what happens if I stop and start again after a day. do I lose what I have done or what?
Sorry if my question might be so stupid to you guys.
thanks.

Shows up as uncorfirmed?

Thank you for your reply. No. there is nothing there. in the balance page and transactions, there is nothing.  However, the first time I tried few days back for like 1 hour something, I got a small amount which I withdrew to test my wallet. it worked. So in transactions, my previous one is there, both the credit and debt. but after that for the time that I said I have been mining, I do not see anything new in my balance or transactions.
 

[404Revolution]

EDIT
I believe the hash rate is just taking longer than usual to show up but all shares are being credited. Still, exercise caution as you always should.