Atomar
|
|
August 26, 2014, 06:02:28 AM |
|
I did built a cardboard case for the S1 just to try to cool it down. I did not change the fan though. It did NOT help at all. Still runninig at 46°C with fan Speed at 2220 and freq. 375. Makes 190 Gh/s avg.
|
|
|
|
kabopar
|
|
August 26, 2014, 06:56:22 AM |
|
Has anyone received the upgrade kit? Bitmain promised shipping on the 20 of Aug or earlier, but so far it is 'unshipped'
Cheers
The promised shipping date is 20 of September! Very true!!! (how could I miss a whole month?!) Cheers Your activity count *is* 420 at the moment. ... Does '420' make me absent minded?....
|
|
|
|
kabopar
|
|
August 26, 2014, 06:57:39 AM |
|
How many of you ordered the s3 kit?
I did, it's probably quite close to replacement, but that would be missing the tinkering fun... Cheers
|
|
|
|
ftoole
|
|
August 27, 2014, 08:52:38 PM |
|
I dont think anyone has since you can still sell S1 for $110 on ebay.
S1 may or may not go up big time at first till we do . Id rather pay 150 US in the US for one then buy it off ebay, in some cases eBay is great but as some one said about eBay the cheap ones on eBay are most likely on there last legs and well used and sense no one really knows for sure that Ive seen how the upgrade works i mean what condition the old S1 need to be in what does it replace . etc etc . expect what the add said you get two boards and some other stuff which looks like a normal upgrade kit do we need the old boards etc etc I might be wrong can't say i only buy certain things off eBay then it's new. . i see why he would require the two kit buy some will buy the kits just to build two S3 at a very reduced price if all you need is the heat sinks and frame . over the years I've found when doing most upgrades you don't need the old one , its just makes it easier if you have it . well any way I'm done just my 2s worth sense i have not seen just what it does . my bad you get with the kit 1. 2 units of hash boards 2. 2 units of mini customized heat sink 3. 1 unit of adapter board 4. 1 unit of control board holder 5. 1 fan including the fan's cover and screws 6. 4 units of white plastic brackets, 2 units of 2x10 pin cables, 8 screws, 8 spring screws, 1 bag of thermal paste buy looking at that you won't need the S1 in any way just a the kit and a little no know how unless the S1 has some thing on it you may need. hm can't wait two S3 for the price of one all you do is put it to gather which some can't do . 2 major items you need off your s1 are the controller card with the nic and the heat sinks in the middle. The heat sinks in the kit go on the outside of the board. Like on the new s3.
|
|
|
|
ftoole
|
|
August 27, 2014, 08:53:56 PM |
|
I did built a cardboard case for the S1 just to try to cool it down. I did not change the fan though. It did NOT help at all. Still runninig at 46°C with fan Speed at 2220 and freq. 375. Makes 190 Gh/s avg.
Use the pencil mod to undervolt you will drop to 140 gh but the temp will drop to 30.
|
|
|
|
marioborges
Member
Offline
Activity: 72
Merit: 10
|
|
September 15, 2014, 02:22:02 PM |
|
Someone Can Please Help! I have 2 broken control boards of my old Antminers S1. I need these boards to the Ugrade Kit?
Please inform which part of old Antminer S1 will be in use in new Upgrade Kit, it seems everything is in Upgrade Kit. Nothing of my old antminers - except the support structure - will be recycled even the old fans are not in use with the new Kit, correct?
|
|
|
|
J4bberwock
|
|
September 15, 2014, 02:41:37 PM |
|
Someone Can Please Help! I have 2 broken control boards of my old Antminers S1. I need these boards to the Ugrade Kit?
Please inform which part of old Antminer S1 will be in use in new Upgrade Kit, it seems everything is in Upgrade Kit. Nothing of my old antminers - except the support structure - will be recycled even the old fans are not in use with the new Kit, correct?
please elaborate "broken". There might be a way to get them back to life. Have a look at Taugeran's post regarding unbricking.
|
|
|
|
Taugeran
|
|
September 15, 2014, 03:43:41 PM |
|
Someone Can Please Help! I have 2 broken control boards of my old Antminers S1. I need these boards to the Ugrade Kit?
Please inform which part of old Antminer S1 will be in use in new Upgrade Kit, it seems everything is in Upgrade Kit. Nothing of my old antminers - except the support structure - will be recycled even the old fans are not in use with the new Kit, correct?
please elaborate "broken". There might be a way to get them back to life. Have a look at Taugeran's post regarding unbricking. Ill even comment on this. If you do not feel comfortable messing around with/ or do no have immediate access to a uart bridge, I am more than willing to offer my service*** ***we can discuss options, if you desire my help
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
wpgdeez
|
|
September 15, 2014, 03:52:29 PM |
|
Wish this was priced better, would have loved to upgrade and double my hash but at this price better to undervolt and slowly squeeze every penny out off these guys.
|
|
|
|
marioborges
Member
Offline
Activity: 72
Merit: 10
|
|
September 16, 2014, 02:29:58 PM |
|
Hi, Broken means, only the ventilator are working. I try to connect blades to other controller and blades are fine. First this problem starts without contacts to the blades, controller blink but don´t start working. Now Controller don't make nothing, is dead I Can't find the Taugeran's post regarding unbricking. Yes Taugeran, your service as welcome, please Mp.
|
|
|
|
J4bberwock
|
|
September 16, 2014, 03:30:06 PM |
|
Hi, Broken means, only the ventilator are working. I try to connect blades to other controller and blades are fine. First this problem starts without contacts to the blades, controller blink but don´t start working. Now Controller don't make nothing, is dead I Can't find the Taugeran's post regarding unbricking. Yes Taugeran, your service as welcome, please Mp. Check the voltage coming out of the mp1484. The hashing board shouldn't work without the +3.3, but check it just in case, it will take 2 minutes. The power header for the controller only have 4 pins Pins 1 and 2 are ground. Pins 3 and 4 are +3.3v
|
|
|
|
ftoole
|
|
September 16, 2014, 04:32:08 PM |
|
They have started shipping them.
|
|
|
|
kabopar
|
|
September 17, 2014, 01:07:27 AM |
|
My upgrade kit was shipped, due here on 19/09. Looking forward to the efficiency and hash rate improvement compared to the S1's.
Cheers
|
|
|
|
bmoscato
|
|
September 18, 2014, 02:57:35 AM |
|
Does anyone know if the upgrade uses a new controller card? It doesn't list 1 in the details.
|
|
|
|
drukoz2
Member
Offline
Activity: 395
Merit: 10
|
|
September 18, 2014, 03:38:51 AM |
|
My upgrade kit was shipped, due here on 19/09. Looking forward to the efficiency and hash rate improvement compared to the S1's.
Cheers
mine was not shipped yet im guessing by tommorow morning it will be marked as shipped
|
|
|
|
Taugeran
|
|
September 18, 2014, 05:48:32 AM |
|
Does anyone know if the upgrade uses a new controller card? It doesn't list 1 in the details.
It includes an adapter for use with the s1 controller
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
Cryobeast
Newbie
Offline
Activity: 2
Merit: 0
|
|
September 18, 2014, 06:17:35 AM Last edit: September 18, 2014, 07:59:34 AM by Cryobeast |
|
Just got my tracking number said 6 upgrade kits are on the way and should be here tomorrow 9/18 etc.. I was actually worried, since I purchased (2) S3 miners and the kits. Bitmain just told me they shipped separate, and I've already got the order for the S3's. He just sent the tracking info about 10minutes ago, and responded in 1 hour . Nice! Oh for those interested I'll have a couple extra S1 upgrade kits.. if someone wants to buy em off me. I oversold my S1's on Ebay and now will have two extra kits left over once they get here. PM if your interested. I figure if someone wants to toy around with one kit.. this maybe an option? I also will have several fans and screw kits for the second missing fan if needed. I'll Know more once I can spend a few minutes looking over the contents coming. I'll probably be asking at cost of the kit plus shipping just to get rid of the extra two.
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
September 18, 2014, 11:13:49 AM Last edit: September 18, 2014, 11:47:42 AM by toptek |
|
Sense bitmain has two videos on YouTube how the upgrade works it seems to upgrade from a S1 to S3 you need the S1 controller, both heat sinks unless you oped to water cool i think those heat sink should work the old screws form the Old hash boards the frame from the S1 unless you plan to customize a case around the upgrade or use a custom case if you have one .T paste then your set so i can see were using the old hash boards still might have some use left not much but some.
I think they did a really nice job with the up grade i for one plan to get two kits or working on getting two . My S 3 will be here some time next week , i want the up grade more now not for the hash power more for the Uber fun of doing it and ofc for the hash power . i did read some place S2 user will get a upgrade kit just no eta yet with speeds up to 2 TH .
|
|
|
|
soptik
Newbie
Offline
Activity: 38
Merit: 0
|
|
September 18, 2014, 11:18:06 AM |
|
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
September 18, 2014, 11:22:41 AM |
|
Someone Can Please Help! I have 2 broken control boards of my old Antminers S1. I need these boards to the Ugrade Kit?
Please inform which part of old Antminer S1 will be in use in new Upgrade Kit, it seems everything is in Upgrade Kit. Nothing of my old antminers - except the support structure - will be recycled even the old fans are not in use with the new Kit, correct?
yuo tube video just how it works . https://www.youtube.com/watch?v=bS7Mir7K_Pc&feature=youtu.bemore detailed one . https://www.youtube.com/watch?v=Zhx1jiuaJY8
|
|
|
|
|