mconstenla11
Newbie
Offline
Activity: 11
Merit: 0
|
|
October 15, 2014, 09:27:50 PM |
|
Hello , someone will have idea about what may be going to the board 11 which stopped working from one moment to another https://i.imgur.com/5bW35r9l.png
|
|
|
|
crusoe1234
Newbie
Offline
Activity: 17
Merit: 0
|
|
October 18, 2014, 06:44:13 PM |
|
I lost a hashboard a few days ago. Today I got a chance to pull it from the heat sink and find the burnt core. Originally I thought I could cut it out (like the old avalons). Instead I popped out R44, I lost 2 extra cores in doing this, but at least I have an operational hash board again. I hope this is of use to someone out there.
|
|
|
|
cesarm
Member
Offline
Activity: 92
Merit: 10
|
|
October 27, 2014, 10:44:52 AM |
|
Dogie, Do you have any info on the USB adapters that could be used with the Tube ?
I will not buy a Prisma, but I would like to use the USB adapter + Cubieboard with my two tubes.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
October 27, 2014, 11:47:47 AM |
|
Dogie, Do you have any info on the USB adapters that could be used with the Tube ?
I will not buy a Prisma, but I would like to use the USB adapter + Cubieboard with my two tubes.
Potentially in my Prisma guide if it comes with a USB adapter.
|
|
|
|
Luke-Jr
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
October 30, 2014, 10:16:21 AM |
|
Pulled link as requested. I was wondering do you know if FC plans to update the controller's software. To have an auto pool switch option like the antminer s-3's have?
You can do it manually via BFG proxy if its critical for now The BFG proxy starts showing "error from bufferevent" and crashes the controller. Known bug, only solution is to hard reset BFGMiner and the controller for now. This doesn't occur with other pools? O.o Any idea what triggers it?
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
October 30, 2014, 10:22:03 AM |
|
Pulled link as requested. I was wondering do you know if FC plans to update the controller's software. To have an auto pool switch option like the antminer s-3's have?
You can do it manually via BFG proxy if its critical for now The BFG proxy starts showing "error from bufferevent" and crashes the controller. Known bug, only solution is to hard reset BFGMiner and the controller for now. This doesn't occur with other pools? O.o Any idea what triggers it? I don't have more info on it as I didn't use BFG as a proxy, have to wait for others to comment.
|
|
|
|
helipotte
|
|
October 30, 2014, 02:45:09 PM |
|
Pulled link as requested. I was wondering do you know if FC plans to update the controller's software. To have an auto pool switch option like the antminer s-3's have?
You can do it manually via BFG proxy if its critical for now The BFG proxy starts showing "error from bufferevent" and crashes the controller. Known bug, only solution is to hard reset BFGMiner and the controller for now. This doesn't occur with other pools? O.o Any idea what triggers it? Network solving a block it seems. Had to switch to Ghash.io because of this.
|
|
|
|
apollojmr
Sr. Member
Offline
Activity: 311
Merit: 250
The Power Of The Coin Is Awesome!!
|
|
November 03, 2014, 12:20:06 AM |
|
I am having a problem all of a sudden..my be controller is not being recognized but the lights are coming on..? I have reset it and tried manually setting the address but I am still having no luck. Is it possible I fried this thing? It gets hot. I appreciate anyones feedback.
EDIT::I am getting blinking lights when eth is inserted..? I cannot find on network however..?
|
What you think you become. Bitrated user: apollojmr.
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
November 03, 2014, 12:34:36 AM |
|
I had mine do the same thing...controller was dead for me. You should try and get one of those USB adapters and use a Pi. The BE controllers are junk.
|
|
|
|
vortexz
Legendary
Offline
Activity: 1120
Merit: 1001
|
|
November 11, 2014, 07:41:02 PM |
|
I have installed my PRISMA via BE controller I have done all settings to the controller, changed gw and primary dns to the IP of the router, changed controller's IP to the router's class Everything seems to work fine, I have entered the BTCGUILD stratrum server etc.
problem is : my PRISMA is running at 550 GH/S only Why ?
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
November 11, 2014, 08:48:48 PM |
|
I have installed my PRISMA via BE controller I have done all settings to the controller, changed gw and primary dns to the IP of the router, changed controller's IP to the router's class Everything seems to work fine, I have entered the BTCGUILD stratrum server etc.
problem is : my PRISMA is running at 550 GH/S only Why ?
Need screenshots
|
|
|
|
hedgy73
Legendary
Offline
Activity: 1414
Merit: 1077
|
|
November 16, 2014, 03:39:58 PM |
|
Hey dogie great guide as always Did anyone manage to find quieter fans for these? The standard one on my tube is driving me nuts
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
November 16, 2014, 04:51:58 PM |
|
Hey dogie great guide as always Did anyone manage to find quieter fans for these? The standard one on my tube is driving me nuts Quietening kit. Same for the Prisma as well.
|
|
|
|
hedgy73
Legendary
Offline
Activity: 1414
Merit: 1077
|
|
November 16, 2014, 06:49:35 PM Last edit: November 16, 2014, 07:26:15 PM by hedgy73 |
|
Hey dogie great guide as always Did anyone manage to find quieter fans for these? The standard one on my tube is driving me nuts Quietening kit. Same for the Prisma as well. Thank you very much . Do you recommend one on the front of each tube in place of the standard fan or both on one tube front and rear?
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
November 18, 2014, 04:44:56 AM |
|
Hey dogie great guide as always Did anyone manage to find quieter fans for these? The standard one on my tube is driving me nuts Quietening kit. Same for the Prisma as well. Thank you very much . Do you recommend one on the front of each tube in place of the standard fan or both on one tube front and rear? You might *just* be able to get away with one if you have a cold ambient but its really pushing it. I'd recommend two (one front one back), you'll get similar airflow but an acceptable, lower pitched noise.
|
|
|
|
hedgy73
Legendary
Offline
Activity: 1414
Merit: 1077
|
|
November 18, 2014, 06:45:56 AM |
|
Hey dogie great guide as always Did anyone manage to find quieter fans for these? The standard one on my tube is driving me nuts Quietening kit. Same for the Prisma as well. Thank you very much . Do you recommend one on the front of each tube in place of the standard fan or both on one tube front and rear? You might *just* be able to get away with one if you have a cold ambient but its really pushing it. I'd recommend two (one front one back), you'll get similar airflow but an acceptable, lower pitched noise. That's great thanks very much, I've ordered what you recommended ( from ebay though as I had some paypal funds to use up ). I'll let you know how I get on with them.
|
|
|
|
hedgy73
Legendary
Offline
Activity: 1414
Merit: 1077
|
|
November 18, 2014, 08:12:40 AM |
|
Is there any way of telling operating temperature of these do you know? I can't see it in software stats anywhere.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
November 18, 2014, 07:25:31 PM |
|
Is there any way of telling operating temperature of these do you know? I can't see it in software stats anywhere.
No that's why you have to be careful, BE200s don't have onboard thermal sensors.
|
|
|
|
hedgy73
Legendary
Offline
Activity: 1414
Merit: 1077
|
|
November 18, 2014, 07:48:36 PM |
|
Is there any way of telling operating temperature of these do you know? I can't see it in software stats anywhere.
No that's why you have to be careful, BE200s don't have onboard thermal sensors. Ok thanks I thought that might have been the case.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
November 18, 2014, 07:57:20 PM |
|
Is there any way of telling operating temperature of these do you know? I can't see it in software stats anywhere.
No that's why you have to be careful, BE200s don't have onboard thermal sensors. Ok thanks I thought that might have been the case. RE your PM about airflow, anything we put on will be less than the stock as the stock prioritises low temperatures over anything else. That doesn't mean that our solution isn't sufficient though.
|
|
|
|
|