[POOL CLOSED] BoostPool.com - Groestlcoin payouts

[srcxxx]

bitcoin payment complete

Today was a good day and I gave out a 10% bonus to GRS miners. So each MH/s was 1100 GRS instead of 1000 GRS. Enjoy!

PS: Tomorrow's GRS per MHS value is 1050, GRS support level: 210 Satoshi.

[newuser01]

bitcoin payment complete

Today was a good day and I gave out a 10% bonus to GRS miners. So each MH/s was 1100 GRS instead of 1000 GRS. Enjoy!

PS: Tomorrow's GRS per MHS value is 1050, GRS support level: 210 Satoshi.

so first 20% off then 10% added to that.. so you only skimmed 12% off the top today?

nice going

[srcxxx]

bitcoin payment complete

Today was a good day and I gave out a 10% bonus to GRS miners. So each MH/s was 1100 GRS instead of 1000 GRS. Enjoy!

PS: Tomorrow's GRS per MHS value is 1050, GRS support level: 210 Satoshi.

so first 20% off then 10% added to that.. so you only skimmed 12% off the top today?

nice going

Whatever. I will leave this post of yours here, so that you don't blame me that I'm deleting them.

But please note that I want to keep your useless comments to the minimum here.

[srcxxx]

I have recompiled the kernels with some different parameters and I'm getting about 15% more hashrate on my AMD R9 290. Used to be 930KH/s, not it is 1065KH/s.

You might want to try and see if this works for you.

I'm also going to compile on 13.12 and 14.7 drivers and opst here.

Please, as always, share your results. Config and hashrate. I'm especially interested in 6950, 7950, 7970 and R9 280X speeds / configs.

There is a 3,000 GRS bounty for sharing your results, just see OP.

Try downloading updated "sm" kernels and copying over your existing .bin files. You probably will get 10% - 15% more hashrate. The file is compressed with 7zip.

PS: Your power usage will also increase probably.

[murders10]

I have recompiled the kernels with some different parameters and I'm getting about 15% more hashrate on my AMD R9 290. Used to be 930KH/s, not it is 1065KH/s.

You might want to try and see if this works for you.

I'm also going to compile on 13.12 and 14.7 drivers and opst here.

Please, as always, share your results. Config and hashrate. I'm especially interested in 6950, 7950, 7970 and R9 280X speeds / configs.

There is a 3,000 GRS bounty for sharing your results, just see OP.

Try downloading updated "sm" kernels and copying over your existing .bin files. You probably will get 10% - 15% more hashrate. The file is compressed with 7zip.

PS: Your power usage will also increase probably.

will give it a try 

[murders10]

I have recompiled the kernels with some different parameters and I'm getting about 15% more hashrate on my AMD R9 290. Used to be 930KH/s, not it is 1065KH/s.

You might want to try and see if this works for you.

I'm also going to compile on 13.12 and 14.7 drivers and opst here.

Please, as always, share your results. Config and hashrate. I'm especially interested in 6950, 7950, 7970 and R9 280X speeds / configs.

There is a 3,000 GRS bounty for sharing your results, just see OP.

Try downloading updated "sm" kernels and copying over your existing .bin files. You probably will get 10% - 15% more hashrate. The file is compressed with 7zip.

PS: Your power usage will also increase probably.

will give it a try  

Confirmed 10% Hashrate But more heat from 58 to 61, Sapphire Toxic R9 280x

Thank You

[srcxxx]

Confirmed 10% Hashrate But more heat from 58 to 61, Sapphire Toxic R9 280x

Hi!

What's your hashrate now? About 800 KHS?

[murders10]

Confirmed 10% Hashrate But more heat from 58 to 61, Sapphire Toxic R9 280x

Hi!

What's your hashrate now? About 800 KHS?

No 755 my 280x had Elpida memory thats why it's slower 

[srcxxx]

Confirmed 10% Hashrate But more heat from 58 to 61, Sapphire Toxic R9 280x

Hi!

What's your hashrate now? About 800 KHS?

No 755 my 280x had Elpida memory thats why it's slower 

Actually, I believe that memory is not important here.
The kernel does not use memory at all.

Memory is needed in Scrypt mining.

Could you share you config?

Perhaps you need to reduce memory frequency to say 1000 or even lower (R9 290 allows 150 Mhz) and that should in turn allow you to have more GPU frequency while stating in the same thermal range.

[murders10]

Confirmed 10% Hashrate But more heat from 58 to 61, Sapphire Toxic R9 280x

Hi!

What's your hashrate now? About 800 KHS?

No 755 my 280x had Elpida memory thats why it's slower 

Actually, I believe that memory is not important here.
The kernel does not use memory at all.

Memory is needed in Scrypt mining.

Could you share you config?

Perhaps you need to reduce memory frequency to say 1000 or even lower (R9 290 allows 150 Mhz) and that should in turn allow you to have more GPU frequency while stating in the same thermal range.

Yeah i got that it's already 1000 i can't make it lower then that if i do it will go to default for some reason O.o 1600 here is my config

sgminer.exe -o stratum+tcp://boostpool.com:3333 -u FW4aUXMMmCkwa1VYk7SowZMEvSMKyWbriu -p Email@gmail.com --gpu-engine 1100 --gpu-memclock 1000 --intensity 19 --gpu-threads 1  --worksize 256 --gpu-powertune 20

BTW i'm under voltage to 1.150 from 1.250 if i tried 1150 drive will just crash i'm sure it's the under voltage. btw lowering Memory will lower heat i already tested before the last kernel 

[srcxxx]

Your intensity is 19. I'd recommend trying a higher value, perhaps 20 or 21.

Other settings seem ok.

Thanks

[murders10]

Your intensity is 19. I'd recommend trying a higher value, perhaps 20 or 21.

Other settings seem ok.

Thanks

Yeah higher Intensity get me more hash 20 around 785 so 21 should be it

U welcome and thank you waiting on my first payment BTW mining blind sucks for new miner's i know u promised to fix the Statistics soon so please do for the sake of new miners like me 

[istvandv]

confirmed 10% increase hashrate

before: 363 kh/s
with new sm kernel: 399 kh/s

GPU: 7850 1GB RAM
OS: Ubuntu 12.04
driver: 14.6

[srcxxx]

Today's payout: GRS / BTC

I will do realtime statistics by Monday.

"Pay Per Speed" price for tomorrow is 1025 GRS per MHS per day.

GRS support level: 220 Satoshi

[srcxxx]

confirmed 10% increase hashrate

before: 363 kh/s
with new sm kernel: 399 kh/s

GPU: 7850 1GB RAM
OS: Ubuntu 12.04
driver: 14.6

Thanks for sharing!

Please send (in the thread or personal message) your full config and your GRS address and I'll send 3000 GRS.

Same for other miners, if you share your config and hashrate, I'll send you 3000 GRS. Thanks!!!

[Allexx]

before: 600 kh/s
with new sm kernel: 675 kh/s

GPU: GIGABYTE Radeon HD 7950 GV-R795WF3-3GD (rev1.0)
OS: Windows 7
driver: 14.4

sgminer.exe -o stratum+tcp://boostpool.com:3333 -u FWGzrSTY8YXZkifPrmidjinNVUMyCBu7pk -p ***@gmail.com --gpu-engine 1085 --gpu-memclock 350 --intensity 22 --gpu-threads 1 --worksize 256 --gpu-powertune 20

[booz]

Я тaк пoнял пo pyccки тyт пoнимaют.
Чтo бyдeт ecли иcпoльзoвaть oбычный 5й cгминep?

[istvandv]

confirmed 10% increase hashrate

before: 363 kh/s
with new sm kernel: 399 kh/s

GPU: 7850 1GB RAM
OS: Ubuntu 12.04
driver: 14.6

Thanks for sharing!

Please send (in the thread or personal message) your full config and your GRS address and I'll send 3000 GRS.

Same for other miners, if you share your config and hashrate, I'll send you 3000 GRS. Thanks!!!

"gpu-engine" : "1150",
"gpu-memclock" : "1000",
"intensity" : "20",
"gpu-threads" : "1",
"worksize" : "256",
"gpu-powertune" : "0"

ill pm you my GRS address, thank you in advance

[srcxxx]

Я тaк пoнял пo pyccки тyт пoнимaют.
Чтo бyдeт ecли иcпoльзoвaть oбычный 5й cгминep?

You cannot use sgminer 5 on this pool.
This pool is only for grs-sgminer.

[katak]

Hello,

I undervolt @ 0.956V:

"gpu-threads" : "1",
"gpu-engine" : "1090",
"intensity" : "21",
"temp-target" : "72",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"worksize" : "256" 

I got 688 KH/s and now 768 KH/s on my 280x.

Same for the 7950, it increased around 9%.

You already got my GRS adress but in case: Fqbau6iV6sJPqmPw1k1JjzaDPjYx22RRxP



Thx