Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 08, 2014, 11:05:10 AM Last edit: June 19, 2017, 04:39:46 PM by Claymore |
|
Claymore Cryptonite (XCN) GPU Miner ========================= Current version 2.3:- Devfee is set to 0% since this miner is not supported for a long time. Link:https://mega.co.nz/#F!PxJXBD5T!zj1GJ7zkmvqfo3yd2mis-QMirror:https://drive.google.com/folderview?id=0B69wv2iqszefT2JUYmpqN09yWnM&usp=sharingThis is POOL version. There are two versions: for Catalyst 13.12 and for 14.7. Version for Catalyst 14.7 is faster by about 10%. CURRENT LIMITATION: Only "1gh.com" and "nonce-pool.com" pools are supported. Set "GPU_MAX_ALLOC_PERCENT" environment variable as "100". Developer fee is set to 0% in v2.3 since this miner is not supported for a long time. This version is for recent AMD videocards only: 6xxx, 7xxx and 2xx. No nVidia support. This version is for Windows x64 only. No Windows x32 support. No Linux support. This version has no GPU temperature and overclocking management. COMMAND LINE OPTIONS: -o pool address and port. -u your wallet address. -p password, use "x" as password. -di GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs. -dbg debug log and messages. "-dbg 0" - create log file but don't show debug messages. "-dbg 1" - create log file and show debug messages. "-dbg -1" (default) - no log file and no debug messages. SAMPLE USAGE NsGpuXCNMiner.exe -o stratum+tcp://xcnpool.1gh.com:7333 -u CbQCrFD85s8hjKztoUJm51AnZV1iyDBpBa -p x Do not forget to specify your wallet address! PERFORMANCE About 9.0 Mh/s on stock 290X for Catalyst 14.7 version. TROUBLESHOOTING 1. Install Catalyst v13.12 or 14.7 and use appropriate miner version. 2. Disable overclocking. 3. Set GPU_MAX_ALLOC_PERCENT 100. 4. Reboot computer.
|
|
|
|
|
|
|
|
|
The Bitcoin network protocol was designed to be extremely flexible. It can be used to create timed transactions, escrow transactions, multi-signature transactions, etc. The current features of the client only hint at what will be possible in the future.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
opossum
|
|
September 08, 2014, 11:35:26 AM |
|
Very nice! Catalyst 14 version coming soon?
Sadly this does not work on my catalyst 14.
|
▄▄█████████▄▄ ▄█████████████████▄ ▄████▀ ▀████▄ █████ █████▄ ██████████████▄█████████████▄ ████▀▀▀▀▀▀▀█████████▀▀▀▀▀▀▀███▄ ████ ███████ ████ ████ ███████ ████ ████ ███████ ████ ████ ███████ ████ ████▄ ███████ ▄████ ▀████ ███████ ▄████▀ ▀████▄▄▄███████▄▄▄████▀ ▀▀███████████████▀▀
| TIDEX | ║ █ ║ | | ║ █ ║ | |
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 08, 2014, 11:41:25 AM |
|
v14.x drivers have some new bug in OpenCL compiler, it will take some time to investigate this issue and find a workaround, probably 1-2 days.
|
|
|
|
opossum
|
|
September 08, 2014, 11:43:07 AM |
|
v14.x drivers have some new bug in OpenCL compiler, it will take some time to investigate this issue and find a workaround, probably 1-2 days.
No problem, I'll wait.
|
▄▄█████████▄▄ ▄█████████████████▄ ▄████▀ ▀████▄ █████ █████▄ ██████████████▄█████████████▄ ████▀▀▀▀▀▀▀█████████▀▀▀▀▀▀▀███▄ ████ ███████ ████ ████ ███████ ████ ████ ███████ ████ ████ ███████ ████ ████▄ ███████ ▄████ ▀████ ███████ ▄████▀ ▀████▄▄▄███████▄▄▄████▀ ▀▀███████████████▀▀
| TIDEX | ║ █ ║ | | ║ █ ║ | |
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
September 08, 2014, 11:56:40 AM |
|
6.2MH/s on 290x wow that's bad... compared to nvidia equivalent 780ti doing 14MH/s (that's mostly the same perf as the 750ti for 4x the power usage...) I was thinking to switch back my 660 with my 290x, well for less than 2MH/s it isn't worth it.
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 08, 2014, 12:03:18 PM |
|
6.2MH/s on 290x wow that's bad... compared to nvidia equivalent 780ti doing 14MH/s I was thinking to switch back my 660 with my 290x, well for less than 2MH/s it isn't worth it. 780ti is a bit more expensive and powerful card But I agree, in general nvidia is faster for this algo. At least for now.
|
|
|
|
jwinterm
Legendary
Offline
Activity: 3010
Merit: 1103
|
|
September 08, 2014, 12:19:16 PM |
|
Why no support for linux for any Claymore miner? Is it just because binaries are more easily/effectively obfuscated for windows? You guys just love bill gates? Hate linus? Just curious.
|
|
|
|
Jungian
Legendary
Offline
Activity: 930
Merit: 1010
|
|
September 08, 2014, 12:22:03 PM |
|
"WARNING: Linking two modules of different data layouts! WARNING: Linking two modules of different target tripes: 'amdil-pc-amdopencl'"
What does this mean?
I use 13.12
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 08, 2014, 12:27:28 PM |
|
Why no support for linux for any Claymore miner? Is it just because binaries are more easily/effectively obfuscated for windows? You guys just love bill gates? Hate linus? Just curious.
I really don't like Linux Almost any action there takes much more time than in Windows and I don't like to spend a lot of time for nothing. Simple action - install Catalyst 13.12 on Ubuntu 14.04. As I found, it's impossible, spent half a day for nothing. And so on... However, I will release Linux CryptoNote miner very soon.
|
|
|
|
hoze
Member
Offline
Activity: 92
Merit: 10
|
|
September 08, 2014, 12:28:13 PM |
|
"WARNING: Linking two modules of different data layouts! WARNING: Linking two modules of different target tripes: 'amdil-pc-amdopencl'"
What does this mean?
I use 13.12
I have the same problem with AMD 270x and AMD 280x too!
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 08, 2014, 12:30:40 PM Last edit: September 08, 2014, 01:13:56 PM by Claymore |
|
"WARNING: Linking two modules of different data layouts! WARNING: Linking two modules of different target tripes: 'amdil-pc-amdopencl'"
What does this mean?
I use 13.12
My mistake, my dev system has custom OpenCL settings, I will reload binaries in a few minutes. PS. It will take some more time because I found how to avoid problem with Catalyst 14.x and also improve miner speed.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 08, 2014, 01:54:09 PM |
|
Updated, v1.1 beta:
- Improved mining speed, about 8 MH/s on stock 290x. - Fixed issue with OpenCL warnings.
Unfortunately, issue with Catalyst 14.x will take some more time.
|
|
|
|
Jungian
Legendary
Offline
Activity: 930
Merit: 1010
|
|
September 08, 2014, 02:15:24 PM |
|
Updated, v1.1 beta:
- Improved mining speed, about 8 MH/s on stock 290x. - Fixed issue with OpenCL warnings.
Unfortunately, issue with Catalyst 14.x will take some more time.
Works for me now. Even with Catalyst 14 by copy/paste I'm guessing this will release mean 1gh will have way more than 50% of the network.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 08, 2014, 02:41:39 PM |
|
Updated, v1.1 beta:
- Improved mining speed, about 8 MH/s on stock 290x. - Fixed issue with OpenCL warnings.
Unfortunately, issue with Catalyst 14.x will take some more time.
Works for me now. Even with Catalyst 14 by copy/paste I'm guessing this will release mean 1gh will have way more than 50% of the network. It already has >50%, just check the list of latest found blocks.
|
|
|
|
hoze
Member
Offline
Activity: 92
Merit: 10
|
|
September 08, 2014, 02:54:34 PM |
|
my first results with version 1.1 :
Sapphire r9 270x 3350 KH/sec Sapphire r9 278x 5750 KH/sec
|
|
|
|
adaseb
Legendary
Offline
Activity: 3738
Merit: 1708
|
|
September 08, 2014, 03:13:47 PM |
|
Getting 2 errors
MSVCP100.dll is missing Can't initialize mpir.dll
|
|
|
|
adaseb
Legendary
Offline
Activity: 3738
Merit: 1708
|
|
September 08, 2014, 03:27:38 PM |
|
GOt it working
3600khash for 270x (1100/1500)
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 08, 2014, 03:33:48 PM |
|
I used mpir to debug code on CPU, now I removed mpir.dll dependency, redownload v1.1.
|
|
|
|
himmelsfaller2
Newbie
Offline
Activity: 49
Merit: 0
|
|
September 08, 2014, 04:19:11 PM |
|
anyone has kh/s for 7970 GHZ edition and power usage. I've 4 sapphire 7970 vapor x, but so far I went with gtx 750 ti, because they need much less power but if the 7970 goes to 7000 kh/s it may be worth it.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3738
Merit: 1708
|
|
September 08, 2014, 09:19:12 PM |
|
At the moment the BTC/hash is not profitable. Almost like X11 returns.
Coin really needs to get higher from 800 satoshis
|
|
|
|
|