Claymore's Cryptonite (XCN) GPU Miner v2.3

[MisO69]

I am considering upgrading my Windows 8.1 rigs to 14.7 driver. I have 6 GPUs on each rig. Has anyone successful done this and got all 6 gpus working?

I'm currently running the stock microsoft drivers and they are the only way I was able to get all 6 gpus to work. With any AMD drivers I only get 5 gpus active.

[OrientA]

I am considering upgrading my Windows 8.1 rigs to 14.7 driver. I have 6 GPUs on each rig. Has anyone successful done this and got all 6 gpus working?

I'm currently running the stock microsoft drivers and they are the only way I was able to get all 6 gpus to work. With any AMD drivers I only get 5 gpus active.

You can search the forum for lbr 6 GPU mod.

[xtrembash]

is it possible to have 2.5% fee, boost hasrate and support [XMG] Magi ?
it ll be great
thanks in advance

br

[Claymore]

is it possible to have 2.5% fee, boost hasrate and support [XMG] Magi ?
it ll be great
thanks in advance

br

1. As always, I'm ready to reduce dev fee if someone who is not too lazy creates a good AMD miner to make some competition.
2. XMG requires some efforts, I will do it when I have time, right now I'm really busy with other miners.

[Terwa]

Is there a howto to install on pimp? (getpimp.org)

[atp1916]

I am considering upgrading my Windows 8.1 rigs to 14.7 driver. I have 6 GPUs on each rig. Has anyone successful done this and got all 6 gpus working?

I'm currently running the stock microsoft drivers and they are the only way I was able to get all 6 gpus to work. With any AMD drivers I only get 5 gpus active.

https://bitcointalk.org/index.php?topic=712228

Also, in that thread: https://bitcointalk.org/index.php?topic=712228.msg8983788#msg8983788

[binhpx]

Hi Claymore
Your miner did not run with my rig (6 cards HD 7950 - 14.7 RC3 driver).I ran debug and it's showing below,please help

C:\batcoin\XCN>NsGpuXCNMiner.exe -o stratum+tcp://xcnpool.1gh.com:7333 -u CRBpyT
sTAtDcCtgQDFgMsV2djLkiS9Mvd9 -p x -dbg 1
Main pool is xcnpool.1gh.com

╔════════════════════════════════════════════════════════════════╗
║               Claymore XCN GPU Miner  v2.1 Beta                ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 6
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
GPU #4: name: Tahiti, 3072 MB available, 28 units
GPU #5: name: Tahiti, 3072 MB available, 28 units
Total cards: 6

Catalyst 14.7 is REQUIRED for best performance and compatibility
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing, please wait...

0 m = 2
1 m = 2
2 m = 2
3 m = 2
4 m = 2
5 m = 2
POOL version

[Claymore]

Hi Claymore
Your miner did not run with my rig (6 cards HD 7950 - 14.7 RC3 driver).I ran debug and it's showing below,please help

C:\batcoin\XCN>NsGpuXCNMiner.exe -o stratum+tcp://xcnpool.1gh.com:7333 -u CRBpyT
sTAtDcCtgQDFgMsV2djLkiS9Mvd9 -p x -dbg 1
Main pool is xcnpool.1gh.com

╔════════════════════════════════════════════════════════════════╗
║               Claymore XCN GPU Miner  v2.1 Beta                ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 6
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
GPU #4: name: Tahiti, 3072 MB available, 28 units
GPU #5: name: Tahiti, 3072 MB available, 28 units
Total cards: 6

Catalyst 14.7 is REQUIRED for best performance and compatibility
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing, please wait...

0 m = 2
1 m = 2
2 m = 2
3 m = 2
4 m = 2
5 m = 2
POOL version

How long did you wait?
https://bitcointalk.org/index.php?topic=774601.msg8877670#msg8877670

[go6ooo1212]

@Claymore
Hi there , I'have a new problem with miner which worked perfectly sometime before , with same settings on same platform and same rig with the same drivers 14.7 rc3:

here's my conf file:

Code:

 NsGpuXCNMiner.exe -o stratum+tcp://xcnpool.1gh.com:7333 -u CGwxV3MuLZgj3yk5nwbu7LyHJwMnNE1Wzk -p x -dbg 0
pause

the result is that:



Here is the log file:

Code:

21:02:58:488	ea0	
21:02:58:488	ea0	ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
21:02:58:488	ea0	є               Claymore XCN GPU Miner  v2.1 Beta                є
21:02:58:488	ea0	ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
21:03:00:692	ea0	
Cards available: 5 
21:03:00:692	ea0	GPU #0: name: Tahiti, 3072 MB available, 32 units 
21:03:00:692	ea0	GPU #1: name: Tahiti, 3072 MB available, 32 units 
21:03:00:692	ea0	GPU #2: name: Tahiti, 3072 MB available, 32 units 
21:03:00:692	ea0	GPU #3: name: Tahiti, 3072 MB available, 32 units 
21:03:00:692	ea0	GPU #4: name: Tahiti, 3072 MB available, 32 units 
21:03:00:692	ea0	Total cards: 5 
21:03:00:692	ea0	Initializing, please wait...

21:03:00:723	ea0	card 0, m1 3072, m2 2815 w 256
21:03:00:723	ea0	0 m = 2
21:03:00:754	ea0	card 1, m1 3072, m2 2815 w 256
21:03:00:754	ea0	1 m = 2
21:03:00:817	ea0	card 2, m1 3072, m2 2815 w 256
21:03:00:817	ea0	2 m = 2
21:03:00:832	ea0	card 3, m1 3072, m2 2815 w 256
21:03:00:832	ea0	3 m = 2
21:03:00:863	ea0	card 4, m1 3072, m2 2815 w 256
21:03:00:863	ea0	4 m = 2
21:03:00:879	ea0	POOL version
21:03:00:879	ea0	b105

Any ideas what could I've changed ?

[Claymore]

@Claymore
Hi there , I'have a new problem with miner which worked perfectly sometime before , with same settings on same platform and same rig with the same drivers 14.7 rc3:
Any ideas what could I've changed ?

Previous page
https://bitcointalk.org/index.php?topic=774601.msg9000371#msg9000371

[go6ooo1212]

@Claymore
Hi there , I'have a new problem with miner which worked perfectly sometime before , with same settings on same platform and same rig with the same drivers 14.7 rc3:
Any ideas what could I've changed ?

Previous page
https://bitcointalk.org/index.php?topic=774601.msg9000371#msg9000371

Thanks now its OK. Do yoy have plan to squeeze more haspower from AMD ?

[binhpx]

Hi Claymore
Your miner did not run with my rig (6 cards HD 7950 - 14.7 RC3 driver).I ran debug and it's showing below,please help

C:\batcoin\XCN>NsGpuXCNMiner.exe -o stratum+tcp://xcnpool.1gh.com:7333 -u CRBpyT
sTAtDcCtgQDFgMsV2djLkiS9Mvd9 -p x -dbg 1
Main pool is xcnpool.1gh.com

╔════════════════════════════════════════════════════════════════╗
║               Claymore XCN GPU Miner  v2.1 Beta                ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 6
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
GPU #4: name: Tahiti, 3072 MB available, 28 units
GPU #5: name: Tahiti, 3072 MB available, 28 units
Total cards: 6

Catalyst 14.7 is REQUIRED for best performance and compatibility
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing, please wait...

0 m = 2
1 m = 2
2 m = 2
3 m = 2
4 m = 2
5 m = 2
POOL version

How long did you wait?
https://bitcointalk.org/index.php?topic=774601.msg8877670#msg8877670

Claymore,it's running now,thank you for help.It took almost 5 minutes for the preparation

[Claymore]

@Claymore
Hi there , I'have a new problem with miner which worked perfectly sometime before , with same settings on same platform and same rig with the same drivers 14.7 rc3:
Any ideas what could I've changed ?

Previous page
https://bitcointalk.org/index.php?topic=774601.msg9000371#msg9000371

Thanks now its OK. Do yoy have plan to squeeze more haspower from AMD ?

Yes I will improve hashrate when I have enough time for that.

[Terwa]

Is there a howto to install on pimp? (getpimp.org)

Somebody??
Thanks.

[jwinterm]

Is there a howto to install on pimp? (getpimp.org)

Somebody??
Thanks.

Read the OP dude: 

This version is for Windows x64 only. No Windows x32 support. No Linux support.

Maybe you could install vmware in PiMP and then figure out how to pass your gpus through to virtual machine...or just pirate win7

[digicoin]

Any plan to support AMD driver 14.9 or 14.11

[Claymore]

Any plan to support AMD driver 14.9 or 14.11

No. All latest drivers are slower in OpenCL.

[drr0ss]

Claymore Cryptonite (XCN) GPU Miner
=========================

Current version 2.1:

C:\xcn>setx GPU_MAX_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

C:\xcn>setx GPU_FORCE_64BIT_PTR 0

SUCCESS: Specified value was saved.

C:\xcn>NsGpuXCNMiner -di 0,1 -o stratum+tcp://mine1.xcn.nonce-pool.com:4035 -u any -p any -dbg 1
Main pool is mine1.xcn.nonce-pool.com

╔════════════════════════════════════════════════════════════════╗
║               Claymore XCN GPU Miner  v2.1 Beta                ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 2
GPU #0: name: Tahiti, 3072 MB available, 32 units
GPU #1: name: Tahiti, 3072 MB available, 32 units
Total cards: 2

Catalyst 14.7 is REQUIRED for best performance and compatibility
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing, please wait...

0 m = 2
1 m = 2
POOL version
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different data layouts!
^CTerminate batch job (Y/N)?

#dbg=1================

06:49:39:461   50   
06:49:39:461   50   ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
06:49:39:461   50   є               Claymore XCN GPU Miner  v2.1 Beta                є
06:49:39:461   50   ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
06:49:40:461   50   
Cards available: 2
06:49:40:461   50   GPU #0: name: Tahiti, 3072 MB available, 32 units
06:49:40:461   50   GPU #1: name: Tahiti, 3072 MB available, 32 units
06:49:40:461   50   Total cards: 2
06:49:40:461   50   Initializing, please wait...

06:49:40:541   50   card 0, m1 3072, m2 2815 w 256
06:49:40:541   50   0 m = 2
06:49:40:581   50   card 1, m1 3072, m2 2815 w 256
06:49:40:581   50   1 m = 2
06:49:40:581   50   POOL version
06:49:40:581   50   b105

driver 14.9, win 8.1 64bit
Your linker version is 11.0, perhaps vs 2012, could you try to compile with vs 2013 ?

edit:
anyway, I revert drivers to 14.7 version, so they work now, the issue that some code files were built with old version of the compiler.

[squeezerule]

Does this miner support mining XMG ?

[go6ooo1212]

Does this miner support mining XMG ?

nope...