[ANN][DNC][GPU/CPU]DarkNetCoin-NOPREMINED-NO IPO-True anonymity

[marklin]

How to solo~~！
 

[nrg_wolf]

ok i have approx 30,000 KHS but because of the consistent disconnects on the miner, both gpu and cpu miners the pool barley shows 12mhs.... Dev can you please investigate this consistent and annoying disconnection issue. this is what keeps happening approx every 30-45 seconds. sometimes faster then that.



[2014-10-14 22:22:31.556] Re-login, disconnecting...
[2014-10-14 22:22:31.556] Re-connect... and relogin...
[2014-10-14 22:22:31.556] thread 1: 786432 hashes, 3765.52 kh/s
[2014-10-14 22:22:31.556] submit_upstream_work stratum_send_line failed
[2014-10-14 22:22:31.556] ...retry after 10 seconds
[2014-10-14 22:22:31.556] thread 0: 262144 hashes, 3807.96 kh/s
[2014-10-14 22:22:41.762] Stratum authentication failed
[2014-10-14 22:22:41.762] Failed...retry after 10 seconds
[2014-10-14 22:22:51.767] Stratum connection timed out
[2014-10-14 22:22:51.767] Stratum connection interrupted

[marklin]

ok i have approx 30,000 KHS but because of the consistent disconnects on the miner, both gpu and cpu miners the pool barley shows 12mhs.... Dev can you please investigate this consistent and annoying disconnection issue. this is what keeps happening approx every 30-45 seconds. sometimes faster then that.



[2014-10-14 22:22:31.556] Re-login, disconnecting...
[2014-10-14 22:22:31.556] Re-connect... and relogin...
[2014-10-14 22:22:31.556] thread 1: 786432 hashes, 3765.52 kh/s
[2014-10-14 22:22:31.556] submit_upstream_work stratum_send_line failed
[2014-10-14 22:22:31.556] ...retry after 10 seconds
[2014-10-14 22:22:31.556] thread 0: 262144 hashes, 3807.96 kh/s
[2014-10-14 22:22:41.762] Stratum authentication failed
[2014-10-14 22:22:41.762] Failed...retry after 10 seconds
[2014-10-14 22:22:51.767] Stratum connection timed out
[2014-10-14 22:22:51.767] Stratum connection interrupted

yes！dev！pls

[darknetspace]

Dev, i have launched many cryptonote coin like dosh dash bbr etc etc
strange ... Over the block 2050 pool not comfirm the rest of blocks but my wallet is unlocked and i look coins mined.
i have tested pool with v0.99.2 and universal but not accept stratum when i test.
what node you use for mining and backend?
Node modules is ok , wildkeccak present
Ps: miners dont worry coins are in the wallet

https://github.com/CryptoCoinLabs/node-cryptonote-pool

Forked from https://github.com/clintar/node-cryptonote-pool

[darknetspace]

ok i have approx 30,000 KHS but because of the consistent disconnects on the miner, both gpu and cpu miners the pool barley shows 12mhs.... Dev can you please investigate this consistent and annoying disconnection issue. this is what keeps happening approx every 30-45 seconds. sometimes faster then that.



[2014-10-14 22:22:31.556] Re-login, disconnecting...
[2014-10-14 22:22:31.556] Re-connect... and relogin...
[2014-10-14 22:22:31.556] thread 1: 786432 hashes, 3765.52 kh/s
[2014-10-14 22:22:31.556] submit_upstream_work stratum_send_line failed
[2014-10-14 22:22:31.556] ...retry after 10 seconds
[2014-10-14 22:22:31.556] thread 0: 262144 hashes, 3807.96 kh/s
[2014-10-14 22:22:41.762] Stratum authentication failed
[2014-10-14 22:22:41.762] Failed...retry after 10 seconds
[2014-10-14 22:22:51.767] Stratum connection timed out
[2014-10-14 22:22:51.767] Stratum connection interrupted

yes！dev！pls

Sorry to hear that, however, we encountered the same matter.

Maybe you can: 

(1) delete the scratchpad.bin file

(2) modify the minerd_gpu.bat file to minerd connects to the port 7777 port instead of port 5555 as following:

      minerd.exe -a wildkeccak_ocl -o stratum+tcp://66.175.220.129:7777

We hope this will help you a bit.

[nrg_wolf]

ok i have approx 30,000 KHS but because of the consistent disconnects on the miner, both gpu and cpu miners the pool barley shows 12mhs.... Dev can you please investigate this consistent and annoying disconnection issue. this is what keeps happening approx every 30-45 seconds. sometimes faster then that.



[2014-10-14 22:22:31.556] Re-login, disconnecting...
[2014-10-14 22:22:31.556] Re-connect... and relogin...
[2014-10-14 22:22:31.556] thread 1: 786432 hashes, 3765.52 kh/s
[2014-10-14 22:22:31.556] submit_upstream_work stratum_send_line failed
[2014-10-14 22:22:31.556] ...retry after 10 seconds
[2014-10-14 22:22:31.556] thread 0: 262144 hashes, 3807.96 kh/s
[2014-10-14 22:22:41.762] Stratum authentication failed
[2014-10-14 22:22:41.762] Failed...retry after 10 seconds
[2014-10-14 22:22:51.767] Stratum connection timed out
[2014-10-14 22:22:51.767] Stratum connection interrupted

yes！dev！pls

Sorry to hear that, however, we encountered the same matter.

Maybe you can: 

(1) delete the scratchpad.bin file

(2) modify the minerd_gpu.bat file to minerd connects to the port 7777 port instead of port 5555 as following:

      minerd.exe -a wildkeccak_ocl -o stratum+tcp://66.175.220.129:7777

We hope this will help you a bit.

doing that makes no difference, it still happens within seconds across all my miners. i believe BBR had a similar issue. i might suggest to have a look there and see how they slowed it down or if they found a way to resolve it.

[darknetspace]

ok i have approx 30,000 KHS but because of the consistent disconnects on the miner, both gpu and cpu miners the pool barley shows 12mhs.... Dev can you please investigate this consistent and annoying disconnection issue. this is what keeps happening approx every 30-45 seconds. sometimes faster then that.



[2014-10-14 22:22:31.556] Re-login, disconnecting...
[2014-10-14 22:22:31.556] Re-connect... and relogin...
[2014-10-14 22:22:31.556] thread 1: 786432 hashes, 3765.52 kh/s
[2014-10-14 22:22:31.556] submit_upstream_work stratum_send_line failed
[2014-10-14 22:22:31.556] ...retry after 10 seconds
[2014-10-14 22:22:31.556] thread 0: 262144 hashes, 3807.96 kh/s
[2014-10-14 22:22:41.762] Stratum authentication failed
[2014-10-14 22:22:41.762] Failed...retry after 10 seconds
[2014-10-14 22:22:51.767] Stratum connection timed out
[2014-10-14 22:22:51.767] Stratum connection interrupted

yes！dev！pls

Sorry to hear that, however, we encountered the same matter.

Maybe you can: 

(1) delete the scratchpad.bin file

(2) modify the minerd_gpu.bat file to minerd connects to the port 7777 port instead of port 5555 as following:

      minerd.exe -a wildkeccak_ocl -o stratum+tcp://66.175.220.129:7777

We hope this will help you a bit.

doing that makes no difference, it still happens within seconds across all my miners. i believe BBR had a similar issue. i might suggest to have a look there and see how they slowed it down or if they found a way to resolve it.

Ok, maybe you are right, let us check this issue.

[darknetspace]

whats with the consistant disconnect and relogin every 30 odd seconds on the miner..... iam at http://66.175.220.129/.....

We encountered this matter too, however, we have no idea about this till now.

If someone knows, then tell us please, we will offer 10,000 DNC as a bounty.

[antonio8]

@ darknetcoin dev

Can you give a little info on setting up the non gui wallet since it isn't available?

I just need to know what to save the "mywallet" file type as to create it.  I already have the blockchain downloaded and saved.

The help section from the pool that is linked only shows how to set up the gui wallet, which isn't available yet.

[darknetspace]

@ darknetcoin dev

Can you give a little info on setting up the non gui wallet since it isn't available?

I just need to know what to save the "mywallet" file type as to create it.  I already have the blockchain downloaded and saved.

The help section from the pool that is linked only shows how to set up the gui wallet, which isn't available yet.

http://www.darknetspace.org/how-to/

You can search the key word "How To Use CLI Daemon".

Then you will find there are materials about how to use daemon and wallet.

[lobo13hf]

Dev why didnt you wait till everything was running as it suppose why launch it without GUI wallet no blockcain, not trying to trash the coin, cuz the coin looks good new algo! but this all fuck up man been for like couple hours try to mine and get the wallet and nothing  no support at all

Code:

You need to make a wallet file.

run the wallet program with args 'simplewallet

WTF is this arg not everybory is a nerd man ...

[BanditryAndLoot]

Dev why didnt you wait till everything was running as it suppose why launch it without GUI wallet no blockcain, not trying to trash the coin, cuz the coin looks good new algo! but this all fuck up man been for like couple hours try to mine and get the wallet and nothing  no support at all

Code:

You need to make a wallet file.

run the wallet program with args 'simplewallet

WTF is this arg not everybory is a nerd man ...

i can't run simplewallet, daemon is running.

You need to make a wallet file.

run the wallet program with args 'simplewallet --generate-new-wallet test --password test'

and then run it again with args 'simplewallet --wallet-file test --password test'

You can make the name/pw whatever you want.

[antonio8]

@ darknetcoin dev

Can you give a little info on setting up the non gui wallet since it isn't available?

I just need to know what to save the "mywallet" file type as to create it.  I already have the blockchain downloaded and saved.

The help section from the pool that is linked only shows how to set up the gui wallet, which isn't available yet.

http://www.darknetspace.org/how-to/

You can search the key word "How To Use CLI Daemon".

Then you will find there are materials about how to use daemon and wallet.

Great, so you create a coin where we have to make our own wallet to use.

That tutatorial is useless for me.

I try making it in the command prompt and get 'simplewallet' is not recognized as an internal or external command, operable or batch file.

Can you tell me without going to someone else's site, because the instructions there is clear to me on where to type that command, how to get going on inputting the info to start?

[smic]

thanks dev, i test

[Amph]

isn't wild keccak something related to cryptonight algo?

[darknetspace]

@ darknetcoin dev

Can you give a little info on setting up the non gui wallet since it isn't available?

I just need to know what to save the "mywallet" file type as to create it.  I already have the blockchain downloaded and saved.

The help section from the pool that is linked only shows how to set up the gui wallet, which isn't available yet.

http://www.darknetspace.org/how-to/

You can search the key word "How To Use CLI Daemon".

Then you will find there are materials about how to use daemon and wallet.

Great, so you create a coin where we have to make our own wallet to use.

That tutatorial is useless for me.

I try making it in the command prompt and get 'simplewallet' is not recognized as an internal or external command, operable or batch file.

Can you tell me without going to someone else's site, because the instructions there is clear to me on where to type that command, how to get going on inputting the info to start?

Sorry for the inconvenience, we will release GUI wallet as fast as possible.

After you open command console, you have to change directory to the one which simplewallet.exe is located.

For an example, if you extracted DarkNetSpace_Win32.zip to C:\DarkNetSpace, you may type " cd c:\DarkNetSpace" and Enter.

Now you come to the directory C:\DarkNetSpace, you may use the command about simplewallet, such as "simplewallet --generate-new-wallet mywallet.dat --password 12345"

Sorry for the inconvenience again.

[darknetspace]

isn't wild keccak something related to cryptonight algo?

Wild keccak is a new methods of proof of work.

[darknetspace]

dev , how to pool mining ? please , i can't on pool mining , gpu miner ,now only cpu miner on my computer mining ,E3 1230 V2 ,but solo , no coin

Download http://www.darknetspace.org/files/cpuminer-multi-opencl-x64.zip

Run minerd_cpu.bat to pool cpu mining, don't forget to change the miner address.

[z38630610]

dev, how to create a wallet address?
windows7 64 bit systems
Please help me, thank you!

please review the quick start page at  http://www.darknetspace.org/how-to/

gpu miner on pool display "getwork failed,retry after 10 seconds" along display ,please why

i try 1111 , 5555 ,8888 ,port ,also view …… retry after 10 secounds ,help me ,

[z38630610]

dev , how to pool mining ? please , i can't on pool mining , gpu miner ,now only cpu miner on my computer mining ,E3 1230 V2 ,but solo , no coin

Download http://www.darknetspace.org/files/cpuminer-multi-opencl-x64.zip

Run minerd_cpu.bat to pool cpu mining, don't forget to change the miner address.

now i can cpu mining on pool ,but can't gpu miner mining on pool  ,

dev your on pool mining picture into this web look at ?