antminer s3 shutdown and asic status

[coolpintud]

Hi all friends,

i buy new antminer s3+ but i didn't found how to shutdown miner proper way there is no any shutdown button on device as well as on control panel.

also i found my one miner show me "-" on Asic Status instead of "0". but second miner working fine.

i am using CX500 corsair

so how can i solve this problem as well as how can i shutdown device proper way.

bcoz i also tried "shutdown -h now" in ssh but its didn't working.

Thanks in advance for your help and support.

[1715343804]

1715343804

[1715343804]

1715343804

[1715343804]

1715343804

[HellDiverUK]

See the power switch on the PSU?  Yep, that's the one.  Flip it.  Device now shut down.

[coolpintud]

See the power switch on the PSU?  Yep, that's the one.  Flip it.  Device now shut down.

lol... i know that but i just wanted to confirm that its ok with direct switch off the power.

But thanks any way..

Any information about why we getting "-" on Asic status ?

[klondike_bar]

See the power switch on the PSU?  Yep, that's the one.  Flip it.  Device now shut down.

lol... i know that but i just wanted to confirm that its ok with direct switch off the power.

But thanks any way..

Any information about why we getting "-" on Asic status ?

flipping the power switch is fine.

usually if asics are showing as '-' or 'o' it means you should reboot. try a software reboot first, and if that doesnt work, a PSU reboot. It can also be caused if you push a cheap PSU near its limits and it provides sub-par 12V power (such as 11.8V at high load). You should use a 550W+ PSU to be sure, and check that it has 450W+ on the 12V rail

[coolpintud]

Thank you very much for grateful reply...