TRASH

[bitcoinkkk]

DoctorByte Logo contest has been initiated:

https://bitcointalk.org/index.php?topic=900007.00

Dev, if you have any changes to that OP, please let me know.

B  for btc logo  Modify  D.

https://twitter.com/bastboot/status/546149004871229441/photo/1

[bitcoinkkk]

can't sync! 

I replaced the bin file but does not work. I also added doctorbyted.exe --add-peer doctorbyted.ddnst.net but does not work!

Try it with doctorbyted.exe --add-peer dbpool.mooo.com
The ddns peer is down my ISP crashed. Now i have only 4G Internet on my Mobile. Don't know when DSL is available again

It does not work and closes instantly!   
same problem with doctorbyted.ddnst.net

Hmm, that should work try this:

doctorbyted.exe --add-peer 86.160.45.210
Or
doctorbyted.exe --add-peer 86.160.45.210:7878

Normal it work with Domain Name without Port.
If it still don't work :

Can anybody post the bin file ? I fell so bad that i can't help better wirhout Internet

PS: doctorbyted.ddns.net is OFFLINE I HAVE NO INTERNET, MY ISP CRASHED

Thanks!

Even this does not work. The bin file I downloaded from here: https://bitbucket.org/doctorbyte/doctorbyte/downloads/p2pstate.bin

I know, the file is to old.
Can anybody upload a new one anywhere ?
Sorry that i can help anymore.

Are you using two PC's ? One Is Windows 7 and the other ?

One PC, windows server 2008!

can't sync! 

I replaced the bin file but does not work. I also added doctorbyted.exe --add-peer doctorbyted.ddnst.net but does not work!

Try it with doctorbyted.exe --add-peer dbpool.mooo.com
The ddns peer is down my ISP crashed. Now i have only 4G Internet on my Mobile. Don't know when DSL is available again

It does not work and closes instantly!   
same problem with doctorbyted.ddnst.net

Hmm, that should work try this:

doctorbyted.exe --add-peer 86.160.45.210
Or
doctorbyted.exe --add-peer 86.160.45.210:7878

Normal it work with Domain Name without Port.
If it still don't work :

Can anybody post the bin file ? I fell so bad that i can't help better wirhout Internet

PS: doctorbyted.ddns.net is OFFLINE I HAVE NO INTERNET, MY ISP CRASHED

Thanks!

Even this does not work. The bin file I downloaded from here: https://bitbucket.org/doctorbyte/doctorbyte/downloads/p2pstate.bin

I know, the file is to old.
Can anybody upload a new one anywhere ?
Sorry that i can help anymore.

Are you using two PC's ? One Is Windows 7 and the other ?

One PC, windows server 2008!

Sorry but have you used the IP's, in the Screenshots i see only dbpool.mooo.com !!!

2014-Dec-20 16:36:31.866000 Starting...
2014-Dec-20 16:36:31.881600 doctorbyte v0.0.1(0.1-gec8b566)
2014-Dec-20 16:36:31.881600 Module folder: D:\bitbak\doctorbyte\doctorbyted.exe
2014-Dec-20 16:36:31.881600 Initializing p2p server...
2014-Dec-20 16:36:31.881600 Binding on 0.0.0.0:7878
2014-Dec-20 16:36:31.881600 Net service binded on 0.0.0.0:7878
2014-Dec-20 16:36:31.897200 Attempting to add IGD port mapping.
2014-Dec-20 16:36:32.958001 Added IGD port mapping.
2014-Dec-20 16:36:32.958001 P2p server initialized OK
2014-Dec-20 16:36:32.958001 Initializing cryptonote protocol...
2014-Dec-20 16:36:32.973602 Cryptonote protocol initialized OK
2014-Dec-20 16:36:32.973602 Initializing core rpc server...
2014-Dec-20 16:36:32.973602 Binding on 127.0.0.1:7879
2014-Dec-20 16:36:32.989202 Core rpc server initialized OK on port: 7879
2014-Dec-20 16:36:32.989202 Initializing core...
2014-Dec-20 16:36:33.004802 Loading blockchain...
2014-Dec-20 16:36:33.552103 Blockchain initialized. last block: 11555, d0.h5.m43
.s57 time ago, current difficulty: 128407
2014-Dec-20 16:36:33.552103 Core initialized OK
2014-Dec-20 16:36:33.567703 Starting core rpc server...
2014-Dec-20 16:36:33.567703 Run net_service loop( 2 threads)...
2014-Dec-20 16:36:33.583303 [SRV_MAIN]Core rpc server started ok
2014-Dec-20 16:36:33.583303 [SRV_MAIN]Starting p2p net loop...
2014-Dec-20 16:36:33.583303 [SRV_MAIN]Run net_service loop( 10 threads)...
2014-Dec-20 16:36:34.594306 [P2P6]
**********************************************************************
The daemon will start synchronizing with the network. It may take up to several
hours.

You can set the level of process detailization* through "set_log <level>" comman
d*, where <level> is between 0 (no details) and 4 (very verbose).

Use "help" command to see the list of available commands.

Note: in case you need to interrupt the process, use "exit" command. Otherwise,
the current progress won't be saved.
**********************************************************************
set_log 2
2014-Dec-20 16:36:49.626437 [P2P0][0.0.0.0:0 OUT]Connect failed to 83.59.161.34:
7878
2014-Dec-20 16:36:49.626437 [P2P0]Selected peer: 4857585807222976293 81.3.165.17
8:7878[white=1] last_seen: d3.h18.m17.s4
2014-Dec-20 16:36:49.642037 [P2P0]Connecting to 81.3.165.178:7878(white=1, last_
seen: d3.h18.m17.s4)...
2014-Dec-20 16:36:52.134443 [P2P0][0.0.0.0:0 OUT]Connect failed to 81.3.165.178:
7878
2014-Dec-20 16:36:52.150043 [P2P0]Selected peer: 17448240833766287820 81.164.5.2
00:7878[white=1] last_seen: d3.h15.m38.s42
2014-Dec-20 16:36:52.165643 [P2P0]Connecting to 81.164.5.200:7878(white=1, last_
seen: d3.h15.m38.s42)...
2014-Dec-20 16:36:57.185853 [P2P0][0.0.0.0:0 OUT]Connect failed to 81.164.5.200:
7878
2014-Dec-20 16:36:57.185853 [P2P0]Selected peer: 17448240833766287820 5.83.18.25
4:7878[white=1] last_seen: d4.h12.m56.s24
2014-Dec-20 16:36:57.201453 [P2P0]Connecting to 5.83.18.254:7878(white=1, last_s
een: d4.h12.m56.s24)...
2014-Dec-20 16:37:02.230962 [P2P0][0.0.0.0:0 OUT]Connect failed to 5.83.18.254:7
878
2014-Dec-20 16:37:02.230962 [P2P0]Selected peer: 17448240833766287820 89.12.67.8
7:7878[white=1] last_seen: d5.h3.m13.s48
2014-Dec-20 16:37:02.262162 [P2P0]Connecting to 86.160.45.210:7878(white=1, last_s
een: d5.h3.m13.s48)...
2014-Dec-20 16:37:07.266273 [P2P0][0.0.0.0:0 OUT]Connect failed to 86.160.45.210:7
878
2014-Dec-20 16:37:07.266273 [P2P0]Selected peer: 17448240833766287820 89.13.24.9
:7878[white=0] last_seen: d3.h21.m47.s14
2014-Dec-20 16:37:07.281873 [P2P0]Connecting to 89.13.24.9:7878(white=0, last_se
en: d3.h21.m47.s14)...



2014-Dec-20 16:37:02.262162 [P2P0]Connecting to 86.160.45.210:7878(white=1, last_s
een: d5.h3.m13.s48)...
2014-Dec-20 16:37:07.266273 [P2P0][0.0.0.0:0 OUT]Connect failed to 86.160.45.210:7
878

no syn

[doctorbyte]

can't sync! 

I replaced the bin file but does not work. I also added doctorbyted.exe --add-peer doctorbyted.ddnst.net but does not work!

Try it with doctorbyted.exe --add-peer dbpool.mooo.com
The ddns peer is down my ISP crashed. Now i have only 4G Internet on my Mobile. Don't know when DSL is available again

It does not work and closes instantly!   
same problem with doctorbyted.ddnst.net

Hmm, that should work try this:

doctorbyted.exe --add-peer 86.160.45.210
Or
doctorbyted.exe --add-peer 86.160.45.210:7878

Normal it work with Domain Name without Port.
If it still don't work :

Can anybody post the bin file ? I fell so bad that i can't help better wirhout Internet

PS: doctorbyted.ddns.net is OFFLINE I HAVE NO INTERNET, MY ISP CRASHED

Thanks!

Even this does not work. The bin file I downloaded from here: https://bitbucket.org/doctorbyte/doctorbyte/downloads/p2pstate.bin

I know, the file is to old.
Can anybody upload a new one anywhere ?
Sorry that i can help anymore.

Are you using two PC's ? One Is Windows 7 and the other ?

One PC, windows server 2008!

can't sync! 

I replaced the bin file but does not work. I also added doctorbyted.exe --add-peer doctorbyted.ddnst.net but does not work!

Try it with doctorbyted.exe --add-peer dbpool.mooo.com
The ddns peer is down my ISP crashed. Now i have only 4G Internet on my Mobile. Don't know when DSL is available again

It does not work and closes instantly!   
same problem with doctorbyted.ddnst.net

Hmm, that should work try this:

doctorbyted.exe --add-peer 86.160.45.210
Or
doctorbyted.exe --add-peer 86.160.45.210:7878

Normal it work with Domain Name without Port.
If it still don't work :

Can anybody post the bin file ? I fell so bad that i can't help better wirhout Internet

PS: doctorbyted.ddns.net is OFFLINE I HAVE NO INTERNET, MY ISP CRASHED

Thanks!

Even this does not work. The bin file I downloaded from here: https://bitbucket.org/doctorbyte/doctorbyte/downloads/p2pstate.bin

I know, the file is to old.
Can anybody upload a new one anywhere ?
Sorry that i can help anymore.

Are you using two PC's ? One Is Windows 7 and the other ?

One PC, windows server 2008!

Sorry but have you used the IP's, in the Screenshots i see only dbpool.mooo.com !!!

2014-Dec-20 16:36:31.866000 Starting...
2014-Dec-20 16:36:31.881600 doctorbyte v0.0.1(0.1-gec8b566)
2014-Dec-20 16:36:31.881600 Module folder: D:\bitbak\doctorbyte\doctorbyted.exe
2014-Dec-20 16:36:31.881600 Initializing p2p server...
2014-Dec-20 16:36:31.881600 Binding on 0.0.0.0:7878
2014-Dec-20 16:36:31.881600 Net service binded on 0.0.0.0:7878
2014-Dec-20 16:36:31.897200 Attempting to add IGD port mapping.
2014-Dec-20 16:36:32.958001 Added IGD port mapping.
2014-Dec-20 16:36:32.958001 P2p server initialized OK
2014-Dec-20 16:36:32.958001 Initializing cryptonote protocol...
2014-Dec-20 16:36:32.973602 Cryptonote protocol initialized OK
2014-Dec-20 16:36:32.973602 Initializing core rpc server...
2014-Dec-20 16:36:32.973602 Binding on 127.0.0.1:7879
2014-Dec-20 16:36:32.989202 Core rpc server initialized OK on port: 7879
2014-Dec-20 16:36:32.989202 Initializing core...
2014-Dec-20 16:36:33.004802 Loading blockchain...
2014-Dec-20 16:36:33.552103 Blockchain initialized. last block: 11555, d0.h5.m43
.s57 time ago, current difficulty: 128407
2014-Dec-20 16:36:33.552103 Core initialized OK
2014-Dec-20 16:36:33.567703 Starting core rpc server...
2014-Dec-20 16:36:33.567703 Run net_service loop( 2 threads)...
2014-Dec-20 16:36:33.583303 [SRV_MAIN]Core rpc server started ok
2014-Dec-20 16:36:33.583303 [SRV_MAIN]Starting p2p net loop...
2014-Dec-20 16:36:33.583303 [SRV_MAIN]Run net_service loop( 10 threads)...
2014-Dec-20 16:36:34.594306 [P2P6]
**********************************************************************
The daemon will start synchronizing with the network. It may take up to several
hours.

You can set the level of process detailization* through "set_log <level>" comman
d*, where <level> is between 0 (no details) and 4 (very verbose).

Use "help" command to see the list of available commands.

Note: in case you need to interrupt the process, use "exit" command. Otherwise,
the current progress won't be saved.
**********************************************************************
set_log 2
2014-Dec-20 16:36:49.626437 [P2P0][0.0.0.0:0 OUT]Connect failed to 83.59.161.34:
7878
2014-Dec-20 16:36:49.626437 [P2P0]Selected peer: 4857585807222976293 81.3.165.17
8:7878[white=1] last_seen: d3.h18.m17.s4
2014-Dec-20 16:36:49.642037 [P2P0]Connecting to 81.3.165.178:7878(white=1, last_
seen: d3.h18.m17.s4)...
2014-Dec-20 16:36:52.134443 [P2P0][0.0.0.0:0 OUT]Connect failed to 81.3.165.178:
7878
2014-Dec-20 16:36:52.150043 [P2P0]Selected peer: 17448240833766287820 81.164.5.2
00:7878[white=1] last_seen: d3.h15.m38.s42
2014-Dec-20 16:36:52.165643 [P2P0]Connecting to 81.164.5.200:7878(white=1, last_
seen: d3.h15.m38.s42)...
2014-Dec-20 16:36:57.185853 [P2P0][0.0.0.0:0 OUT]Connect failed to 81.164.5.200:
7878
2014-Dec-20 16:36:57.185853 [P2P0]Selected peer: 17448240833766287820 5.83.18.25
4:7878[white=1] last_seen: d4.h12.m56.s24
2014-Dec-20 16:36:57.201453 [P2P0]Connecting to 5.83.18.254:7878(white=1, last_s
een: d4.h12.m56.s24)...
2014-Dec-20 16:37:02.230962 [P2P0][0.0.0.0:0 OUT]Connect failed to 5.83.18.254:7
878
2014-Dec-20 16:37:02.230962 [P2P0]Selected peer: 17448240833766287820 89.12.67.8
7:7878[white=1] last_seen: d5.h3.m13.s48
2014-Dec-20 16:37:02.262162 [P2P0]Connecting to 86.160.45.210:7878(white=1, last_s
een: d5.h3.m13.s48)...
2014-Dec-20 16:37:07.266273 [P2P0][0.0.0.0:0 OUT]Connect failed to 86.160.45.210:7
878
2014-Dec-20 16:37:07.266273 [P2P0]Selected peer: 17448240833766287820 89.13.24.9
:7878[white=0] last_seen: d3.h21.m47.s14
2014-Dec-20 16:37:07.281873 [P2P0]Connecting to 89.13.24.9:7878(white=0, last_se
en: d3.h21.m47.s14)...



2014-Dec-20 16:37:02.262162 [P2P0]Connecting to 86.160.45.210:7878(white=1, last_s
een: d5.h3.m13.s48)...
2014-Dec-20 16:37:07.266273 [P2P0][0.0.0.0:0 OUT]Connect failed to 86.160.45.210:7
878

no syn

I am going to ask dbpool to what IP's he is synced. I would add them to the HardCoded Nodes/Peers.

I would try to upload the Files with my mobile

[MoneroMooo]

I've just opened 7878 on my firewall, it was closed.
Restarting the daemon now, it seems to be redownloading chain, not sure what's going on... But you should be able to connect to it soon.

It's connected to 176.57.143.70 at the moment, the only peer.

Edit: daemon running again, should be reachable now on dbpool.mooo.com:7878. The pool seems to be moaning about blocks higher than the chain height which is a bit worrying. Hopefully will sort itself out
I'll be keeping an eye here in case there are still issues syncing.

[chris190]

I tried several times, then I added the various nodes, I waited a lot and now it works! 

doctorbyted.exe --add-peer 86.160.45.210:7878 83.59.161.34:7878 81.3.165.178:7878 81.164.5.200:7878 5.83.18.254:7878 89.12.67.87:7878 89.13.24.9:7878 86.160.45.210:7878 176.57.143.70:7878 dbpool.mooo.com

[MoneroMooo]

So the pool seems to have not liked the restart/resync and thinks it's found 9 different blocks for height 12774
I hope it won't break when they mature.

Anyway, could you point me to the code where Doctorbyte uses more stealth addresses ? I looked, but did not find anything.

[doctorbyte]

So the pool seems to have not liked the restart/resync and thinks it's found 9 different blocks for height 12774
I hope it won't break when they mature.

Anyway, could you point me to the code where Doctorbyte uses more stealth addresses ? I looked, but did not find anything.

HOW TO CONNECT UNTIL NEW WALLET

Code:

doctorbyted.exe --add-peer 86.160.45.210:7878 83.59.161.34:7878 81.3.165.178:7878 81.164.5.200:7878 5.83.18.254:7878 89.12.67.87:7878 89.13.24.9:7878 86.160.45.210:7878 176.57.143.70:7878 dbpool.mooo.com

NEW WALLET SCREENSHOOT / UPLOAD IN FEW DAYS AFTER BUG FIXES

[/i]

[bitcoinkkk]

So the pool seems to have not liked the restart/resync and thinks it's found 9 different blocks for height 12774
I hope it won't break when they mature.

Anyway, could you point me to the code where Doctorbyte uses more stealth addresses ? I looked, but did not find anything.

PLACE HOLDER FOR ANN

HOW TO CONNECT UNTIL NEW WALLET

Code:

doctorbyted.exe --add-peer 86.160.45.210:7878 83.59.161.34:7878 81.3.165.178:7878 81.164.5.200:7878 5.83.18.254:7878 89.12.67.87:7878 89.13.24.9:7878 86.160.45.210:7878 176.57.143.70:7878 dbpool.mooo.com

NEW WALLET SCREENSHOOT / UPLOAD IN FEW DAYS AFTER BUG FIXES

hi dev 
Total coins: (25Million OLD) NOW 18Million         
 1， What do you mean  （ old  or  now ）？   now,have old and now wallet？
 2， Block Explorers？                                 
 3，This project plans to talk about it？

[doctorbyte]

So the pool seems to have not liked the restart/resync and thinks it's found 9 different blocks for height 12774
I hope it won't break when they mature.

Anyway, could you point me to the code where Doctorbyte uses more stealth addresses ? I looked, but did not find anything.

PLACE HOLDER FOR ANN

HOW TO CONNECT UNTIL NEW WALLET

Code:

doctorbyted.exe --add-peer 86.160.45.210:7878 83.59.161.34:7878 81.3.165.178:7878 81.164.5.200:7878 5.83.18.254:7878 89.12.67.87:7878 89.13.24.9:7878 86.160.45.210:7878 176.57.143.70:7878 dbpool.mooo.com

NEW WALLET SCREENSHOOT / UPLOAD IN FEW DAYS AFTER BUG FIXES

hi dev  
Total coins: (25Million OLD) NOW 18Million          
 1， What do you mean  （ old  or  now ）？   now,have old and now wallet？
 2， Block Explorers？                                
 3，This project plans to talk about it？

1. We have a new Source Code in few days (maby today), with the new Source it's not possible to have 25Million Coins because we would have Genenis Error and all Block needed to be reset (Back to Block 1). We work to fix this, but until that we have 18 Million Coins
2. We wait for a reply
3. What you mean

[doctorbyte]

DOCTORBYTE V0.1.1 HARD UPGRADE

YOU NEED TO UPGRADE

WINDOWS https://bitbucket.org/doctorbyte/doctorbyte/downloads/Release_WIN64.zip

EDIT :SOURCE CODE git clone https://doctorbyte@bitbucket.org/doctorbyte/doctorbyte.git

EDIT 2: WE HAVE FOR 3 DAYS (UNTIL 24th) A HIGHER TRANSACTION FEE, ON THE 24th I UPLOAD NEW WINDOWS FILES AND CHANGE THE SOURCE. THAT IS MY CHRISTMAS GIFT  

[doctorbyte]

So the pool seems to have not liked the restart/resync and thinks it's found 9 different blocks for height 12774
I hope it won't break when they mature.

Anyway, could you point me to the code where Doctorbyte uses more stealth addresses ? I looked, but did not find anything.

Cryptonote use 100 stealth addresses Doctorbyte 500 per Ring, we work also on 4 Rings : Ring 1 2 3 and Big
Cryptonote has only Ring 1 2 and Big

Just search ring in the explorer

[bitcoinkkk]

DOCTORBYTE V0.1.1 HARD UPGRADE

YOU NEED TO UPGRADE

WINDOWS https://bitbucket.org/doctorbyte/doctorbyte/downloads/Release_WIN64.zip

EDIT :SOURCE CODE git clone https://doctorbyte@bitbucket.org/doctorbyte/doctorbyte.git

EDIT 2: WE HAVE FOR 3 DAYS (UNTIL 24th) A HIGHER TRANSACTION FEE, ON THE 24th I UPLOAD NEW WINDOWS FILES AND CHANGE THE SOURCE. THAT IS MY CHRISTMAS GIFT  

Look forward to。

[bitcoinkkk]

DOCTORBYTE V0.1.1 HARD UPGRADE

YOU NEED TO UPGRADE

WINDOWS https://bitbucket.org/doctorbyte/doctorbyte/downloads/Release_WIN64.zip

EDIT :SOURCE CODE git clone https://doctorbyte@bitbucket.org/doctorbyte/doctorbyte.git

EDIT 2: WE HAVE FOR 3 DAYS (UNTIL 24th) A HIGHER TRANSACTION FEE, ON THE 24th I UPLOAD NEW WINDOWS FILES AND CHANGE THE SOURCE. THAT IS MY CHRISTMAS GIFT 

Look forward to。

Download and Install

Windows

https://bitbucket.org/doctorbyte/doctorbyte/downloads/Release_WIN64FIX.zip

Release_WIN64FIX.zip     And before any different?      （Release_WIN64.zip  and  Release_WIN64FIX.zip  any different?)

[doctorbyte]

DOCTORBYTE V0.1.1 HARD UPGRADE

YOU NEED TO UPGRADE

WINDOWS https://bitbucket.org/doctorbyte/doctorbyte/downloads/Release_WIN64.zip

EDIT :SOURCE CODE git clone https://doctorbyte@bitbucket.org/doctorbyte/doctorbyte.git

EDIT 2: WE HAVE FOR 3 DAYS (UNTIL 24th) A HIGHER TRANSACTION FEE, ON THE 24th I UPLOAD NEW WINDOWS FILES AND CHANGE THE SOURCE. THAT IS MY CHRISTMAS GIFT 

Look forward to。

Download and Install

Windows

https://bitbucket.org/doctorbyte/doctorbyte/downloads/Release_WIN64FIX.zip

Release_WIN64FIX.zip     And before any different?      （Release_WIN64.zip  and  Release_WIN64FIX.zip  any different?)

Yes, see Added a Checkpoint //Thanks to MoneroMooo ; Fixed the fix; Prepared the Christmas Gift in BitBucket

[Agestorzrxx]

 Doctor Who coin, what a great idea.

[doctorbyte]

Doctor Who coin, what a great idea.

Thank you very much

IF ANYBODY HAS ANYTIME NO CONNECTION, USE THIS :

Code:

doctorbyte.exe --add-peer 176.57.143.70:7878

Code:

./doctorbyte --add-peer 176.57.143.70:7878

[MoneroMooo]

Sorry, my daemon crashed overnight. It's back up now.

I'll be updating to the latest code this morning. I'll bump the fees by half a percent to cater for the increased tx fee. I'll also decrease the expected time to share as I think the current setup makes for large variations in payout distribution as some blocks are solved so fast that only one miner gets to submit a share for it.

[doctorbyte]

Sorry, my daemon crashed overnight. It's back up now.

I'll be updating to the latest code this morning. I'll bump the fees by half a percent to cater for the increased tx fee. I'll also decrease the expected time to share as I think the current setup makes for large variations in payout distribution as some blocks are solved so fast that only one miner gets to submit a share for it.

Thank you very much, now only 2 day until the much much lower new Fee.

WE NEED YOUR HELP. TELL YOUR FRIENDS ABOUT DOCTORBYTE, WE NEED A HIGHER HASHRATE. WE WANT TO STAY UNTIL THE END OF THE UNIVERSE, HIGH,GREAT AND SUCCESSFULL

[chris190]

Some exchange in the future?

[doctorbyte]

Some exchange in the future?

We asked some and waiting for a reply, but i thing that it's also to early.