[ANN][UTIL] UtilityCoin - x13 POS - New Developer

[ruleland]

UTILITYCOIN


ABOUT








DEVELOPMENT






WALLETS



v0.1.1.2


   

before upgrading/downgrading your wallet always create a backup first!




EXCHANGE










BLOCK EXPLORER

[1715591519]

1715591519

[1715591519]

1715591519

[ruleland]

UtilityCoin update 2014-12-21


As the previous thread seems to be abandoned by the original poster, I have created this new moderated thread, where I will try to keep you updated of developments as much as possible.

Also I really recommend joining the blocknet slack through http://goo.gl/forms/UkViMl2fKn, as it is just so much easier communicating

I have been diving into the UtilityCoin code that was available on BitBucket, and started to implement a node system that was proposed in the original ANN.
However, I haven't finished it yet. But due to the pending delisting on Bittrex, I still wanted to share with all of you, that progress is still being made, albeit by a another developer, and hopefully get enough volume to stay listed.

Current development on the node system can be seen at https://github.com/ruleland/utilitycoin, and it should be ready for testing soon.

The system allows for a wallet to start as either a control node, a service node or a normal node.

The control node can have several service node entries that are linked to different wallet addresses with a transaction of exactly 2500 UTIL. With such a transaction in the wallet, a service node can be started.

The service node is supposed to service the network. Possible features would be anonimization of funds, function as a VPN node or any other network function you can think of.

The normal node will be updated so it can actually use the service nodes to execute network functions.

The main focus for now, is to get the initial node system working. This will be very similar to the DarkCoin masternode system developed by Evan Duffield, as I am using his code as an example.

I will update the new ANN soon with some more information as soon as I have the node system finished and have some time.

A new domain has been registered with a temporary site that can be found at http://utilitycoin.info


UtilityCoin update 2015-01-11

[go6ooo1212]

More details, launch-time , etc.
EDIT: @OCminer, Glad to see you around , waiting for kondiomir too

[ocminer]

More details, launch-time , etc.
EDIT: @OCminer, Glad to see you around , waiting for kondiomir too

Good to see you too, but this is a self moderated topic and the OP starter is already deleting posts.. lets see where this brings us...

[ruleland]

More details, launch-time , etc.
EDIT: @OCminer, Glad to see you around , waiting for kondiomir too

this coin is already launched but has been abandonded by the previous orginal poster. I will be taking on development

[ruleland]

More details, launch-time , etc.
EDIT: @OCminer, Glad to see you around , waiting for kondiomir too

Good to see you too, but this is a self moderated topic and the OP starter is already deleting posts.. lets see where this brings us...

yes, I will delete every non related, non contributing and FUD posts.

well worded constructive criticism is always welcome though

[xxxgoodgirls]

Oh man! UTIL's back!
Btw who are you? I guess miker00lz is not involved anymore. Is Dan Metcalf taking part of the development?
GL sir!

[ruleland]

Oh man! UTIL's back!
Btw who are you? I guess miker00lz is not involved anymore. Is Dan Metcalf taking part of the development?
GL sir!

no miker00lz isn't involved anymore (if you mean utilitycoin), I have tried contacting him on here, but had no replies, so I am assuming he has abandoned it.

As for me I'm just a developer who is invested in UTIL and one that wanted to get involved into development of a crypto currency for a while.

Dan Metcalf is still working on the VPN-HTTP-PROXY, but I believe he is also very busy with Blocknet and XC, so I'm not expecting anything soon.

[jdebunt]

Looking forward to what you can do with the node system.


New UTIL article.

[friendfromnobody]

thank you ,ruleland  

[ruleland]

thanks for all the support. and for all the buying and selling. volume is doing well.

[ruleland]

thought it might be a good idea to check if the displayed coin supply was valid with the following code:

Code:

std::string Test()
{
    printf("Checking total coin supply");

    int height = 1;
    int64_t value = 0;
    int64_t fee = 0;

    for (height; height < nBestHeight; height++)
    {
        CBlockIndex* pblockindex = FindBlockByHeight(height);

        CBlock block;
        block.ReadFromDisk(pblockindex, true);

        BOOST_FOREACH(CTransaction& tx, block.vtx)
        {
            if (tx.IsCoinBase())
            {
                // generated POW
                BOOST_FOREACH(CTxOut txOut, tx.vout)
                    value += txOut.nValue;
            }
            else
            {
                int64_t valueIn = 0;
                int64_t valueOut = 0;

                BOOST_FOREACH(CTxIn txIn, tx.vin)
                {
                    CTransaction txPrev;

                    txPrev.ReadFromDisk(txIn.prevout);

                    CTxOut txOut = txPrev.vout[txIn.prevout.n];

                    valueIn += txOut.nValue;
                }

                BOOST_FOREACH(CTxOut txOut, tx.vout)
                    valueOut += txOut.nValue;

                if (valueOut < valueIn)
                    fee += valueIn - valueOut;
                else
                    value += valueOut - valueIn;
            }
        }
    }

    float fvalue = value / (float) COIN;
    float ffee = fee / (float) COIN;

    std::string result;

    result += (boost::format("blocks scanned: %1%\n") % height).str();
    result += (boost::format("total supply: %11.8f\n") % fvalue).str();
    result += (boost::format("total fee: %11.8f\n") % ffee).str();

    return result;
}

output:

blocks scanned: 105658
total supply: 3711873.00000000
total fee: 43.62789917

everything seems to be in order, the calculated total supply matches the total supply displayed in the block.

[blackbird307]

I don't care whether you think this is FUD or not... You can delete this if you want, I don't care honestly.

I know I have been reacting negatively before, because I remember when a dev took over an altcoin before, I believe it was flappycoin. Alot was done to improve the coin, better wallet, games, and even an online wallet. These were things nobody has heard of before. It didn't effect the price, even though alot was done. And now I am reflecting back on that.

I am glad someone took up the project. Hopefully it goes somewhere, I don't care since Ive already been burned by this by Pr0m and his team, I am not ready to be burned again.

Sorry.

[ruleland]

I don't care whether you think this is FUD or not... You can delete this if you want, I don't care honestly.

I know I have been reacting negatively before, because I remember when a dev took over an altcoin before, I believe it was flappycoin. Alot was done to improve the coin, better wallet, games, and even an online wallet. These were things nobody has heard of before. It didn't effect the price, even though alot was done. And now I am reflecting back on that.

I am glad someone took up the project. Hopefully it goes somewhere, I don't care since Ive already been burned by this by Pr0m and his team, I am not ready to be burned again.

Sorry.

I very much get the sentiment. The alt coin community have been scammed left and right, and so have I. And I get it, new development doesn't necessarily mean a price increase. I'm very aware of that. I'm not doing this for price alone. Although it would be great if the price rises as I have a stake in it myself, I'm much more interested in the technology itself. Understanding it and eventually contribute to it.

As I said before and I mean that: Good luck in your next endeavors.

[Splatters]

Thanks god! I bought some @8k and some @2k so I really hope to see my investment well spent and this coin up again.

[ruleland]

UtilityCoin update 2015-01-11 (Node system testnet)

The updated wallet with the node system code is test ready, if you would like to help out testing, download any of the following wallets
TESTNET ONLY (or at your own risk on mainnet)

before doing anything else, create a backup of your mainnet wallet and store it at a secure location

utilitycoin-linux-0.2.1.2.tar.gz
utilitycoin-win-0.2.1.3.zip

When your wallet is downloaded, start by setting up a Control Node

Control node (Part 1)

In your UtilityCoin.conf add the following parameters

Code:

server=1
daemon=1
port=port number of choice
rpcport=port number of choice
rpcuser=long random text
rpcpassword=long random text
testnet=1
irc=0
logtimestamps=1
controlnode=1
addnode=104.207.139.164:39998
addnode=104.156.251.225:39998

make sure you use:
testnet=1
controlnode=1

start the control node, and let it sync. After syncing, create an address you want to receive some tUTIL, and pm me the address either on bitcointalk or on slack (I have already mined the testnet).

run the command "generatesharedkey" either in the console or through the daemon. copy the generated key to a texteditor. Create as many keys as service nodes you want to run.

Service node
now run another wallet, either locally or on a remote location (remote location is advised) and in your UtilityCoin.conf add the following parameters

Code:

server=1
daemon=1
rpcuser=long random text
rpcpassword=long random text
port=39998
listen=1
irc=0
testnet=1
logtimestamps=1
servicenode=1
sharedkey=generated shared key generated earlier in the control node wallet
addnode=104.207.139.164:39998
addnode=104.156.251.225:39998

make sure you use:
testnet=1
servicenode=1

Control node (Part 2)

after receiving the tUTIL, create as many addresses as service nodes you want to run.
send a transaction of exactly 2500 tUTIL to each address.

In your UtilityCoin.conf add the following parameters

Code:

addslavenode=alias1;wallet address 1;generated shared key 1;ip:39998;
addslavenode=alias2;wallet address 2;generated shared key 2;ip:39998;
.
.
.
addslavenode=aliasN;wallet address N;generated shared key N;ip:39998;

(wallet address entered here will be locked and excluded from staking)

after this you are all set, and you can start the control node

run the command "listservicenodes"  either in the console or through the daemon.

this should list all the nodes you added in the UtilityCoin.conf with addslavenode. If nothing is listed something is wrong in the conf file.

then run "startservicenodes" and check if every node has started

when running "listservicenodes" again you can check if the node is started or still processing (it can take 5 minutes before the node is registered as started).

UtilityCoin update 2015-01-12

[ruleland]

UtilityCoin update 2015-01-12 (Node system testnet)

Updated wallet (0.2.1.3)

TESTNET ONLY (or at your own risk on mainnet)

before doing anything else, create a backup of your mainnet wallet and store it at a secure location

utilitycoin-linux-0.2.1.3.tar.gz
utilitycoin-win-0.2.1.3.zip

- fixed a bug where the service node did not register at the control node
- fixed history keeping of sent and received messages
- update the splash image

(note: these wallets list version 2.0.1.3 on getinfo, this is because of the wallet expecting a higher version than the previous 2.0.0.0. However I want to have a bit more sane version, showing that this is still in beta development, and shouldn't have a major version higher than 0. This will be fixed in future wallets as well)


Added mainnet wallets to the OP

[ruleland]

UtilityCoin update 2015-01-13 (Node system testnet)

OSX wallet (0.2.1.3)

TESTNET ONLY (or at your own risk on mainnet)

before doing anything else, create a backup of your mainnet wallet and store it at a secure location

utilitycoin-linux-0.2.1.3.tar.gz
utilitycoin-win-0.2.1.3.zip
utilitycoin-osx-0.2.1.3.dmg


- fancy install doesn't have a background yet, and positioning needs fixing. but the wallet can install and run

(note: these wallets list version 2.0.1.3 on getinfo, this is because of the wallet expecting a higher version than the previous 2.0.0.0. However I want to have a bit more sane version, showing that this is still in beta development, and shouldn't have a major version higher than 0. This will be fixed in future wallets as well)

[ruleland]

UtilityCoin update 2015-01-18 (Security update)

before doing anything else, create a backup of your mainnet wallet and store it at a secure location

these are updated main net releases, fixing a vulnerability that has affected other coins as well (decreasing the drift window from 24 hours to 10 minutes), and contains a (temporary) checkpoint server.

(be aware that your datetime settings need to be correct to succesfully stake and not create orphans)

utilitycoin-linux-0.1.1.2.tar.gz
utilitycoin-win-0.1.1.2.zip

(note: these wallets list version 1.0.1.2 on getinfo, this is because of the wallet expecting a higher version than the previous 1.0.0.0. However I want to have a bit more sane version, showing that this is still in beta development, and shouldn't have a major version higher than 0. This will be fixed in future wallets as well)

I will be dedicating some of my time first to research POS 2.0 and the vulnerability that affected APEX.

[xxxgoodgirls]

Glad to see active development. Keep it up!

[rahmad2nd]

any new's ?

[Hamuki]

Does your coin need a multipool?

Getting a multipool for your coin will create buy pressure on exchanges.
And it will allow people with mining power to get more coins for their hashrate.

If you are interested, then take a look here: https://bitcointalk.org/index.php?topic=932225.0

Have a nice day!

[ruleland]

any new's ?

at the moment I'm swamped at my day job and haven't had much time to work on the coin. Deadline ends tomorrow so I will be working on it in the evenings next week.

[MasterCATZ]

non Mod would be better ... but thanks

I didn't even bother selling mine was such a loss

I bought like over 10 BTC worth and when I last looked .5 BTC value

[Splatters]

What about Util, is still alive or not?

[ruleland]

What about Util, is still alive or not?

It is still being worked on.

[Splatters]

is there a new dev or what?

[irbbq]

is there a new dev or what?

For those not in blocknet slack - Utilitycoin


We got a great new dev (Ruleland) who is genuinely interested in developing for the sake of innovation.

Dan has been working on the vpn/proxy tech and said a couple of days ago he is currently building the wallet.


With the time that has passed and pr0m3theus gone, it looks more like a long-term project now than the PnD scheme it looked like before.

Time will tell if the price will reflect the work being done.

[Ayzar]

Where's the latest wallet for this coin? Not connecting to network

[ruleland]

Where's the latest wallet for this coin? Not connecting to network

add the following to your UtilityCoin.conf

addnode=104.207.139.164
addnode=104.156.251.225

and restart

[kryptologist]

Thanks for reviving this coin. If you need any help just let me know.

[Edkemper]

save it from the grave!! Hope to see it back over 8k with a good develop behind

[TrackCoin]

Utilities very important for any kinds of stabilise business...

[racer2012]

Any updates
Where this coin headed?

[mv1986]

No words in a long time

[infinitechaos]

From Blocknet Slack:

atcsecure [8:40 AM]
download for new wallet

atcsecure [8:40 AM]
http://builds.xcurrency.co:8888/UtilityCoin/build/

atcsecure [8:40 AM]
this is just a test wallet w/ the vpn/http/proxy


atcsecure [9:48 AM]
I will setup a node on testnet for testing this within the hour or so


atcsecure [10:05 AM]
The latest wallet can be used on mainnet for http vpn, we can start some pr after more user testing

[pub111]

Where's the latest wallet for this coin? Not connecting to network

add the following to your UtilityCoin.conf

addnode=104.207.139.164
addnode=104.156.251.225

and restart

I can't manage to get the wallet synced.
Are there new nodes?

[ruleland]

I can't manage to get the wallet synced.
Are there new nodes?

one node dropped of because of a VPS restart, the other one should work. Which version are you using?

[pub111]

I can't manage to get the wallet synced.
Are there new nodes?

one node dropped of because of a VPS restart, the other one should work. Which version are you using?

From about Utilitycoin menu i can read: v1.0.1.2: Experimental
Anyway it's the wallet downloaded from the first page of this thread, windows version.

In this case should i use connect= or addnode= ?

[ruleland]

From about Utilitycoin menu i can read: v1.0.1.2: Experimental
Anyway it's the wallet downloaded from the first page of this thread, windows version.

In this case should i use connect= or addnode= ?

I suggest to use addnode.

Connect will only connect to the specified node, Addnode will add the node to the internal list of nodes and will allow the wallet to connect to other nodes.

[Epimetheus]

Is this delisted from Bittrex?

[pub111]

From about Utilitycoin menu i can read: v1.0.1.2: Experimental
Anyway it's the wallet downloaded from the first page of this thread, windows version.

In this case should i use connect= or addnode= ?

I suggest to use addnode.

Connect will only connect to the specified node, Addnode will add the node to the internal list of nodes and will allow the wallet to connect to other nodes.

Ok, i put the alive node in the first row of UtilityCoin.conf using addnode=, but it's till stuck on "Downloaded 34581 of 293661 blocks" ...

[pub111]

From about Utilitycoin menu i can read: v1.0.1.2: Experimental
Anyway it's the wallet downloaded from the first page of this thread, windows version.

In this case should i use connect= or addnode= ?

I suggest to use addnode.

Connect will only connect to the specified node, Addnode will add the node to the internal list of nodes and will allow the wallet to connect to other nodes.

Ok, i put the alive node in the first row of UtilityCoin.conf using addnode=, but it's till stuck on "Downloaded 34581 of 293661 blocks" ...

Started once again to download the blockchain...
17 active connection to UtilityCoin network but still stuck at block 34581...
somebody got any clue?

[friendfromnobody]

i have no problems with my wallet,

and its only at cryptsy now but it will come back at bittrex.

[friendfromnobody]

From about Utilitycoin menu i can read: v1.0.1.2: Experimental
Anyway it's the wallet downloaded from the first page of this thread, windows version.

In this case should i use connect= or addnode= ?

I suggest to use addnode.

Connect will only connect to the specified node, Addnode will add the node to the internal list of nodes and will allow the wallet to connect to other nodes.

Ok, i put the alive node in the first row of UtilityCoin.conf using addnode=, but it's till stuck on "Downloaded 34581 of 293661 blocks" ...

Started once again to download the blockchain...
17 active connection to UtilityCoin network but still stuck at block 34581...
somebody got any clue?

do you use this wallet?

https://mega.co.nz/#!D1UTwBAR!m0zxIuvnRDcDHGOXUtlHyWJVVMCB69O26NJnYH1WId4

[MiningMinion]

From about Utilitycoin menu i can read: v1.0.1.2: Experimental
Anyway it's the wallet downloaded from the first page of this thread, windows version.

In this case should i use connect= or addnode= ?

I suggest to use addnode.

Connect will only connect to the specified node, Addnode will add the node to the internal list of nodes and will allow the wallet to connect to other nodes.

Ruleland, which version is the latest one and where do we download it from? Also which conf file do we use?  The v0.1.1.2 does not sync.

Thanks

[friendfromnobody]

From about Utilitycoin menu i can read: v1.0.1.2: Experimental
Anyway it's the wallet downloaded from the first page of this thread, windows version.

In this case should i use connect= or addnode= ?

I suggest to use addnode.

Connect will only connect to the specified node, Addnode will add the node to the internal list of nodes and will allow the wallet to connect to other nodes.

Ruleland, which version is the latest one and where do we download it from? Also which conf file do we use?  The v0.1.1.2 does not sync.

Thanks

download it from the first page old util thread

https://bitcointalk.org/index.php?topic=797900.msg8975343#msg8975343

[synechist]

Ethereum is becoming Blocknet-enabled!


http://cointelegraph.com/news/114228/blocknet-adding-ethereum-to-suite-of-supported-currencies

[synechist]

We're getting started with a Util brainstorming session in the Blocknet's Think Tank.

Join in!

https://slack-files.com/T02PXPVUF-F04B1UYS8-509f9298f7

[pub111]

From about Utilitycoin menu i can read: v1.0.1.2: Experimental
Anyway it's the wallet downloaded from the first page of this thread, windows version.

In this case should i use connect= or addnode= ?

I suggest to use addnode.

Connect will only connect to the specified node, Addnode will add the node to the internal list of nodes and will allow the wallet to connect to other nodes.

Ruleland, which version is the latest one and where do we download it from? Also which conf file do we use?  The v0.1.1.2 does not sync.

Thanks

download it from the first page old util thread

https://bitcointalk.org/index.php?topic=797900.msg8975343#msg8975343

I first downloaded the main link in the old thread, but it doesn't even starts....
Then I  downloaded utilitycoin-win-0.2.1.3 here:
https://bitcointalk.org/index.php?topic=901629.msg10119490#msg10119490
but i didn't use the gaven UtilityCoin.conf
Now it seemes to sync fine... I'll try some withdrawal from cryptsy to see if it works... Anyway i can't be totally sure since there's no official block explorer...

[MiningMinion]

From about Utilitycoin menu i can read: v1.0.1.2: Experimental
Anyway it's the wallet downloaded from the first page of this thread, windows version.

In this case should i use connect= or addnode= ?

I suggest to use addnode.

Connect will only connect to the specified node, Addnode will add the node to the internal list of nodes and will allow the wallet to connect to other nodes.

Ruleland, which version is the latest one and where do we download it from? Also which conf file do we use?  The v0.1.1.2 does not sync.

Thanks

download it from the first page old util thread

https://bitcointalk.org/index.php?topic=797900.msg8975343#msg8975343

I first downloaded the main link in the old thread, but it doesn't even starts....
Then I  downloaded utilitycoin-win-0.2.1.3 here:
https://bitcointalk.org/index.php?topic=901629.msg10119490#msg10119490
but i didn't use the gaven UtilityCoin.conf
Now it seemes to sync fine... I'll try some withdrawal from cryptsy to see if it works... Anyway i can't be totally sure since there's no official block explorer...

did it work?

[pub111]

not syncing right now... even with nodes in UtilityCoin.conf 

[fartbags]

Where can I buy some more of this coin?

[infinitechaos]

Where can I buy some more of this coin?

Right now UTIL is listed only at Cryptsy.

[fartbags]

Where can I buy some more of this coin?

Right now UTIL is listed only at Cryptsy.

Not many cheap coins for sale on cryptsy. What happened to all the coins? Do the owners of bittrex have a fat sac of coins that they stole from everyone when it got delisted?

Bittrex is so mean. They should really get everyone their coins somehow. Keeping them seems illegal. They should email you a paper wallet or something.

[Epimetheus]

Just hold the bag and wait for a miracle

[synechist]

Breaking news.

Click for info.
http://1drv.ms/1C9FfbK

[Epimetheus]

We're getting started with a Util brainstorming session in the Blocknet's Think Tank.

Join in!

https://slack-files.com/T02PXPVUF-F04B1UYS8-509f9298f7

No news?

[NSA360]

Dead, ofc. Another one.

[coinyoo]

I have tried to synchronized my wallet but without success. Is there a good list with working nodes?

[tranzactionezlive]

You could help people by posting a working wallet asap, would really appreciate it.

[wildduck]

Mate i think dev is long gone.

[NSA360]

Mate i think dev is long gone.

#dead or #rekt.