Trying to run both GAW Fury and Gridseed issues with COM (usb)

[opL9dej2]

So i have a GAW Miner Fury (1.3mh/s) and a Gridseed
i just recently had to restore my pc due to the following..
On Device manager on Ports etc, says siliconlabs (for the Fury to work/noticed) but my Gridseed does not get
noticed, i tried installing the VTC drivers for the Gridseed, does not work, do i have to have another PC/motherboard?
I thought you could have multiple drivers..

[TechnoBibble]

you can have multiple drivers for each com port.

1) try a different cable.
2) try a different USB port.
3) try a different PC (if you can, just to confirm working).
4) check this out and try the drivers here (http://www.eyeboot.com/how-to-dualminer)
5) try different mining software to see if that recognizes it.

[AJinNYC]

Are you on windows? Try this:

https://github.com/nwoolls/MultiMiner/wiki/Drivers

Scroll down to the "OS/Custom CDC Driver".

[opL9dej2]

Thanks guys, i got it to STM32 to install now.
giving it some time, will report back when/if it works.


UPDATE: Okay got it to install, i see Virtual com port Stm, and the uart one in Universal bus devices etc.
but my Gridseed is flashing green in 1 sec intervals, and sometimes stays constant red, and flashes green, and just repeats.
nothing happening, no hashes being accepted.