Antminer S1 not mining

[The0nlyJP]

I have recently just got a antminer s1. After setting everything up like pool info etc. the miner just won't mine. I have left it for 1 hour and still no results. I'm using a 500w power supply, could this be the problem?
Thanks,

[Zich]

I have recently just got a antminer s1. After setting everything up like pool info etc. the miner just won't mine. I have left it for 1 hour and still no results. I'm using a 500w power supply, could this be the problem?
Thanks,

S1 power consumption is 360watt. What is you psu brand & type?

[The0nlyJP]

It's a Corsair CX500M. Also i changed a setting in the network tab on the miner for the ethernet from WAN to LAN and now i can't access it. Please help!

[Zich]

It's a Corsair CX500M. Also i changed a setting in the network tab on the miner for the ethernet from WAN to LAN and now i can't access it. Please help!

Put some load on 5V rail, like old cd rom.

Try to reset the miner. Push & hold the reset button.

[The0nlyJP]

Could you explain where the reset button is becasue i cant seem to find any good explainations...

[Zich]

Could you explain where the reset button is becasue i cant seem to find any good explainations...

Near ethernet port(on the right there is a hole) if i am not mistake.

[The0nlyJP]

Where?

http://gyazo.com/a8ae8ebd712345cb246b269071644c0c

(That's a picture)

[Zich]

Where?

http://gyazo.com/a8ae8ebd712345cb246b269071644c0c

(That's a picture)

Ahh, wrong version, sorry.
The reset button is S2 button.

This is the procedure https://www.bitmaintech.com/files/download/AntMiner%20S1%20FAQ.pdf

[The0nlyJP]

Is there anything i can do to reset it not in the software?
I saw this post

https://bitcointalk.org/index.php?topic=423654.msg6470820#msg6470820

[Zich]

Is there anything i can do to reset it not in the software?
I saw this post

https://bitcointalk.org/index.php?topic=423654.msg6470820#msg6470820

Try the S2 button & see what happen.

[The0nlyJP]

So, I have set everything up again but its still not mining? Don't know why.

[Zich]

So, I have set everything up again but its still not mining? Don't know why.

Could you post the screen shot of cgminer status page?

[The0nlyJP]

Which would be where?

[Zich]

Which would be where?

Something like this https://bitcointalk.org/index.php?topic=907219.msg9970598#msg9970598

[The0nlyJP]

http://gyazo.com/93057aa540e0ed416ba34859c0f8c58d

[Zich]

http://gyazo.com/93057aa540e0ed416ba34859c0f8c58d

Ok that weird. No board detected. Check if there is any loose connection from controller to hashing board.
Pool info also blank too. Could you please post miner configuration page?

[The0nlyJP]

http://gyazo.com/70eb8832e6ecf7244e060c8a8092b5ae

[Zich]

http://gyazo.com/70eb8832e6ecf7244e060c8a8092b5ae

The password not "X" right?
I don't know what wrong with your S1.

[The0nlyJP]

my password for my pools is x .

[Zich]

my password for my pools is x .

Try to change it to 123. Some pool didn't accept x as password.