Antminer c1 overclock, Potential ?

[Sakarias-Corporation]

how much could you squeeze out from a C1 overclocked ?
at a steady Level that is.

[Evan]

The chips can go to 400mzh with LN2 cooling roughly 2th/s

100% NOT worth the time or money...... you can OC on water to ~1.25th/s

[etile]

if you can't change voltage you can't overclock or underclock

1 TH is upper limit.

My AntC1 can't change voltage

[Evan]

if you can't change voltage you can't overclock or underclock

1 TH is upper limit.

My AntC1 can't change voltage

Are you sure??? I've seen OC sets up with people running the chips @375mzh 0800v getting ~1.5TH/s

(edit sorry put a 2 instead of a 3)

[etile]

if you can't change voltage you can't overclock or underclock

1 TH is upper limit.

My AntC1 can't change voltage

Are you sure??? I've seen OC sets up with people running the chips @275mzh 0800v getting ~1.5TH/s

Can they confirm that 0800v with voltmeter?

Can anybody show foto with diffrent from standart setting voltage on AntS3 or on AntC1?

PS. For 1.5TH you need @375mzh, not @275

[RadekG]

I have couple of C1s working at 1.2T (300MHz) at 775 to 815mV stable.

[etile]

I have couple of C1s working at 1.2T (300MHz) at 775 to 815mV stable.

Why you think you change voltage on device?
Do you have voltmeter?

[Sakarias-Corporation]

if you can't change voltage you can't overclock or underclock

1 TH is upper limit.

My AntC1 can't change voltage

Are you sure??? I've seen OC sets up with people running the chips @275mzh 0800v getting ~1.5TH/s

50% clock is awesome lol

[thedreamer]

Bump up. What sort of overclocks and temps do you guys get with them/ I just picked up a few. 

[adaseb]

Anybody have any luck getting these past 1.15-1.2Th/s. Seems 275-300Mhz is the most I can get.

For some reason upping the voltage past 0750, uses more watts but can't find any frequency where its stable at.

[dunand]

Anybody have any luck getting these past 1.15-1.2Th/s. Seems 275-300Mhz is the most I can get.

For some reason upping the voltage past 0750, uses more watts but can't find any frequency where its stable at.

The C1 is two S3 already overclocked with water cooling.

[notlist3d]

if you can't change voltage you can't overclock or underclock

1 TH is upper limit.

My AntC1 can't change voltage

Are you sure??? I've seen OC sets up with people running the chips @275mzh 0800v getting ~1.5TH/s

50% clock is awesome lol

I had 2 and never got near 1.5T.  It's been a while since I owened the C1's though.   That seems to high to be true, do you have any pictures of one doing 1.5T?

I can't imagine pushing them this hard.  50 percent of already pushed is hard to get.   That is only reason I am asking of picture of 1.5T with C1.