Corsair RM1000 W per cable

[vortexz]

Hello.I have 1 RM1000 with 2x6 PCI-Ecables with extension powering 1 SP20
How much W is it safe to pull per cable with RM1000 ? 1 cable is powering 2 PCI-E SLOTS on the SP20 .
Is it ok if it pulls 160 W on each slot, total of 320 W per cable ?

[1715462105]

1715462105

[1715462105]

1715462105

[1715462105]

1715462105

[1715462105]

1715462105

[1715462105]

1715462105

[1715462105]

1715462105

[vortexz]

right now I am drawing 160 W per slot, meaning 320 W per cable and cables are not hot, just a tiny bit warm
Do you think it would be safe to pull more per cable ?

[adaseb]

Your PSU has 8 PCIe connectors. Why are you only saying 2?

[vortexz]

it has 4+4
I have 2+2 left, other 2 I lost them.

[Zich]

it has 4+4
I have 2+2 left, other 2 I lost them.

You can not use EPS 4 + 4.

For each 6+2 PCIE cable the maximum load is 360 watt(10 ampere per wire). If you used maximum capability then the cable will be warm or hot.

[dunand]

If think RM1000 comes with 16AWG pcie cables. You can load without problems.

[sidehack]

As long as you don't exceed the current ratings on the cable's pin sockets, which will probably fail long before 16AWG wire would. Depending on if they're standard or high-spec pins, probably good for around 9 or 12 amps.