[FS] GS Server PSUs, boards & kits, Stickminers, GPU riser power, made in USA

[isoneguy]

antminer s7 s9 120v kit

2 HPcommon slot boards

10 cables

I like the versatility these setups provide.

[1715095934]

1715095934

[1715095934]

1715095934

[1715095934]

1715095934

[1715095934]

1715095934

[bandarfjb]

Hello, I am interested in miner hosting. Can you buy miner for me and host for me? Example for 1 year, after that you can send me the miner? Any complete detail?

[sidehack]

You can buy the miner and have it shipped here, and I will host it. I charge monthly, don't usually ask for extended contracts. Anyone hosting with me is free to have his miner shipped anywhere at any time.

[isamamin]

You can buy the miner and have it shipped here, and I will host it. I charge monthly, don't usually ask for extended contracts. Anyone hosting with me is free to have his miner shipped anywhere at any time.

any step by step guide for how to build 6xr9 290 rig ( including MB settings and of course the power setting-cables,risers and other stuff )_mining Eth
thanks

[vapourminer]

dps1200 psu kit arrived today.

currently dont have anything for it to power but just might have to put something on it tonight to see it run

[Biodom]

dps1200 psu kit arrived today.

currently dont have anything for it to power but just might have to put something on it tonight to see it run

My batch 2 S7 got recently connected to DPS1200 with sidehack's breakout board and it is flying at above 5Th  .
It was always a 4.65Th miner before. It is a great PSU!

[sidehack]

Yeah, the DPS1200 can be internally volt-adjusted from about 11.8 to 13.0V which means a 54-chip S7 can be taken up above 5TH (I've got one in hosting that pulls more like 5.3-5.4) or down to about 0.22J/GH (about 4TH/900W) without any real hacking.

Been running S7 and S9 (and even some S4+) off this PSU for a year with no issues. I've also just assembled the first test board of a new improved layout and it seems to work fine, so I may end up getting a fresh batch started sometime soon.

[sidehack]

Bumping this guy since it's been a while. I have DPS1200 kits in stock. Not a lot of PSUs but those can be had readily, however I have stacks of boards and cables on hand.

Also don't overlook the 2Pac 2xBM1384 stickminer, a new Compac version that's twice as good as the last one.

Development is ongoing in Bitfury 16nm miners (2-chip stick, 6-chip and 11-chip pods, 33-chip S1/S3/S5 refit boards) and a 7+1 port USB stud hub with adjustable per-port current limiting.

I've also got a bunch of available hosting space at 8.9 cents per kilowatt-hour, about $65 per kilowatt per month, which includes VPN remote access. No minimum, no contract; my hosting is built specifically for the little guy.

[adamvp]

Are you shipping to Europe?
I have some unused dpa 2500 bb, but with 6pin cables (was used to power antminer s7)

[sidehack]

In general yes, but if you're looking for boards for that PSU I don't have 'em.

[dddrgonzooo]

Do you have any DPS1200 PSU Kits available?

[sidehack]

Yeah. I'm restocking on PSUs so I'd need to wait for them to arrive but I've got everything else.


In case any of you GPU rig guys are interested, I can make cables for EVGA modular PSUs, including a cable to power a seventh GPU from the unused CPU power jack.

[dddrgonzooo]

I sent you a pm to order a couple boards and some cables.

[sidehack]

And both posting in this thread and sending me a PM get email alerts, so I was told four different ways that you sent me a message. Just the PM is enough.

[adamvp]

In general yes, but if you're looking for boards for that PSU I don't have 'em.

How much for cables for corsair RM series (molex/peg)? and how much shipping to Europe?

[Valnurat]

Can Dual-Purpose DPS800/DPS1200 Interface Board be used for all kind HP server models?

[sidehack]

That depends on how inclusive your "all kinds" is. They work for all HP Common Slot PSUs, which include 750W, 1200W and 1500W models.

[rockmoney]

Hey sidehack! I was wondering if you have any breakout boards for my HP 1500W PSU's running my S9's (the platinum server PSU's with a yellow sticker, model number HSTNS-PL33), or any better power solutions in general. I was also hoping to pick your brain a bit about running recent Antminer S9 batches (13.5TH/s) using only one HP 1500W PSU. Do you think the 1500W is sufficient to run one S9 on its own, and what other power option(s) might be better for this purpose?

I know you are still backed up with several ongoing and future products, but was hoping you/GekkoScience sold something to power a 13.5TH/s Antminer S9 sufficiently (or at least help power it). Please feel free to PM me if you prefer and/or need more specific details. As always, thank you very much!

[sidehack]

I don't have any 1500W PSUs on hand right now, the price went up like 60% from my regular supplier but they'll let me know when they can get some in cheaper.

My DPS812 breakout board is advertised as DPS800 and DPS1200 (hence the abbreviated name) but in supporting the DPS1200 it works for the entire HP Common Slot family. I've tested it on 750W, 1200W and 1500W PSUs. So I don't know the part number offhand but if that's what you're running, my board will do it.

I have some 13.5TH S9s in hosting right now running off the HP-CS 1500W Platinum PSU, probably around half a dozen total. I had lit them up on the 1200W initially because they'd power every other S9 I'd ever seen (even if it was a bit of a stretch), but those 13.5TH batch guys are hungry, man. Yes a 1500W will handle them quite nicely even in a high ambient heat.

[gt_addict]

Hi sidehack,

Have you got any of your breakout boards in stock. I was going to get one from bitshopper.de seeing as im in the UK, but he is out of stock. Wondered if you could chuck one in a padded envelope and wizz it over the pond?

Thanks.