Anyone interested in buying Dell 550W server PSU endplate connectors? I am putting together some of these for my own use but have to buy larger quantities and thus offload the excess. These PSU's can be used to power S1's, S3's and you can use 2 to power an S5 (or one S5 underclocked).
The connectors can be assembled with either one, two or no switches.
1. For one switch it can either be used for reducing the fan RPM (this noise) or the power. If you choose to have it control the fan, then the plug will ship always switched on.
2. For two switches, one os for the fan and the other for powering up.
3. No switches means the plug will be switched on.
The terminals I use are rated at 32 amps @ 300V each so easily cope with the 550W Dell server PSU.
I can also source the PSU's (when available) + the 6pin PCI-e cables.
Here are some images of the WIP - only remaining bit is adding the switches and putting them together.
The Parts
The semi assembled plug
I am initially looking to ship to the UK and EU for a start as shipping farther may be too expensive, however, if you are not cowed by that, by all means get in touch!
