[ANN] [VNL]- VanillaCoin.net [ New WhirlpoolX Algo ]

[Ptah]

I initiated a deposit just before my post, some 25 minutes ago.  C-Cex shows it is on 2 of 7 confirmations.  This is already much better than yesterday.  We'll see.

Okay, it went through, took an hour, but at least it beats yesterday.

My deposit was fully confirmed after 28 min

[BlackMarketKarma]

Hey dev, I've got an outgoing tx deposit to c-cex that seems to be in-stasis; however, it is not reflected in my balance in the wallet or on c-cex in my balance...please, some guidance. Thanks.

[JuanHungLo]

Hey dev, I've got an outgoing tx deposit to c-cex that seems to be in-stasis; however, it is not reflected in my balance in the wallet or on c-cex in my balance...please, some guidance. Thanks.

it's deja vu, all over again

[traumschiff]

Hey dev, I've got an outgoing tx deposit to c-cex that seems to be in-stasis; however, it is not reflected in my balance in the wallet or on c-cex in my balance...please, some guidance. Thanks.

Please open a support ticket on c-cex and write back with the results.

[Ptah]

Hey dev, I've got an outgoing tx deposit to c-cex that seems to be in-stasis; however, it is not reflected in my balance in the wallet or on c-cex in my balance...please, some guidance. Thanks.

Please open a support ticket on c-cex and write back with the results.

It looks at the problem from his own wallet and not with c-cex

[BlackMarketKarma]

If the source of the problem is indeed on my end it is inherent to the Vanillacoin wallet software for OSX or the VNL blockchain. I show the outgoing TX in my wallet but it reflects no confirmations as it's remained for over 24 hours now..yet the coins from the (frozen) TX are undoubtedly deducted from my balance shown in the wallet. If this were a regular Qt, a rescan and/or repair wallet etc..would more than likely solve the issue but alas..it is not. I'll open a ticket with c-cex and see what happens.

[BlackMarketKarma]

In any regard, I will keep this thread updated.

[traumschiff]

In any regard, I will keep this thread updated.

Thank you very much. Also please join us on freenode #vanillacoin there are some competent people there who may help.

[pseudonymdude]

If the source of the problem is indeed on my end it is inherent to the Vanillacoin wallet software for OSX or the VNL blockchain. I show the outgoing TX in my wallet but it reflects no confirmations as it's remained for over 24 hours now..yet the coins from the (frozen) TX are undoubtedly deducted from my balance shown in the wallet. If this were a regular Qt, a rescan and/or repair wallet etc..would more than likely solve the issue but alas..it is not. I'll open a ticket with c-cex and see what happens.

You can put the TXID in blockchain.vanillacoin.org

You can get the TXID by right-clicking the transaction and clicking copy.

If the TXID isn't on the blockchain, the problem is with your wallet, not with C-cex

You might have to use curl if you want them now.  Go to the IRC channel.  They might be able to help.  https://kiwiirc.com/client/irc.freenode.net/#Vanillacoin


john-connor is working on the console.

This coin is still a work in progress.

[traumschiff]

In any regard, I will keep this thread updated.

Wallet repair is possible this way: install curl and cmd box the following:

Linux: curl --user user --data-binary '{"jsonrpc": "1.0", "id":"123", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:9195/
Win: curl.exe --user user --data-binary \"{\"jsonrpc\": \"1.0\", \"id\":\"123\", \"method\": \"getinfo\", \"params\": [] }\" -H "content-type: text/plain;" http://127.0.0.1:9195/

People on IRC can help with this, a user just reported back with this working.

(If it's an issue with your wallet)

[Ptah]

In any regard, I will keep this thread updated.

Wallet repair is possible this way: install curl and cmd box the following:

Linux: curl --user user --data-binary '{"jsonrpc": "1.0", "id":"123", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:9195/
Win: curl.exe --user user --data-binary \"{\"jsonrpc\": \"1.0\", \"id\":\"123\", \"method\": \"getinfo\", \"params\": [] }\" -H "content-type: text/plain;" http://127.0.0.1:9195/

People on IRC can help with this, a user just reported back with this working.

(If it's an issue with your wallet)

This will give you information about the wallet
If you would like to fix wallet you have to write in the command line instead getinfo repairwallet

[BlackMarketKarma]

Appreciate these posts, you guys..

I am attempting to troubleshoot via the aforementioned methods and will report back again - hopefully with some positive results.

Also, in no way were my comments a bash or attack on VNL, the dev, or any of the minds behind the coin..totally understand that it is a work in progress, and a relatively early one at that.

Thanks again.

BTC    BTC

[jimlite]

In any regard, I will keep this thread updated.

Wallet repair is possible this way: install curl and cmd box the following:

Linux: curl --user user --data-binary '{"jsonrpc": "1.0", "id":"123", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:9195/
Win: curl.exe --user user --data-binary \"{\"jsonrpc\": \"1.0\", \"id\":\"123\", \"method\": \"getinfo\", \"params\": [] }\" -H "content-type: text/plain;" http://127.0.0.1:9195/

People on IRC can help with this, a user just reported back with this working.

(If it's an issue with your wallet)

This will give you information about the wallet
If you would like to fix wallet you have to write in the command line instead getinfo repairwallet

That worked for me on windows:
curl.exe --user user --data-binary \"{\"jsonrpc\": \"1.0\", \"id\":\"123\", \"method\": \"repairwallet\", \"params\": [] }\" -H "content-type: text/plain;" http://127.0.0.1:9195/

[Sema89]

can anyone give me the link for cpu miner please

[pseudonymdude]

can anyone give me the link for cpu miner please

You can go to pool01.vanillacoin.net and click getting started (there might be a faster/more optimized CPU miner in the vanillacoin.net forums), but a powerful CPU will only get you about 1/35th the hash of a powerful GPU.

[traumschiff]

In any regard, I will keep this thread updated.

Wallet repair is possible this way: install curl and cmd box the following:

Linux: curl --user user --data-binary '{"jsonrpc": "1.0", "id":"123", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:9195/
Win: curl.exe --user user --data-binary \"{\"jsonrpc\": \"1.0\", \"id\":\"123\", \"method\": \"getinfo\", \"params\": [] }\" -H "content-type: text/plain;" http://127.0.0.1:9195/

People on IRC can help with this, a user just reported back with this working.

(If it's an issue with your wallet)

This will give you information about the wallet
If you would like to fix wallet you have to write in the command line instead getinfo repairwallet

That worked for me on windows:
curl.exe --user user --data-binary \"{\"jsonrpc\": \"1.0\", \"id\":\"123\", \"method\": \"repairwallet\", \"params\": [] }\" -H "content-type: text/plain;" http://127.0.0.1:9195/

whops, copied the wrong link, sorry for that. What Jimlite wrote was the correct one.

Also feel free to join IRC and check out the VNL Bot for Curl commands.

Write in "!rpc " for commands. It has the following currently:

checkwallet, dumpprivkey, encryptwallet, getaccount, getaccountaddress, getbalance, getblock, getblockcount, getblockhash
getblocktemplate, getdifficulty, getinfo, listsinceblock, getmininginfo, getnetworkhashps, getnewaddress, getpeerinfo
getrawtransaction, gettransaction, listtransactions, repairwallet, submitblock, sendmany, sendtoaddress, validateaddress

[losk22]

Where is the hidden pools?

[traumschiff]

Where is the hidden pools?

Probably a private farm.

Some pools need to update their daemon, it's a bug.

[Sema89]

can anyone give me the link for cpu miner please

You can go to pool01.vanillacoin.net and click getting started (there might be a faster/more optimized CPU miner in the vanillacoin.net forums), but a powerful CPU will only get you about 1/35th the hash of a powerful GPU.

Yes, I'm know that a GPU more faster than CPU lol.
Why I can't enter to vanilla forums?
I'm getting this error every time

Code:

An error was encountered
Error: Unable to connect to MySQL and select database. MySQL reported: Too many connections.

[traumschiff]

can anyone give me the link for cpu miner please

You can go to pool01.vanillacoin.net and click getting started (there might be a faster/more optimized CPU miner in the vanillacoin.net forums), but a powerful CPU will only get you about 1/35th the hash of a powerful GPU.

Yes, I'm know that a GPU more faster than CPU lol.
Why I can't enter to vanilla forums?
I'm getting this error every time

Code:

An error was encountered
Error: Unable to connect to MySQL and select database. MySQL reported: Too many connections.

Vanillacoin.net is down because there are technical problems on the dev's place. "John-Connor: This is all I know right now: “We fixed this issue yesterday, but apparently, there are still some major issues. The technicians have been notified already."