IBM 2880W PSU/Breakout Boards - *NEW* Package deals for T9/S9 & A7

[Finksy]

Still have not received the spacers, and tracking # is not updating.  I have re-ordered from another company with FedEx express shipping from the US, one of the packages should arrive shortly, and I will ship boards on the same day.  I apologize for the delay, and will have compensation for those that have pre-paid and had delayed shipments.

[1715224021]

1715224021

[1715224021]

1715224021

[1715224021]

1715224021

[1715224021]

1715224021

[1715224021]

1715224021

[Finksy]

First 16 boards of this batch have shipped out. Now filling an order of 90, then will have stock for orders. I am looking at about 1.5 weeks to finish this current order off, anyone who's interested in ordering can PM me, orders will ship out in the order they are paid for.

[Finksy]

I have also added packages to the first page to make ordering easier.  Shipping will still be calculated individually, and price breaks can be had on large orders ($2,000+).

[monkeynutts]

Was any progress made with replacing the fans with something a little more quiet ?

I did see some posts that people were working on it but nothing conclusive as yet ?

cheers and apologies if im just being blind

[anamichii]

i want to buy The "Get Me Going" Package - $155
please calculate it, ship to yogyakarta, indonesia
i'l use bitcoin.

[Richardxom]

Can somebody tell me which is the bridge that I have to make in the PSU pins to AutoPower On?

[kaltar]

OK Finsky.

BTW thanks for the PSU Works great now.

i got a question you or someone else might be able to answer, i got this nice IP Power Stitch with scripting and auto ping etc that i want to use to rereboot my miners when they become offline. of course i can't plug the IBMs PSU in them cause 1. the power is 240V and the switch is 110. and 2. even if could it`s only 15amp. BUT what if i plugged a small 12v Power adapter to power a relay switch that will be triggered to on when power applied to it, and connect that instead of the on off switch on the breaker board of the IBM PSU.

this way i could reboot all my miners remotely or un attented. but i got no idead of the parts i would need for the "relay" or if that even is the proper word for it. let me know what you think. or any one else.
time is a factor cause i`m going on vacation next week for 2 weeks.

heck this could be even applied to regular PSU bridging the green and black wire to power them on.

Kaltar

[padrino]

OK Finsky.

BTW thanks for the PSU Works great now.

i got a question you or someone else might be able to answer, i got this nice IP Power Stitch with scripting and auto ping etc that i want to use to rereboot my miners when they become offline. of course i can't plug the IBMs PSU in them cause 1. the power is 240V and the switch is 110. and 2. even if could it`s only 15amp. BUT what if i plugged a small 12v Power adapter to power a relay switch that will be triggered to on when power applied to it, and connect that instead of the on off switch on the breaker board of the IBM PSU.

this way i could reboot all my miners remotely or un attented. but i got no idead of the parts i would need for the "relay" or if that even is the proper word for it. let me know what you think. or any one else.
time is a factor cause i`m going on vacation next week for 2 weeks.

heck this could be even applied to regular PSU bridging the green and black wire to power them on.

Kaltar

Fair approach given what you have, it should work.. In the case of the breakout boards, to the left of the switch they have two contacts, you can use those also to power on and off the board.. That should give you an easier option than playing with the switch itself..

[kaltar]

OK, tonight i will go to the electronic store and try to explain to the person what i want and hope he understands what i mean, and thank for the info on the contact point, it will make it easier.

[Marvell1]

Anyone able to get ahold of finsky? Not replying to any pms

[Finksy]

Had a very busy last week.  Replying to PM's now.  Will be able to ship from stock starting late this week or early next.

[kilo17]

I was wondering if you could make me up a custom set up - I essentially need the Pimp Daddy x2 - aka "Super Pimp Daddy".  I am good on the C19 cables.
Thanks

[padrino]

Did you crack the nut on the PSU connector shortage J4bber has keeping him making more boards for the next couple of months?

[Finksy]

All the boards that I send out are tested for failures before shipping, thank you.

Edit: I'm an idiot.  I thought you were referring to electrical shorting, in which I had 1 happen due to sloppy soldering 

[Finksy]

I was wondering if you could make me up a custom set up - I essentially need the Pimp Daddy x2 - aka "Super Pimp Daddy".  I am good on the C19 cables.
Thanks

Absolutely, PM'ing you now.

[kilo17]

waiting on the Super Pimp Daddy Price -- 

[Finksy]

waiting on the Super Pimp Daddy Price -- 

Sorry kilo, price coming your way. 

[J4bberwock]

Did you crack the nut on the PSU connector shortage J4bber has keeping him making more boards for the next couple of months?

The 3 pins connector that goes in the PSU will be available mid December, if I remember correctly. 15 weeks delay or something like that...
Finksy still have a fair amount of them in hands, and most of my remaining stock have been reserved by "you know who".
I'll also have the 4kw breakout board ready in a few days and first deliveries this month to compensate, if we really end up short of 2880w boards.

[Finksy]

Thanks J4bberwock,

I am finalizing a large order for a customer and will have boards and packages in stock as of late next week ready to ship out, shipping takes 4-5 business days anywhere in North America.  I will be drop-shipping PSU's for orders to the US to save on shipping and any potential customs issues from now on.  For us Canucks, I will have many PSU's in stock in about a month, but can still supply boards/cables in the meantime.

I can also take large orders still, as I have a reasonable stock of all the components still.

[VirosaGITS]

Thanks J4bberwock,

I am finalizing a large order for a customer and will have boards and packages in stock as of late next week ready to ship out, shipping takes 4-5 business days anywhere in North America.  I will be drop-shipping PSU's for orders to the US to save on shipping and any potential customs issues from now on.  For us Canucks, I will have many PSU's in stock in about a month, but can still supply boards/cables in the meantime.

I can also take large orders still, as I have a reasonable stock of all the components still.

Sweet, do you have a page with the price and available stuff that you have or will have? I'm interested in 16/18Pins long cable for S5/S7 and mayyybe PSU if they have same clean power and quiet as EVGA G2/GS's.