What its PSU Model for Antminer S4??

[mamb_elrey]

Hello.

I have a Antminer S4 and low voltage was turned off. He would not turn more and revising assumed it is the PSU. I need to buy a new PSU but not to (amazon, ebay) buy, because they do not model either.

Please can you help me a bit with this information. thx

[MCHouston]

To ensure you have power reserves for overclocking I would get an PSU that is 80+ Gold or Platinum 1500W Single rail.  You can do a multi rail but you will need to balance the power accross the rails.

[mamb_elrey]

Ok thanks.

But I was the same with your answer because it does not tell me which model or know a brand you can buy and fits exactly to antminer S4

Thanks

[Zich]

Ok thanks.

But I was the same with your answer because it does not tell me which model or know a brand you can buy and fits exactly to antminer S4

Thanks

The original psu on S4 is custom made psu. I doubt there is any server psu can fit in the case. Dogie said DPS2000bb is the closest.
The worse, you need to put the psu on the outside. Choose single rail psu like  EVGA 120-G2-1600-X1 1600W or 2 unit of EVGA SuperNOVA 850W

[mamb_elrey]

Hello, thanks for your help.

Now I have another question.

How do I connect the cables to the card antminer s4 ?? because the original cables are not equal to those who bring the psu you said ( external).

have over there some tutorial ??

Thank You

[Amph]

850 platinum from corsair will do the trick, or any 800+ from seasonic, i don't really like other brand, those are the best for me

[Zich]

Hello, thanks for your help.

Now I have another question.

How do I connect the cables to the card antminer s4 ?? because the original cables are not equal to those who bring the psu you said ( external).

have over there some tutorial ??

Thank You

You need some cut & soldering work. Just cut the original wire then solder them to new psu wire.