difference in shares among same cards

[AmDD]

Ive got 3 5850's in one rig all mining away on the same pool, the machine is running BAMT if that makes a difference. I just checked the status page and it shows one card has over 15000 shares accepted while the other two cards only have in the area of 2000. Settings are all the same and the clocks are within 50mhz. Whats causing this difference? Should I be worried?

[50BTC.com]

17000 shares for 24 hour seem normal for 3x5850.

[mc_lovin]

I've had that happen before.  It could be a disconnect that causes the share count to reset to zero on one card.  Try lower the clocks a bit and give it another 24 hours and see if it changes.

[mc_lovin]

or set up each card to have it's own worker on your pool, then use the pool stats to determine how many shares you have.

my next post is #1337!!

[AmDD]

I've had that happen before.  It could be a disconnect that causes the share count to reset to zero on one card.  Try lower the clocks a bit and give it another 24 hours and see if it changes.

I thought about doing that, Im just not sure how to go about it in BAMT. I'll have to play around with it I guess.