EliptiBox - Ultra secured Hardware Wallet packed with unique features.

[user2020]

I want to believe.

This is sending up all sorts of red flags. I'm sorry, but I just can't believe. It's too good to be true and we've seen so many scams using the same announcement strategy. Please come out into the open if you want us to trust you or at least partner silently with a known developer. I am very much looking forward to your open source to be released at some point. Good luck with your venture!

I am concerned about the page about investing has the most information, that and with zero updates I wouldn't hold my breath.

See the blog inside the website,

http://www.eliptibox.com/#!The-perfect-hardware-part-1-REDBLACK/cw4e/54fdf26b0cf24585978defdb

They have a lot of information there.
Acording to the picture, it is looks like they have final PCB layout.
I recognize that as a gerber files, it is the last stage that you get after finishing the pcb layout.
I think that to reach this step they need to be real company.

[1714172561]

1714172561

[1714172561]

1714172561

[1714172561]

1714172561

[1714172561]

1714172561

[EliptiBox]

Hello All,

We've started to sign transactions on the Testnet using our HW wallet prototype.
We apologize for the lack of updates. Until this month we have been very busy with the board, which is now in the final production stages and should be ready soon for components placement.

Now we are focused on the software side - both for the embedded and the mobile app.
We'll publish demos of the new SW and wallet features as they become available.

You can read more and see the transaction sign demo on our site:
http://www.eliptibox.com/#!EliptiBox-Prototype-Signs-Transactions/cw4e/552ec7fc0cf213f72454bbb0

You are welcome to contact us by our website anytime.

EliptiBox Team
www.eliptibox.com

[valkir]

Hope this gonna work! 

Biometric verification could be awesome!

Do you have a price in mind?

[EliptiBox]

Hope this gonna work! 

Biometric verification could be awesome!

Do you have a price in mind?

The price will be determined by the hardware, thus dependent on the volume. Production in large quantities can dramatically reduce the price. Unit cost can be anywhere between 20$ to 250$.
The volume of our next batch will be determined by the interest of the community and will have a large impact on the final price.
Please subscribe on our site to help us reduce the price.

EliptiBox Team
www.eliptibox.com

[coinhills]

Hope this gonna work! 

Biometric verification could be awesome!

Do you have a price in mind?

The price will be determined by the hardware, thus dependent on the volume. Production in large quantities can dramatically reduce the price. Unit cost can be anywhere between 20$ to 250$.
The volume of our next batch will be determined by the interest of the community and will have a large impact on the final price.
Please subscribe on our site to help us reduce the price.

EliptiBox Team
www.eliptibox.com

Range is too wide... I know what you mean.. 

Anyway, It's so interesting to me. looks cool. BT and Android connectivity with secure...
If around 100, many bitcoin fans might consider to buy one.
I wish all the features work perfectly as like described. good luck!
I've bookmarked your site..

[EliptiBox]

We have great news!

The first batch of circuit boards is here:

https://twitter.com/EliptiBox/status/590578197575688196
https://pbs.twimg.com/media/CDIntz-WYAEOrbc.jpg

Eliptibox coming to reality


EliptiBox Team
www.eliptibox.com

[yona]

ultra neat!!! 

[valkir]

Great job!  Can wait to see the first proto!

[Mashuri]

Greg Maxwell doesn't seem to be very impressed:

https://bitcointalk.org/index.php?topic=1022815.msg11265940#msg11265940

[EliptiBox]

Greg Maxwell doesn't seem to be very impressed:

https://bitcointalk.org/index.php?topic=1022815.msg11265940#msg11265940

We are glad that our solution is discussed in depth by community experts.
This is the intention from the beginning - to open technical details of our design on our site and in the near future all SW source code, to the community review (especially harsh ones). We want to create the best solution for bitcoin storage and to answer any shortcomings before the product is ready for delivery.

As for the issues raised by Greg Maxwell:

- Until recently we were very focused on the system hardware and software design with the emphasis on modular easy to use architecture. We are using Trezor crypto libraries for now in the internal system tests, as it is embedded-friendly. Before releasing the product we were planning to review the crypto quality with the help of the community and achieve the best implementation. Greg's insight sharpens the issues with this library and great need for improvement. We intend to use EliptiBox by ourselves and do not want to "leak" money.

- We spent a lot of time to plan highly energy-efficient power network. FPGA, BT modem and other components can be turned completely off to conserve battery. The FPGA is turned on only when needed to communicate transaction data for signing, so that the average power over time is negligible. Our power design allows the product to spend 2 years on standby or to sign 1000 transaction without charging.

- PCB ground:
  Board design complies to the strict EM field leakage prevention, so that our board has 6 layers with complete ground layer to close the loop together with the metal RF cages.

- Firewall:
  We've analysed many different approaches to secure decoupling between crypto HW and external world (including audio) and chose the FPGA as the most versatile and safe solution to prevent remote attacks on the HW. To ensure this, only RED crypto controller can load bitstream to FPGA. Remote attacker can not access the RED controller code through the firewall and can not change the bitstream.

Moreover, we'll offer the HW as a development platform with complete description, so that anyone can play with it and audit it's features.

Crypto algorithm has a crucial part in overall security. This is the reason we are going open source for feedback and swift adoption of all changes.

We are always glad to read any comments and advice and implement the resulting improvements to be shared with the community.

EliptiBox Team

www.eliptibox.com

[molecular]

interested! Also for other applications that require secure storage.

[EliptiBox]

Hi All,

We are happy to share that the first batch of the hardware is working and blinking LED  .
Also USB and BT are working well. The most critical milestone has passed OK.
 
The boards have been assembled in June and we are in the middle of HW tests and drivers completion.

Now we are focused on completing the software SDK for the board to enable open-source application development.
 
You are welcome to watch the actual board assembly process in the following video:
https://www.youtube.com/watch?v=MRVlSSbqaFg

Stay tuned on Twitter
https://twitter.com/EliptiBox.


Best Regards,

EliptiBox Team
www.EliptiBox.com

[valkir]

Awesome! Nice update. Cant wait to see the final product. Do you have price in mind?

[scarsbergholden]

Awesome! Nice update. Cant wait to see the final product. Do you have price in mind?

Pretty badass tech i most say, I also wonder what would be the price range for this and will you be doing bulk orders has well, I'm defendly interested have you guys thought about getting a kickstarted going so maybe you could release a few prototypes before the official launch.

[EliptiBox]

Awesome! Nice update. Cant wait to see the final product. Do you have price in mind?

Pretty badass tech i most say, I also wonder what would be the price range for this and will you be doing bulk orders has well, I'm defendly interested have you guys thought about getting a kickstarted going so maybe you could release a few prototypes before the official launch.

Hi,

The price will be determined by the hardware, thus dependent on the volume. Production in large quantities can dramatically reduce the price. We estimate that unit cost can be anywhere between 20$ to 250$.

So we are definitely interested in bulk orders.

The current first batch is for prototyping and getting feedback from the community.
We are able to bootstrap the prototypes without relatively complicated Kickstarter campaign.

Best Regards,

Eliptibox Team
www.EliptiBox.com

[scarsbergholden]

Hi,

The price will be determined by the hardware, thus dependent on the volume. Production in large quantities can dramatically reduce the price. We estimate that unit cost can be anywhere between 20$ to 250$.

So we are definitely interested in bulk orders.

The current first batch is for prototyping and getting feedback from the community.
We are able to bootstrap the prototypes without relatively complicated Kickstarter campaign.

Best Regards,

Eliptibox Team
www.EliptiBox.com

Hello Really appreciate the fast reply, I'll be watching for updates and pre order dates.


Thanks again and keep up that great work you guys are doing.


Cheers.

[Mitchell]

Well, I've just subscribed to your email service and would love to get my hands on one of these. It definitely looks promising. Are there any updates available?

[avatar_kiyoshi]

Looks awesome! how to make an order?
you have a stock? or it's made by order? looks like you need to add a pricing/order/pre-order page on your site.

[HeroCat]

Nice news  Let see how the ultra security wallet will work in real life 

[ub27]

lol that website looks ugly. Its like every second scam site on the web. If you want a nice design with a nice webdesign to your wallet PM me.