I will be reviewing a new server psu+ breakout board. Results and photos

Here is my guide line result for this testing an evga 1600 watt p2 platinum on a 120 volt 20 amp close to the circuit panel 10 gauge dedicated socket.
All tests will use this socket and will use 2 avalon 4's a silver model and a black model 1 rasp pi model b and a fan.

Plat Evga 1600 p2 comparsion

Gold evga 1300 g2 comparison

This will be the psu

http://www.plugloadsolutions.com/psu_reports/INTEL%20CORPORATION_DPS-1200TB%20A_1200W_SO-379_Report.pdf

Gigampz platinum kit... will include the psu and a new breakout board. run 2 sp20 under clock or 1 at 1350gh

Here are results for the Intel psu. The intel is very close in power use to the high end evga 1600 watt p2 model if you run it at 800 watts it is pretty quiet so it could stand alone with 1 sp20e at about 1300- 1350 gh speed.

the intel is 1000 watt plat at 120 volt and 1200 watt plat at 240 volt

-----------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------
hp to follow

close up of the hp . The hp is rated 850 watts at 120 and 1000 watts at 240. My 120 volt results are good due to the dedicated socket 2 feet from circuit panel.

---------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

Next up is the dell later today.

the dell is 750 watt

I will compare it using the evga 1600 p2 a 1600 watt psu plat psu run avalon 4.1

I will compare it using the evga 1300 g2 a 1300 watt gold psu run 2 avalon 4.1

I will compare it using the seasonic 1200 watt psu plat rating run 2 avalon 4.1

I will do all test with my avalon 4.1

measure with 2 different meters

the plug will be 120volt

from Pete from Gigampz.

I am self modding thread. I do not mind different opinions but I have had more then one thread loaded so I self mod.

Right now I don't have pricing info, but I hope for pete to fill it in.

I ran the 1000 watt HP over night and it is at 809 watts a little warm to the touch Not an issue.

809/1465 =.5522 watts a gh

It is 55-57 db at 3 feet high pitch not suitable to be in the same room but in no way nasty like an s-5 sounding fan.
I am using it with the pair of avalon 4.1's do they don't add noise as they are under 45db.

The evga 1600 p2 with the same 2 avalon's is at 48 db and it is a nicer pitch.

One of these would pair well with an sp20e set at 1300 gh. I will do that later today. I am now going to switch the hp with my evga 1600 p2 and give db reading and watt reading.

   So the Intel Plat is a plat does an easy 1000 watts close to a perfect match power wise to the 349 usd evga 1600p2 at the 1000 watt level.
   The breakout board is nice.
   This demo will be a keeper for me.

The Hp I will rate it gold is also a nice psu the breakout board has smaller screw connectors so I made up my busbar setup in the photos

The Dell is a classic piece of gear did not get to the 900 watt level but did go over 800 watts. I turned the fan down a bit. Low cost bronze power rating.

The break out board was nice with larger terminals.

Hoping for some prices here from pete and gigampz.com The plat package would be very good for some miners at the right price.

The gear came in 3 psu's 3 breakout boards.

well packed double boxed

bubble wrap and peanuts.

the dell is 750 watt

the intel is 1000 watt

the hp has 6 screw spots for + and 6 for -

I did a breakout for the break out from ground bars

here it is running

this 1000 watt psu is using 804 watts on this pair of avalon's and getting 1466gh

Kwatt

I wanted to attach 8 pcie cables the breakout board has 6 post and 6 neg. So I ran 4x 14 gauge from the positive to a bus bar and attached the 8 pos pcie cables

repeated this on the negative side

A close up on this psu reveals 850 watt rating for 120 volt and 1000 watt rating for 240 volt
I am plugged into a 120 volt outlet. It is a 2 plug outlet 20 amp circuit breaker about 3 feet from the main circuit panel the wires used were 10 gauge.
So I most likely am better then the normal 120 volt rating on this setup.

A close up of the breakout board

space.

Fast thoughts not crazy loud maybe the 2 small fans help lower the noise.

at 804 watt and 1466 gh the pair of avalons are giving me .5484 watts per gh.

The unit is not warm so it can do a lot more.

I will hook my evga 1600 p2 platinum up to this tomorrow to compare efficiency

I consider the psu below to be the best consumer psu ever made even better then the CORSAIR AX1500i !!

http://www.amazon.com/EVGA-Supernova-Platinum-1600-Watt-220-P2-1600-X1/dp/B00NJG61JQ/ref=sr_1_1?ie=UTF8&qid=1426303969&sr=8-1&keywords=evga+1600+p2

http://www.ebay.com/itm/EVGA-SuperNOVA-220-P2-1600-X1-1600W-ATX12V-EPS12V-SLI-Ready-80-PLUS-Platinum-C-/381043283807?

http://www.newegg.com/Product/Product.aspx?Item=N82E16817438037&cm_re=evga_1600_p2-_-17-438-037-_-Product

space

@ prelude you can post now.

You're playing with the finest power supplies in existence, nobody makes them better than Delta. I know you'll love them, their build quality trounces anything available to consumers in the ATX form factor. Delta are what every PSU manufacturer aspires to be. I imagine the only downside you'll find is the noise.

Looking forward to actually reading your thoughts instead of predicting them! Cheesy

Edit: Looks like the Dell isn't manufactured by Delta?

I am glad Philipma1957 is doing more types of reviews around here. I like all the pictures and can not wait to hear your review once it is done. I am most curious about the sound levels with these PSU.

Quote from: ScryptAsic on March 14, 2015, 03:31:47 AM

Late going to watch Jimmy Fallon with the wife.

I will meter it and the evga's on sat

Quote from: philipma1957 on March 14, 2015, 03:14:43 AM

I consider the psu below to be the best consumer psu ever made even better then the CORSAIR AX1500i !!

http://www.amazon.com/EVGA-Supernova-Platinum-1600-Watt-220-P2-1600-X1/dp/B00NJG61JQ/ref=sr_1_1?ie=UTF8&qid=1426303969&sr=8-1&keywords=evga+1600+p2

Almost, but not quite. Wink

I'm using this bad boy to power an SP20E right now, but intend to find a more suitable job for it eventually.

Numero uno... One bad motha

I should note that I would never have purchased that PSU, I got it in a trade for 3 GPUs. If I had a need for a mining PSU I'd 100% go with a server PSU.

Another nice addition you did. Will be interesting to see. Would love to see it beat the plat. psu. But I'm guessing in gold range.

Quote from: notlist3d on March 14, 2015, 04:24:41 AM

Another nice addition you did. Will be interesting to see. Would love to see it beat the plat. psu. But I'm guessing in gold range.

the plat evga p2 1600 uses 739 watts the hp 1000 watt server used 809 watts.

this was on a 20 amp 120 volt circuit only 1 socket on the line and 10 gauge 20 amp about 3 or 4 feet from the breaker.

I need to check this as 739 vs 809 is a lot it is about 70 x 24 = 1.68 kwatts a day or at my rates of 13 cents 21.8 cents a day more money.

now I switched it out with a evga 1300 g2 running a sp20e I was using 801 watts running the evga it is using 835 watts running the hp now that is 34 x 24 = that is .816 kwatts a day extra or 10.61 cents a day

Does running miner on server psu is better?

Except the difference in noise what is the purpose of using server psu? Price?

Im curious cause Im wondering if I shoud switch to serverpsu.

Let me know! Grin

Quote from: ScryptAsic on March 14, 2015, 03:31:47 AM

I am most curious about the sound levels with these PSU.

Mines quite loud, louder than every other heatsink I have (ignoring SP30/35 ones).

Quote from: valkir on March 14, 2015, 04:07:57 PM

well one of these hp's with 120 volt will run a sp20e at 1343 gh and use 835 watts

an evga 1300 g2 will run a sp20e at 801 watts

If you are lucky you can get the evga at 150 usd .

The server is cheaper and smaller.

Pete should chime in from gigampz.com let us know the price for 1 hp dps-800gb a and 1 break out board along with 4 pcie wires as it is his kit I am testing.

Now the cost of .8 kwatts a day comes to 300 kwatts a year that is 30 dollars a year running a sp20e . At 120 volts.

I don't have 240 volt but I can do some testing with high quality transformers they will allow for higher volts to the psu and give me a good idea of what the watt improvement is at 240 volt.

I just hooked the hp server to a variac that maxes at 140 volts and can do 10 amps. so the psu is now on 140 volt power not 120 volt power.

it was using 835 watts at 120 volts at 140 volts watts drop to 827.

I am looking for my 240 volt variac. Sold the 240 watt variac 2 months ago just remembered.

Well so much for 240 volt testing.

I just hooked up the intel 1000 watts at 120 volts and 1200 watts at 240 volts.

Quiet it is using 120 volts.

Quote from: philipma1957 on March 14, 2015, 02:24:38 AM

the intel is 1000 watt

the intel is far better then the hp

it is 1000 watts at 120 volts and 1200 watts at 240 volts

pretty quiet .

I have it hooked up to 1 sp20e and I am getting better results sound wise and watts per gh then the hp

I am a bit busy but I want to show this better over the next 2 days and I will.

This intel server psu and break outboard appear to work better then the hp psu and breakout board

His website isn't showing platinum pkg. let alone other server psu's. Is this available just through the forums? Huh

Quote from: Meech on March 14, 2015, 07:20:11 PM

His website isn't showing platinum pkg. let alone other server psu's. Is this available just through the forums? Huh

not sure he gave me zero info on pricing just shipped me the gear.

Straight up if he is selling the intel model in the photo does 1000 watts at 120 volts and 1200 watts at 240 volt. it is very good.

I would recommend it as a buy if it was cheap. It appears to do gold or plat numbers and it is quiet.

This will be the psu

http://www.plugloadsolutions.com/psu_reports/INTEL%20CORPORATION_DPS-1200TB%20A_1200W_SO-379_Report.pdf

Gigampz platinum kit... will include the psu and a new breakout board. run 2 sp20

the intel is 1000 watt 120 volts 1200 watts 240 volts

Thank you philipma1957 for this great review.

I hope you make a review for 2880 server PSU, with some guide on how to soldering the PCI to the PSU with out the need for breakout board if this available.

Thank you.

	Author	Topic: I will be reviewing a new server psu+ breakout board. Results and photos (Read 3818 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.