[ANN] CRAVE 1st POS Masternodes | Dark Assets | I2P | Market =Embrace The Dark=

[Jengo]

can you help me please, i'm a lost noobie
I've tried to start another crave.exe with .bat and another directory for files (i copied another crave.exe in this directory to use it), and i got a message that connexion to port 0.0.0.0.0:30104 is impossible, and crave.exe already in use (of course cause i run a 1st mn on this computer).
Then it tells me that it can't connect to any port, and have to use -listen=0.
i didn't configure the 2nd .conf file at all and just run the 2nd crave.exe for the 1st time.
Do you know why i can't launch crave.exe twice ? Must i copy it or use always the same one for both ?

-datadir=C:\Users\*****\AppData\Roaming\CraveMasterNode2

add that to the second exe shortcort. you will need to copy and paste the old roaming folder and change the name

That's mean that we have to create a new folder in\AppData\Roaming\newfoldername\ . What about wallet data?? Should be new one or old one?? ...Man...my masternode is flying now. I got today 9 payments
9 x 0.6666666 I wish to know better and more about multiple masternodes in one system .I'm running two at seperate systems  and I have enough to add six more..But I'm already tired after start the second one.
Thank you again.I wish we have more people like you at this thread .Good job

trying get help meself no one helping or just doesnt know whats wrong. Ye it needs be a new wallet for your new masternode. just set it up the same way. and change the rpc port

I'm not an expertise in this thing so I can't help you guys.

It's a bit late so I think tomorrow somebody can help you guys out. I suggest you are coming into slack, much better to investigate such things than in BCT.

edit: ok I see ICM is already helping you out

[borris123]

NEED SOME MAJOR HELP. Really stressing me out now. i thought it was my router not forwarding ports so i went and got another and it still not working. I cant even get 1 node to start now. It was working with 8 until i transfered them onto another computer now none will work on either. I have tried it as just my ip as well. I can still transfer coins in and out.

not capable masternode: Could not connect to ggqcfezddpm6m7kt.onion:9999

The port 9999 is forwarded on the bt hub but it still is not showing on canyouseeme.org I rang up BT and they said its part of the hub that it will not show on sites like that.

tor is set up correctly.

HiddenServiceDir C:\Users\James\Desktop\Tor Browser\hidden_service 1
HiddenServicePort 9999 127.0.0.1:9999

HiddenServiceDir C:\Users\James\Desktop\Tor Browser\hidden_service 2
HiddenServicePort 9999 127.0.0.1:9999

HiddenServiceDir C:\Users\James\Desktop\Tor Browser\hidden_service 3
HiddenServicePort 9999 127.0.0.1:9999

My conf is right!

rpcallowip=127.0.0.1
rpcuser=****
rpcpassword=*****
server=1
rpcport=9998
daemon=1
listen=0
staking=0
masternodeaddr=ggqcfezddpm6m7kt.onion:9999
masternode=1
port=9999
masternodeprivkey=*****

and my exe is -tor=127.0.0.1:9050

It all worked before i dont have a clue what i did.

You have your port config backwards.  It is the P2P ports that have to all be different.  port=9999, port=9998, etc.

I cant even get 1 to work. just changed the conf to this to test

rpcallowip=127.0.0.1
rpcuser=ajhflasjfansofhsaodsadgdad436trgasfasfasf4w5w
rpcpassword=asfhaljksdfklasnjclkas7ur3qhrfusadt4wtdfsfsdgsgaefafdsdgsdvs
server=1
rpcport=9999
daemon=1
listen=0
staking=0
masternodeaddr=g3f6v6wbp76eqzz7.onion:9999
masternode=1
port=9999
masternodeprivkey=****

not capable masternode: Could not connect to g3f6v6wbp76eqzz7.onion:9999

still the same.

Dont understand why was working once then once i transfered to another computer the stuff it wont work on any now

[industrialcoinmagic]

NEED SOME MAJOR HELP. Really stressing me out now. i thought it was my router not forwarding ports so i went and got another and it still not working. I cant even get 1 node to start now. It was working with 8 until i transfered them onto another computer now none will work on either. I have tried it as just my ip as well. I can still transfer coins in and out.

not capable masternode: Could not connect to ggqcfezddpm6m7kt.onion:9999

The port 9999 is forwarded on the bt hub but it still is not showing on canyouseeme.org I rang up BT and they said its part of the hub that it will not show on sites like that.

tor is set up correctly.

HiddenServiceDir C:\Users\James\Desktop\Tor Browser\hidden_service 1
HiddenServicePort 9999 127.0.0.1:9999

HiddenServiceDir C:\Users\James\Desktop\Tor Browser\hidden_service 2
HiddenServicePort 9999 127.0.0.1:9999

HiddenServiceDir C:\Users\James\Desktop\Tor Browser\hidden_service 3
HiddenServicePort 9999 127.0.0.1:9999

My conf is right!

rpcallowip=127.0.0.1
rpcuser=****
rpcpassword=*****
server=1
rpcport=9998
daemon=1
listen=0
staking=0
masternodeaddr=ggqcfezddpm6m7kt.onion:9999
masternode=1
port=9999
masternodeprivkey=*****

and my exe is -tor=127.0.0.1:9050

It all worked before i dont have a clue what i did.

You have your port config backwards.  It is the P2P ports that have to all be different.  port=9999, port=9998, etc.

I cant even get 1 to work. just changed the conf to this to test

rpcallowip=127.0.0.1
rpcuser=ajhflasjfansofhsaodsadgdad436trgasfasfasf4w5w
rpcpassword=asfhaljksdfklasnjclkas7ur3qhrfusadt4wtdfsfsdgsgaefafdsdgsdvs
server=1
rpcport=9999
daemon=1
listen=0
staking=0
masternodeaddr=g3f6v6wbp76eqzz7.onion:9999
masternode=1
port=9999
masternodeprivkey=****

not capable masternode: Could not connect to g3f6v6wbp76eqzz7.onion:9999

still the same.

Dont understand why was working once then once i transfered to another computer the stuff it wont work on any now

rpcport and port have to be different ports.  Port is for the P2P communication, rpcport is for local rpc connections.

Edit: and when you transferred to new computer, did you update your onion hostname?

[webprods]

can you help me please, i'm a lost noobie
I've tried to start another crave.exe with .bat and another directory for files (i copied another crave.exe in this directory to use it), and i got a message that connexion to port 0.0.0.0.0:30104 is impossible, and crave.exe already in use (of course cause i run a 1st mn on this computer).
Then it tells me that it can't connect to any port, and have to use -listen=0.
i didn't configure the 2nd .conf file at all and just run the 2nd crave.exe for the 1st time.
Do you know why i can't launch crave.exe twice ? Must i copy it or use always the same one for both ?

-datadir=C:\Users\*****\AppData\Roaming\CraveMasterNode2

add that to the second exe shortcort. you will need to copy and paste the old roaming folder and change the name

That's mean that we have to create a new folder in\AppData\Roaming\newfoldername\ . What about wallet data?? Should be new one or old one?? ...Man...my masternode is flying now. I got today 9 payments
9 x 0.6666666 I wish to know better and more about multiple masternodes in one system .I'm running two at seperate systems  and I have enough to add six more..But I'm already tired after start the second one.
Thank you again.I wish we have more people like you at this thread .Good job

Update... copy and paste all, except wallet data . Change ports in conf .thats mean that on the screen or task bar we'll see  two or more  crave wallet icons ??am I right ???Well...I will try  tonight.

Just counting  ...If one masternode can bring for me  8- 9 payments a day   9 x 0.66666666 = 5.999 crave  .Six masternodes should bring at list 28 - 30 new crave a day  x 30 = 840  -900 crave coins a month
840 x 7 bucks for crave = $ 5880 a month ...Now I understood why and for what  fight is going on.Well I'm not going sell a single Crave from today  

[borris123]

NEED SOME MAJOR HELP. Really stressing me out now. i thought it was my router not forwarding ports so i went and got another and it still not working. I cant even get 1 node to start now. It was working with 8 until i transfered them onto another computer now none will work on either. I have tried it as just my ip as well. I can still transfer coins in and out.

not capable masternode: Could not connect to ggqcfezddpm6m7kt.onion:9999

The port 9999 is forwarded on the bt hub but it still is not showing on canyouseeme.org I rang up BT and they said its part of the hub that it will not show on sites like that.

tor is set up correctly.

HiddenServiceDir C:\Users\James\Desktop\Tor Browser\hidden_service 1
HiddenServicePort 9999 127.0.0.1:9999

HiddenServiceDir C:\Users\James\Desktop\Tor Browser\hidden_service 2
HiddenServicePort 9999 127.0.0.1:9999

HiddenServiceDir C:\Users\James\Desktop\Tor Browser\hidden_service 3
HiddenServicePort 9999 127.0.0.1:9999

My conf is right!

rpcallowip=127.0.0.1
rpcuser=****
rpcpassword=*****
server=1
rpcport=9998
daemon=1
listen=0
staking=0
masternodeaddr=ggqcfezddpm6m7kt.onion:9999
masternode=1
port=9999
masternodeprivkey=*****

and my exe is -tor=127.0.0.1:9050

It all worked before i dont have a clue what i did.

You have your port config backwards.  It is the P2P ports that have to all be different.  port=9999, port=9998, etc.

I cant even get 1 to work. just changed the conf to this to test

rpcallowip=127.0.0.1
rpcuser=ajhflasjfansofhsaodsadgdad436trgasfasfasf4w5w
rpcpassword=asfhaljksdfklasnjclkas7ur3qhrfusadt4wtdfsfsdgsgaefafdsdgsdvs
server=1
rpcport=9999
daemon=1
listen=0
staking=0
masternodeaddr=g3f6v6wbp76eqzz7.onion:9999
masternode=1
port=9999
masternodeprivkey=****

not capable masternode: Could not connect to g3f6v6wbp76eqzz7.onion:9999

still the same.

Dont understand why was working once then once i transfered to another computer the stuff it wont work on any now

rpcport and port have to be different ports.  Port is for the P2P communication, rpcport is for local rpc connections.

Edit: and when you transferred to new computer, did you update your onion hostname?

tried disabling firewall.

I have updated the onion host name. It wont work on my other computer now either with exact same settings and i didnt delete or change anything :S its as if once the other computer starting syncing with that wallet it messed it all up. I have tried transfering and making a new wallet but it does nothing. i can move coins around fine but no masternode

[industrialcoinmagic]

tried disabling firewall.

I have updated the onion host name. It wont work on my other computer now either with exact same settings and i didnt delete or change anything :S its as if once the other computer starting syncing with that wallet it messed it all up. I have tried transfering and making a new wallet but it does nothing. i can move coins around fine but no masternode

Are you running DHCP?  Is it possible you forwarded your port to one IP but now your computers have new IPs?

[borris123]

tried disabling firewall.

I have updated the onion host name. It wont work on my other computer now either with exact same settings and i didnt delete or change anything :S its as if once the other computer starting syncing with that wallet it messed it all up. I have tried transfering and making a new wallet but it does nothing. i can move coins around fine but no masternode

Are you running DHCP?  Is it possible you forwarded your port to one IP but now your computers have new IPs?

at first i didnt even have ports forwarded. I only forwarded them when it stopped working. I had 1 node working at one point on the other computer then dunno what i did that stopped working as well.

[industrialcoinmagic]

tried disabling firewall.

I have updated the onion host name. It wont work on my other computer now either with exact same settings and i didnt delete or change anything :S its as if once the other computer starting syncing with that wallet it messed it all up. I have tried transfering and making a new wallet but it does nothing. i can move coins around fine but no masternode

Are you running DHCP?  Is it possible you forwarded your port to one IP but now your computers have new IPs?

at first i didnt even have ports forwarded. I only forwarded them when it stopped working. I had 1 node working at one point on the other computer then dunno what i did that stopped working as well.

I noticed you have listen=0.  Try listen=1.

[borris123]

tried disabling firewall.

I have updated the onion host name. It wont work on my other computer now either with exact same settings and i didnt delete or change anything :S its as if once the other computer starting syncing with that wallet it messed it all up. I have tried transfering and making a new wallet but it does nothing. i can move coins around fine but no masternode

Are you running DHCP?  Is it possible you forwarded your port to one IP but now your computers have new IPs?

at first i didnt even have ports forwarded. I only forwarded them when it stopped working. I had 1 node working at one point on the other computer then dunno what i did that stopped working as well.

I noticed you have listen=0.  Try listen=1.

changed that nothing =/ what could i have done lol?

[guppy]

can you help me please, i'm a lost noobie
I've tried to start another crave.exe with .bat and another directory for files (i copied another crave.exe in this directory to use it), and i got a message that connexion to port 0.0.0.0.0:30104 is impossible, and crave.exe already in use (of course cause i run a 1st mn on this computer).
Then it tells me that it can't connect to any port, and have to use -listen=0.
i didn't configure the 2nd .conf file at all and just run the 2nd crave.exe for the 1st time.
Do you know why i can't launch crave.exe twice ? Must i copy it or use always the same one for both ?

-datadir=C:\Users\*****\AppData\Roaming\CraveMasterNode2

add that to the second exe shortcort. you will need to copy and paste the old roaming folder , and change the name

I did exactly like that:
StartMasterNode1.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode1

StartMasterNode2.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode2


with one crave qt.exe in the Subfolder, and the same roaming content in each "CraveMasterNode1 and 2" folder (except wallet of course), but same result

Appreciate your help

Ok, i got it !
i just forgot to add port=9999 in my 2nd wallet
now it's ok, both are running, gonna set my 2nd masternode then

Thanks for your help !

[borris123]

can you help me please, i'm a lost noobie
I've tried to start another crave.exe with .bat and another directory for files (i copied another crave.exe in this directory to use it), and i got a message that connexion to port 0.0.0.0.0:30104 is impossible, and crave.exe already in use (of course cause i run a 1st mn on this computer).
Then it tells me that it can't connect to any port, and have to use -listen=0.
i didn't configure the 2nd .conf file at all and just run the 2nd crave.exe for the 1st time.
Do you know why i can't launch crave.exe twice ? Must i copy it or use always the same one for both ?

-datadir=C:\Users\*****\AppData\Roaming\CraveMasterNode2

add that to the second exe shortcort. you will need to copy and paste the old roaming folder , and change the name

I did exactly like that:
StartMasterNode1.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode1

StartMasterNode2.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode2


with one crave qt.exe in the Subfolder, and the same roaming content in each "CraveMasterNode1 and 2" folder (except wallet of course), but same result

Appreciate your help

Ok, i got it !
i just forgot to add port=9999 in my 2nd wallet
now it's ok, both are running, gonna set my 2nd masternode then

Thanks for your help !

no prob. just dont see why mine stopped working =/

[goblynn]

lol @ bittrex depth chart....looks like somebody set loose a bot

[tkon3]

No selling volume, too much bagholders

[primosource]

I noticed you have listen=0.  Try listen=1.

ICM, can you help me with that problem ?

I'm trying to setup my second MN from my desktop with same IP but different port and i'm receiving this error from second wallet MN, first MN is running fine on port 9999. But I can't run on any other port. My wallet version is v1.4.1.0-g32a928e.

https://i.imgur.com/6otCfDp.png

Now, I'm trying this conf
first crave.conf MN

Code:

maxconnections=100
rpcuser=***
rpcpassword=***
rpcport=9970
port=9999
listen=1
gen=0
server=1
daemon=1
staking=0
reservebalance=9999999
masternodeaddr=192.168.25.55:9999
masternode=1
masternodeprivkey=****
rpcallowip=127.0.0.1

second crave.conf MN

Code:

maxconnections=100
rpcuser=***
rpcpassword=***
rpcport=9971
port=9998
listen=1
gen=0
server=1
daemon=1
staking=0
reservebalance=9999999
masternodeaddr=192.168.25.55:9998
masternode=1
masternodeprivkey=****
rpcallowip=127.0.0.1

[goblynn]

No selling volume, too much bagholders

only 170k coins on bittrex...82k coins in masternodes and 213k coins staking and we havent even really burned many crave..only roughly 3200 crave have been burned so far..which is about 20k blur

[industrialcoinmagic]

I noticed you have listen=0.  Try listen=1.

ICM, can you help me with that problem ?

I'm trying to setup my second MN from my desktop with same IP but different port and i'm receiving this error from second wallet MN, first MN is running fine on port 9999. But I can't run on any other port. My wallet version is v1.4.1.0-g32a928e.



Now, I'm trying this conf
first crave.conf MN

Code:

maxconnections=100
rpcuser=***
rpcpassword=***
rpcport=9970
port=9999
listen=1
gen=0
server=1
daemon=1
staking=0
reservebalance=9999999
masternodeaddr=192.168.25.55:9999
masternode=1
masternodeprivkey=****
rpcallowip=127.0.0.1

second crave.conf MN

Code:

maxconnections=100
rpcuser=***
rpcpassword=***
rpcport=9971
port=9998
listen=1
gen=0
server=1
daemon=1
staking=0
reservebalance=9999999
masternodeaddr=192.168.25.55:9998
masternode=1
masternodeprivkey=****
rpcallowip=127.0.0.1

You need the latest wallet from Friday.  The latest Windows wallet is in the OP, for Linux you can clone github and compile it.

[guppy]

can you help me please, i'm a lost noobie
I've tried to start another crave.exe with .bat and another directory for files (i copied another crave.exe in this directory to use it), and i got a message that connexion to port 0.0.0.0.0:30104 is impossible, and crave.exe already in use (of course cause i run a 1st mn on this computer).
Then it tells me that it can't connect to any port, and have to use -listen=0.
i didn't configure the 2nd .conf file at all and just run the 2nd crave.exe for the 1st time.
Do you know why i can't launch crave.exe twice ? Must i copy it or use always the same one for both ?

-datadir=C:\Users\*****\AppData\Roaming\CraveMasterNode2

add that to the second exe shortcort. you will need to copy and paste the old roaming folder , and change the name

I did exactly like that:
StartMasterNode1.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode1

StartMasterNode2.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode2


with one crave qt.exe in the Subfolder, and the same roaming content in each "CraveMasterNode1 and 2" folder (except wallet of course), but same result

Ok, i got it !
i just forgot to add port=9999 in my 2nd wallet
now it's ok, both are running, gonna set my 2nd masternode then

Thanks for your help !

Well, i spoke to fast, my 2nd mn doesn't want to sync, i haven't got any active connexion
may I add something else in my crave.conf file ? (it's not a mn yet, i haven't transfer the 500 crave to this wallet, so it runs like a normal wallet).

maxconnections=100
rpcuser=xxx
rpcpassword=xxx
rpcport=9998
port=9999
gen=0
rpcallowip=127.0.0.1

[goblynn]

can you help me please, i'm a lost noobie
I've tried to start another crave.exe with .bat and another directory for files (i copied another crave.exe in this directory to use it), and i got a message that connexion to port 0.0.0.0.0:30104 is impossible, and crave.exe already in use (of course cause i run a 1st mn on this computer).
Then it tells me that it can't connect to any port, and have to use -listen=0.
i didn't configure the 2nd .conf file at all and just run the 2nd crave.exe for the 1st time.
Do you know why i can't launch crave.exe twice ? Must i copy it or use always the same one for both ?

-datadir=C:\Users\*****\AppData\Roaming\CraveMasterNode2

add that to the second exe shortcort. you will need to copy and paste the old roaming folder , and change the name

I did exactly like that:
StartMasterNode1.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode1

StartMasterNode2.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode2


with one crave qt.exe in the Subfolder, and the same roaming content in each "CraveMasterNode1 and 2" folder (except wallet of course), but same result

Ok, i got it !
i just forgot to add port=9999 in my 2nd wallet
now it's ok, both are running, gonna set my 2nd masternode then

Thanks for your help !

Well, i spoke to fast, my 2nd mn doesn't want to sync, i haven't got any active connexion
may I add something else in my crave.conf file ? (it's not a mn yet, i haven't transfer the 500 crave to this wallet, so it runs like a normal wallet).

maxconnections=100
rpcuser=xxx
rpcpassword=xxx
rpcport=9998
port=9999
gen=0
rpcallowip=127.0.0.1

try adding

addnode=104.207.135.83

[primosource]

You need the latest wallet from Friday.  The latest Windows wallet is in the OP, for Linux you can clone github and compile it.

Oh, think it's working now. thank you.

[guppy]

Thx a lot goblynn , it's working now