That wallwart will work,IF the barrel connector is 2.1mm x 5.5mm.
I used these,just make sure you have positive & negative correct,on a normal PC PSU,yellow is positive,black is negative:
http://www.amazon.com/gp/product/B0058RLD9C/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1Each orb can use up to 10 watts,so only put 2 on 1 4pin molex cable=20 watts.I made my cables with these 4pin molex connectors:
http://www.frozencpu.com/cat/l3/g51/c387/s999/list/p1/Connectors-4_Pin_Connectors-Molex_-_Male-Page1.htmlhttp://www.frozencpu.com/products/1926/ele-94/FrozenCPU_ConnectRight_Standard_4-pin_Male_Connector_-_Black.html?tl=g51c387s999Be sure to add the pins,they do not come with them unless you check the box below marked "Add Gold Plated Male Pins",you don't need the gold ones,regular are fine
![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
Also,on a 4pin molex you have 12 volt (yellow) & 5 volt (red) each has it's own negative (black),it's closest to each,keep them paired
![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
May not make a difference,but I keep em paired & have no issues.
You only use the 12 volt wires,you don't need the 5 volt,so just use 2 pins (yellow & black wire next to it) in your 4pin molex connector
![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
Here's one I made for 6pin PCIE to run 3 orbs
![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FcCxpRld.jpg&t=663&c=Qo-EN3ssqnbkGQ)
I ran 20 orbs off one 6pin PCIE=150-200 watts.