Bitcoin Forum

https://bitcointalk.org/index.php?topic=1257327.msg14136125#msg14136125


As per kilo17 and BlockC

650 per unit  with minimum of 10 units.

I ran two of these and they went well.

What we do is place btc to me I send to BlockC  

If you are west coast BlockC drop ships it to you for 12 bucks ups ground.

If you are east coast I get them and ship them out to you  for 15-20 bucks.  Depends how close to NJ 07731

If you are in center of country most likely 12 usd  drop ship from  BlockC

You get an:

avalon6
a rasp pi with software
a power supply = a wall wart for the rasp pi
2 usb cables
1 little blu light usb to 4 pin wire adapter
1 4 pin wire cable


1)  I would want 1 or  2 units.  .  I pd for 1
2) jonnybravo0311     2  .             pd for 2
3) Biffa                      2  .
4) talks_cheep           1  .             pd for 1
5) tlhIlwI                   1 .              pd for 1
6) Mikestang              1  .
7) pikachuy                1 .             pd for 1
8) HagssFIN               1 .             pd for 1
9) Kuulani                  1 .             Pd for 1
10) jmunich                2.             pd for 2

Okay this is  more  10 or 11 on order and 9 units are  paid for.

I will start collecting in 3 hours   10pm eastern standard time  as we have enough to order

we need to get to 10 we are at  7 to 9 right now


monies will be here please wait to send.


Please send coins by 2pm thurs today!. - eastern standard time

I will quote your pm.  only pay to this address

and I put a dust number at the end  like 2.00001234  btc  those last four mark your proof of payment

Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD


I will want to send money by thurs day  5 pm eastern standard time  so it can be shipped from blockc on thurs ? or fri this week


okay so far

Philipma1957  paid for one unit

https://blockchain.info/tx/40a3d3ec1957b0db82f086d66ae0fd9e55a44e804a512820c8978c3511e6c357


I have sent pm's out to

1)talks_cheep
2)Mikestang
3)jonnybravo0311
4)pikachuy
5)HagssFIN
6)Biffa
7) tlhIlwI
8 ) Kuulani
9) jmunich ----waiting on shipping info

all pm's use this payment address


Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD

$650?

I'm in for 2.

Phil, you might want to clarify the power supply is the wall wort for the Pi - not a PSU for the Avalon.  Unless you're including the Avalon PSU in the $650 price, which would be unbelievable.

  Fixed it.

Just a tip. If you are using ATX power supply to power your miners. You can build yourself a custom cable from a free AUX connector on your power supply to power the raspberry PI. You just need a 5V and a ground. 

I'm in for one Phil as before. Need to ship to UK however.

I will take 1, will need ship to California.

Hey philipma1957, when is the cut off time for this group buy?

Time is quick. I would think thurs  5pm east coast time.

This allows shipping on Thursday from blockc

Phil you have run these before right? How do they compare to say running a SP20 from a power/heat perspective?

Just deciding whether to get get 2 or 1 to replace my two SP20

I'm not philipma but I'd like to chime in since I have both sp20 and a6. To me, A6 offers a perfect replacement opportunity for SP20 from power/heat perspective; my sp20 runs around 1.3 TH consuming about 800 watts, while my A6 runs around 3.5 TH consuming around 900 Watts. Heat wise, they're about the same. So, for about 100 watts more, I'm getting 2.2 TH extra over the SP20. Sound wise, A6 is quieter, but I did replace the A6 stock fan (non-delta) with a Sanyo Denki Ace fan which in my ear produces more pleasing sound than the stock fan in my SP20. A6 is a perfect replacement for an SP20. The build quality is similar. Both SP20 and A6 units exude quality from the moment you open up the box they came in. I'm planning on replacing all my SP20 Jacksons with A6 as soon as I can.

This  is pretty good description.

I have 11 Sanyo Denki Ace fans from this order

http://www.amazon.com/gp/product/B00YOC80IO?

I will give  8  away (keep 3 for me)  as  they fit in the box and are superior to the stock fan in version 2.

Phil, Kilo you have stop with those buy group as I always want to buy more.

Bitfury's chips scares me at the moment.

It's a great price for a great device IMO.

Add me to the list for one please.

Add me to the list for 1, it's time I add a current generation piece of gear to my collection.  The price here is right, it's less than the S7, and I would rather support Avalon than Bitmain.  I am looking to start hosting gear, this might be a good piece to start with.

I assume you will contact us with payment instructions?  Thanks, Phil.

I will start asking for btc to the avalon address in my signature profile


Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD


https://bitcointalk.org/index.php?action=profile;u=64507

Hey philipma1957, include me for +1 for this group buy please. Thanks.

Hi Phil,

I'm in for one, if it is reasonable and possible to ship to Finland.

pm me a city and a postal code I will see how much it costs.

@ biffa

same thing pm me a postal code and your city in the uk

OK change my order to two.

As for postage. I'll pm you.

Am I supposed to pm philipma or wait for him to pm me with payment instruction? I'm so confused.  >:(

check your pm


send it to my group buy adress


If you can send by Thur  12pm - 2 pm Eastern standard time

It should be good.   earlier then that is also good. I plan to send funds to blockC at 5pm eastern standard time.  thurs.

Once I send them to blockC,   I no longer can refund it.
BlockC prefers that I do one send for all of us.




Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD

https://bitcointalk.org/index.php?action=profile;u=64507


https://blockchain.info/address/1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD

Best Regards ,

Phil


when you send in payments make sure to quote  the pm I sent to you.

make sure to include your shipping addresses


everyone has their pm.

I have paid for one unit.


https://blockchain.info/tx/40a3d3ec1957b0db82f086d66ae0fd9e55a44e804a512820c8978c3511e6c357

talks_cheep paid for one unit  At talks_cheep  please quote the pm I sent you and send me a shipping address thanks

https://blockchain.info/tx/ad49552c53baa2835979dc7e8156f52b4d9f52c8185b27bd6ddbabce4b6b7db1


Philipma1957 ------pd---- shipping address---- known
talks_cheep  -------pd ---- shipping address --- ?

@philipma,

I sent you the amount you quoted in pm to me.

I don't know how to quote the pm you sent to me in my payment to you, hope it's okay.

send me your shipping address via pm  I will quote it back to verify your shipping address

ok, sent you my shipping address.

Got we are good.

Thank you very much, Philip!

Payment sent as per the instructions in the PM.

@philipma1957, payment sent for my part. Please confirm. Thanks.

check your pms:

send it to my group buy adress
If you can send by Thur  12pm - 2 pm Eastern standard time
It should be good.   earlier then that is also good. I plan to send funds to blockC at 5pm eastern standard time.  thurs.
Once I send them to blockC,   I no longer can refund it.
BlockC prefers that I do one send for all of us.
Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD
https://bitcointalk.org/index.php?action=profile;u=64507
https://blockchain.info/address/1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD
Best Regards ,
Phil


when you send in payments make sure to quote  the pm I sent to you.

make sure to include your shipping addresses


everyone has their pm.

I have paid for one unit.

philipma1957
https://blockchain.info/tx/40a3d3ec1957b0db82f086d66ae0fd9e55a44e804a512820c8978c3511e6c357

talks_cheep
https://blockchain.info/tx/ad49552c53baa2835979dc7e8156f52b4d9f52c8185b27bd6ddbabce4b6b7db1

jonnybravo0311
https://blockchain.info/tx/15f807adc8b5f6c4cf7a14291d92863a96043bfd524140efd83c64e7ea66b54e

pikachuy
https://blockchain.info/tx/53b142ebf765fa59751f1a69981303c45192dd938682941de1bb865e3879e1fa



Philipma1957 ------pd---- shipping address---- known----  1 unit
talks_cheep  -------pd ---- shipping address --- Known---- 1 unit
jonnybravo0311----pd ---- shipping address ---- known---- 2 units
pikachuy -----------pd ------shipping address ---- known --- 1 unit

talked and sent pm's to all

please make effort to have coins in before 2pm eastern standard time

I will do send at 5pm  to blockC

  remember to send  your  shipping addresses etc.

If you're taking any more, I'd be in for 2.

still have time

shoot me a pm with you shipping info so I can figure shipping price

check your pms:

send it to my group buy adress
If you can send by Thur  12pm - 2 pm Eastern standard time
It should be good.   earlier then that is also good. I plan to send funds to blockC at 5pm eastern standard time.  thurs.
Once I send them to blockC,   I no longer can refund it.
BlockC prefers that I do one send for all of us.
Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD
https://bitcointalk.org/index.php?action=profile;u=64507
https://blockchain.info/address/1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD
Best Regards ,
Phil


when you send in payments make sure to quote  the pm I sent to you.

make sure to include your shipping addresses


everyone has their pm.

I have paid for one unit.

philipma1957
https://blockchain.info/tx/40a3d3ec1957b0db82f086d66ae0fd9e55a44e804a512820c8978c3511e6c357

talks_cheep
https://blockchain.info/tx/ad49552c53baa2835979dc7e8156f52b4d9f52c8185b27bd6ddbabce4b6b7db1

jonnybravo0311
https://blockchain.info/tx/15f807adc8b5f6c4cf7a14291d92863a96043bfd524140efd83c64e7ea66b54e

pikachuy
https://blockchain.info/tx/53b142ebf765fa59751f1a69981303c45192dd938682941de1bb865e3879e1fa

HagssFin
https://blockchain.info/tx/14d3ff1e980c9deb9271505006e5c4707b8b3cad5b1651bb2ae6868485df69e3

tlhIlwI
https://blockchain.info/tx/84a391cb7cb5c2c52120b9a3e98947b7f6d6a9b47abfca98d2c939947f49468e

jmunich
https://blockchain.info/tx/99b0cae3090f68372b977341355c8a7fbd6471ed4d8b38293fbd16b1383ac574

Kuulani
https://blockchain.info/tx/96c945dec989450700ecbce3c2dbbaaaa08cd157f987b9495afb60aba35b6fcc

Biffa
https://blockchain.info/tx/d725f862aa3f35cbae3a7dd55abf6e051e5508b60c22b9381d01cf5fb3f66ea7

Philipma1957 ------pd---- shipping address---- known----  1 unit ---------------- to NJ
talks_cheep  -------pd ---- shipping address --- Known---- 1 unit ---------------- to CA
jonnybravo0311----pd ---- shipping address ---- known---- 2 units -------------- to OR - Hosting
pikachuy -----------pd ------shipping address ---- known --- 1 unit  -------------- to CA
HagssFin -----------pd-------shipping address----- known --- 1 unit --------------- to Me in NJ then  Finland
tlhIlwI ------------- pd--------shipping address-----known ----1 unit --------------- TN
jmunich ----------- pd---------shipping address-----known ----2 units ------------- to FL
Kualani -------------ps----------shipping address-----known ----1 units ------------- to OR
Biffa ---------------pd -----------shipping address-----known ----2 units ------------- to me in NJ then UK

talked and sent pm's to all but jmunich I am waiting for his pm pd


please make effort to have coins in before 2pm eastern standard time

I will do  the send at 5pm thurs    to yan of  blockC

  remember to send  your  shipping addresses etc.

waiting for below


6) Mikestang              1  .


3) Biffa                      2  . pd

9) Kuulani                  1  . pd. on my iPad but I will fully update later


10) jmunich                2 . pd




12 units paid for  waiting for 1 guy ordering 1 unit

Paid, PM sent

marked



we are waiting on mikestang


I am going for a walk on the beach as it will be 83f in NJ


when I come back  I will check if mikestang has paid and all others are confirmed then do the send to blockC

 I would like send earlier then 5 pm eastern standard time as  it gives us a good chance for yan to ship today.

rather then fri.

wish i had seen this thread before i got to work and didnt have access to my btc would have loved to get an avalon they seem to be major block finder on kano.

what is your zip code.  if you are near NJ  I can make it work for you.

check your pms:

send it to my group buy adress
If you can send by Thur  12pm - 2 pm Eastern standard time
It should be good.   earlier then that is also good. I plan to send funds to blockC at 5pm eastern standard time.  thurs.
Once I send them to blockC,   I no longer can refund it.
BlockC prefers that I do one send for all of us.
Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD
https://bitcointalk.org/index.php?action=profile;u=64507
https://blockchain.info/address/1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD
Best Regards ,
Phil


when you send in payments make sure to quote  the pm I sent to you.

make sure to include your shipping addresses


everyone has their pm.

I have paid for one unit.

philipma1957
https://blockchain.info/tx/40a3d3ec1957b0db82f086d66ae0fd9e55a44e804a512820c8978c3511e6c357

talks_cheep
https://blockchain.info/tx/ad49552c53baa2835979dc7e8156f52b4d9f52c8185b27bd6ddbabce4b6b7db1

jonnybravo0311
https://blockchain.info/tx/15f807adc8b5f6c4cf7a14291d92863a96043bfd524140efd83c64e7ea66b54e

pikachuy
https://blockchain.info/tx/53b142ebf765fa59751f1a69981303c45192dd938682941de1bb865e3879e1fa

HagssFin
https://blockchain.info/tx/14d3ff1e980c9deb9271505006e5c4707b8b3cad5b1651bb2ae6868485df69e3

tlhIlwI
https://blockchain.info/tx/84a391cb7cb5c2c52120b9a3e98947b7f6d6a9b47abfca98d2c939947f49468e

jmunich
https://blockchain.info/tx/99b0cae3090f68372b977341355c8a7fbd6471ed4d8b38293fbd16b1383ac574

Kuulani
https://blockchain.info/tx/96c945dec989450700ecbce3c2dbbaaaa08cd157f987b9495afb60aba35b6fcc

Biffa
https://blockchain.info/tx/d725f862aa3f35cbae3a7dd55abf6e051e5508b60c22b9381d01cf5fb3f66ea7


r00t$
https://blockchain.info/tx/c87e4705aa8667819e62f6557b41c2a45ad0c39d309e09e2cbc0331b35b4a781


Philipma1957 ------pd---- shipping address---- known----  1 unit ---------------- to NJ
talks_cheep  -------pd ---- shipping address --- Known---- 1 unit ---------------- to CA
jonnybravo0311----pd ---- shipping address ---- known---- 2 units -------------- to OR - Hosting
pikachuy -----------pd ------shipping address ---- known --- 1 unit  -------------- to CA
HagssFin -----------pd-------shipping address----- known --- 1 unit --------------- to Me in NJ then  Finland
tlhIlwI ------------- pd--------shipping address-----known ----1 unit --------------- TN
jmunich ----------- pd---------shipping address-----known ----2 units ------------- to FL
Kualani -------------ps----------shipping address-----known ----1 units ------------- to OR     full one sent thanks


Biffa ---------------pd -----------shipping address-----known ----2 units ------------- to me in NJ then UK  I need full address + phone



talked and sent pm's to all but jmunich I am waiting for his pm pd


please make effort to have coins in before 2pm eastern standard time

I will do  the send at 5pm thurs    to yan of  blockC

  remember to send  your  shipping addresses etc.

waiting for below


6) Mikestang              1  .


3) Biffa                      2  . pd

9) Kuulani                  1  . pd. on my iPad but I will fully update later


10) jmunich                2 . pd




12 units paid for  waiting for 1 guy ordering 1 unit

I'm going to pass on this one  >:( (I would buy two more but you know :P)

But thanks to Phil and Kilo to give us a great opportunity to get more AV6  ;D

You guys are awesome !

Hey Phil. Count me in for one. I'll be awaiting your PM. Thanks!

okay  I need a zip code. but I will send a pm

pm sent please send funds asap

right now we have 12 paid for

waiting on:

mikestang

r00t$  ---- pd thank you


and legacy2005 is passing this time

check your pms:

send it to my group buy adress
If you can send by Thur  12pm - 2 pm Eastern standard time
It should be good.   earlier then that is also good. I plan to send funds to blockC at 5pm eastern standard time.  thurs.
Once I send them to blockC,   I no longer can refund it.
BlockC prefers that I do one send for all of us.
Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD
https://bitcointalk.org/index.php?action=profile;u=64507
https://blockchain.info/address/1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD
Best Regards ,
Phil


when you send in payments make sure to quote  the pm I sent to you.

make sure to include your shipping addresses


everyone has their pm.

I have paid for one unit.

philipma1957
https://blockchain.info/tx/40a3d3ec1957b0db82f086d66ae0fd9e55a44e804a512820c8978c3511e6c357

talks_cheep
https://blockchain.info/tx/ad49552c53baa2835979dc7e8156f52b4d9f52c8185b27bd6ddbabce4b6b7db1

jonnybravo0311
https://blockchain.info/tx/15f807adc8b5f6c4cf7a14291d92863a96043bfd524140efd83c64e7ea66b54e

pikachuy
https://blockchain.info/tx/53b142ebf765fa59751f1a69981303c45192dd938682941de1bb865e3879e1fa

HagssFin
https://blockchain.info/tx/14d3ff1e980c9deb9271505006e5c4707b8b3cad5b1651bb2ae6868485df69e3

tlhIlwI
https://blockchain.info/tx/84a391cb7cb5c2c52120b9a3e98947b7f6d6a9b47abfca98d2c939947f49468e

jmunich
https://blockchain.info/tx/99b0cae3090f68372b977341355c8a7fbd6471ed4d8b38293fbd16b1383ac574

Kuulani
https://blockchain.info/tx/96c945dec989450700ecbce3c2dbbaaaa08cd157f987b9495afb60aba35b6fcc

Biffa
https://blockchain.info/tx/d725f862aa3f35cbae3a7dd55abf6e051e5508b60c22b9381d01cf5fb3f66ea7


r00t$
https://blockchain.info/tx/c87e4705aa8667819e62f6557b41c2a45ad0c39d309e09e2cbc0331b35b4a781


Philipma1957 ------pd---- shipping address---- known----  1 unit ---------------- to NJ
talks_cheep  -------pd ---- shipping address --- Known---- 1 unit ---------------- to CA
jonnybravo0311----pd ---- shipping address ---- known---- 2 units -------------- to OR - Hosting
pikachuy -----------pd ------shipping address ---- known --- 1 unit  -------------- to CA
HagssFin -----------pd-------shipping address----- known --- 1 unit --------------- to Me in NJ then  Finland
tlhIlwI ------------- pd--------shipping address-----known ----1 unit --------------- TN
jmunich ----------- pd---------shipping address-----known ----2 units ------------- to FL
Kualani -------------pd----------shipping address-----known ----1 unit ------------- to OR     full one sent thanks
r00t$ ---------------pd-----------shipping address-----known ---- 1 unit ------------ to IL

Biffa ---------------pd -----------shipping address-----known ----2 units ------------- to me in NJ then UK  I need full address + phone



talked and sent pm's to all but jmunich I am waiting for his pm pd


please make effort to have coins in before 2pm eastern standard time

I will do  the send at 5pm thurs    to yan of  blockC

  remember to send  your  shipping addresses etc.

waiting for below


6) Mikestang              1  .


3) Biffa                      2  . pd

9) Kuulani                  1  . pd. on my iPad but I will fully update later


10) jmunich                2 . pd




12 units paid for  waiting for 1 guy ordering 1 unit.


Okay waiting for mikestang to send

@ mikestang   please remember to check that a proper fee is sent.


I will close this at 5pm  today east coast time.

we have a stalled  tx id

which may delay the send a bit.


https://blockchain.info/tx/c87e4705aa8667819e62f6557b41c2a45ad0c39d309e09e2cbc0331b35b4a781


since blockC want one send and now the wallet has coins not confirmed we are stalled.

I will ask around how to fix it.

once again why no one should ever use antpool or anyone that does empty blocks.

please remember this. 

 And there has to be way to fix a bad send (feeless)  other then me asking pool owners to add in the bad (feeless) send


this send was an armory send  so if you have armory check your settings.

Saw this and had to not participate.  It'll go great as usual because Phil rocks :)

Sorry for being the last guy to send payment, I am on the west coast and my bank didn't open until 9AM, then I had to wait for my btc purchase to go through.  I sent the funds and added extra fee to get them confirmed quickly and they made it on the very next block.

https://blockexplorer.com/tx/adac7c60c0301377f2aa05c6f46aeebf4fcb4ed95926e488d27a450ffccde77a
or
https://blockchain.info/tx/adac7c60c0301377f2aa05c6f46aeebf4fcb4ed95926e488d27a450ffccde77a

But it looks like we have an unconfirmed tx so I guess I'm not really last.

I have not sent you my shipping address, please tell me how you would like me to send it.

Thanks!

Yeah, somebody went with 0 BTC tx fee  :P

Well then I'd like to thank them for costing me extra fee to make sure my tx went through speedily... sheesh!  ::)

I hope they did that by mistake, kinda a bonehead maneuver.

it happens he used armory

I am trying to free most of the 23+ coins for a send.

they are here and I may have them ready to clear soon.

https://blockchain.info/address/1AyWHY6kCMi4F221J7aPheiYdAvkDbcdPp

I freed coins with clever moving and shifting
I am ready to do send coins

to blockc

I am waiting confirm here of group buy and that  the address below is the BlockC address.


https://blockchain.info/address/127J5mDr4cGtSuNt2iJ1V673kyZRrkQSs3


we ordered 14 units.

7 to me for reshipping.

and 7 drop shipped.

please send a post to let us know what story is.

Okay I shifted and moved coins paid some fees talked to kano to see if he could push transaction and the coins are free and have been sent to  

blockc   btc address


https://blockchain.info/address/127J5mDr4cGtSuNt2iJ1V673kyZRrkQSs3


https://blockchain.info/tx/790de0bad727c45043ca636a259d70b768302c9adc0cc06b96042adfede260f4

funds are cleared and in blockc address above.



the funds below are for shipping the  7 units that come to me.


https://blockchain.info/address/1AyWHY6kCMi4F221J7aPheiYdAvkDbcdPp


this is the frozen  pay  due to an armory  foul up of no feed paid.

https://blockchain.info/tx/c87e4705aa8667819e62f6557b41c2a45ad0c39d309e09e2cbc0331b35b4a781

I sent funds from  my account to cover this unit.

this was r00t$ order.

sometime shit happens but all units are ordered.

we will wait to see how this tx id is handled.

r00t$  order will come to my house for reshipping


here are the purchases and how they will ship

7 to me

1) philipma1957

2) r00t$ ---------- IL

3) HagssFin -------FIN

4+5) biffa --------- UK

6+7) jmunich ---- FL


drop ship direct from blockC

8+9) jonnybravo0311 ---- OR
10)  tlhIlwI----------------- TN
11)  pikachuy--------------  CA
12)  talks_cheep----------  CA
13)  KuuKani -------------- OR
14)  Mikestang------------- CA

And the great state of California wins for most orders!  We tie our west coast cousin Oregon for number of units ordered.  :)

Thanks for handling this, Phil, can't wait to play with my new toy.  I'll pull my psu off my S5 and get my extra 850watt out of the closet, plug them both in, and mess with the A6 when it arrives, but at $0.30/kW-h and up I will be having it hosted for the long-term.

Waiting on tracking from Yan of blockC

He has been sent coins.  a shipping pm and an email pm.


I will post updates as they come along.


Lastly the fee less block cleared so we are all good.

I laid the coin out for that so blockC has already been paid.

If any one has armory they need to look out for this.

I got around the delay by shifting  all the funds but the stuck ones and then added my own funds to cover it.

I am glad I found it and did that  instead of sending unconfirmed coins to blockC

Yan contacted me via email last nite. 

A piece of the email exchange.

Is below:



His reply to me late last nite:


They're boxed up and going out tomorrow




My email to him:

On Mar 10, 2016 8:49 PM, "philsbeast" <philipma1957@.xxx> wrote:

Hi Yan  ,  I sent in an order today for 14 avalon6’s

I sent a personal message on bitcointalk.org

Personal Messages Index


14 UNITS ordered 7 to me 7 drop ship

my cell phone is

I sent 22.40 coins

Bitcoin Address 127J5mDr4cGtSuNt2iJ1V673kyZRrkQSs3

Bitcoin Transaction 790de0bad727c45043ca636a259d70b768302c9adc0cc06b96042adfede260f4




xxx  redacted for privacy

Phil, your cell number is showing, you may want to edit it out.

thanks.

 I get enough crank calls as it is.

Thanks for covering Phil. Don't know how it sent without a fee. Looks like it went through though.

Looks like I'll spend some time to update the core and Armory over the weekend. It had been a while since I loaded my wallet up. Regardless, I appreciate the work on your end.

 

No worries I caught it before I did the send to blockC.

I had coins in other wallets did all the shifting sent it and then your funds cleared about seven hours later.

I was surprised you send did clear with a fee of zero.

Most of the time that would not clear.

phil, can you confirm they were sent out? thanks for your hard work, much appreciated.

I will pm Yan to be sure.  He sent me the email last nite that all 14 pieces were packed and ready to ship Friday.



I sent him a pm a few minutes ago.

i got tracking
i get 7 in NJ ON WEDS
2 to uk
2 to FL
1 to FINLAND
1 to IL
1 to me

jonnybravo0311 will get his  2 in oregon on tues
kuklani                 gets 1 to oregon on tues

thats 10 so four more to follow

pikachuy  will get his 1 to CA on monday
mikestang will get his 1 to CA on tues
talks_cheep will get his one to CA on on tues

tlhIlwI will get his one to TN on fri

Thanks again Phil for organizing all of this.  :)

Phil, if you are interested doing another buy, I am in for 1 possibly 2 units

I have to clear this one .

By that I need to get the seven to my house test and ship them out.

Since three of those seven go out of the country. I really want to be sure I am shipping working gear.

So if I do another it will be no sooner then Friday next week.

Thanks, Philip! I've checked the tracking info you provided and UPS will deliver mine on Tuesday, prolly late in the evening as usual. I will triple, maybe quadruple my hashrate before the halving.

Got my tracking info, thanks, Phil.  I will post up once I receive the unit and have it hashing.

This one A6 is going to triple my hashrate. :)

I would also be interested in the next group buy as well

first one to be delivered is to


 pikachuy  it arrived today in CA                          1 unit


mikestang           due to CA      on           tues     1 unit

talks-cheep         due to CA      on           tues      1 unit

jonnybravo0311  due to hosting in OR  on tues    2 units

Kuklani                      due to OR on tues             1 unit

tlhIlwI                   due in TN on Fri                    1 unit



me                       7 units due in NJ on weds   1 for me 6  to reship

1 goes to finland
2 goe to UK
1 goes to IL
2 to Miami


BTW  I found really good boxes to ship 2 packs.


I grabbed some today.


http://www.lowes.com/pd_475929-33-475929___?productId=50098524&pl=1&Ntt=boxes++heavy

Yup, everything is received, can't play with it yet, still at work. ><

these boxes from lowes are heavy duty and are a bit smaller for shipping.

So when I send a 2 pack to the U.K. and to FL


I will be using them

https://i.imgur.com/DTOiVUB.jpg

https://i.imgur.com/1J7EDBh.jpg

https://i.imgur.com/lAlXrgO.jpg


the single box shipments I will reuse blockC boxes

so 1 down and 13 to go.





If all goes well maybe I will open a group buy on sunday 20th to end on tuesday 22nd

please let us know shipping updates

1 item has been delivered to pikachuy


2 items have been delivered to jonnybravo0311



13 in route 11 in route





The shipments to Or

are on time and will arrive today

That is 2 for hosting jonnybravo0311-------------------------------2 delivered!

and 1 for Kuklani-----------------------------------------------------1

the CA shipments

talks_cheep-----------------------------------------------------------1
Mikestang    are on trucks and out for delivery today--------------1

the shipment to TN is due fri----------------------------------------1


the 7 to me are due on weds
1 for me
2 for U.K.
1 for Finland
2 for FL
1 for IL

Yup... my miners have been delivered and are currently being setup :)

1 item has been delivered to pikachuy
2 items have been delivered to jonnybravo0311
1 item has been dropped off to mikestang

13 in route
11 in route

10 in route




The shipments to Or

are on time and will arrive today

That is 2 for hosting jonnybravo0311-------------------------------2 delivered!

and 1 for Kuklani-----------------------------------------------------1

the CA shipments

talks_cheep-----------------------------------------------------------1
Mikestang    are on trucks and out for delivery today--------------1 delivered!

the shipment to TN is due fri----------------------------------------1


the 7 to me are due on weds
1 for me
2 for U.K.
1 for Finland
2 for FL
1 for IL

Some good news and some bad news.

My 7 pack just arrived 1 day early

I will be able to ship a 2 pack to jmumich today.

I won't be able to ship to r00t$ today  his address is not complete please pm your name  to me asap.





I will ship to the UK and to Finland tommorrow

I want to test these 3 units before I ship they will go out early weds morning.


At r00t$  I need your name to ship it to you.  I have to leave in 20 minutes to get the orders out today.

I with to ups store so r00t$ will ship on weds not today

just jmumich will ship today.





HagssFin
biffa
r00t$

will ship Wednesday

Ok, nice to hear! Again, thanks for doing this Phil!

I am in the process of testing your unit .
I swapped the stock fan with the sanyo ace fan.

The rasp pi works
the little adapter dongle works.
here it is mining

an alt coin PPC

note dna is your serial number
three temps are good
first is the inside control card it should not exceed 45c it is way under that
second is  one board it should stay under 70 c well under
third is second board and it is well under 70c
I am under clock via freq
I used freq 250
I used fan at 22
I have fan rpm under 3000 pretty quiet
lastly  volts are 12.2 this is the safe high number.


https://i.imgur.com/5VyHGaX.png

Just got a call from one of the gals in the office from the apt. it seams a "rather heavy package" was just dropped off for me.  ;D

 Thanks again Phil you rock!  :)

The only snag is the office will be closed by the time I get off work so I have to wait till the morning to go get it.

Okay, nice! Just got today for a reasonable price a used PSU, Silverstone Strider Gold Evolution 1200W ready to hook up with A6

Since you are in Finland I want to be sure it works.  It will get packed tonight and shipped tomorrow.
I will go online to double check that psu that you mention to be sure it works.  well for this unit.

Ok, thanks.  Don't worry, I'm an electrician  ;)

It's quite reliable brand PSU with nice output of 1200W (1300w peak), one 12V rail.

I checked Avalon A6 specs here: https://ehash.com/product/avalon6-v6-0/

oh one rail then it will work.

I just finished the full power test  doing BTC

I am not in the right spot to send a screen shot but your gear all passes.

so I am packing it up for you.

The new better replacement sanyo ace fan is  installed I will give the stock fan along with all parts of the kit.

I will bring to post office tomorrow and mail it.

now to test biffa's gear. as he is U.K.

Mine was dropped off just before I left for the morning.  Unfortunately it looks like my box took quite a hit in transit, luckily it's double boxed with lots of space in between filled with peanuts.

http://i66.tinypic.com/ejirnt.jpg

I unpacked everything and the miner and the pi seem to be undamaged, I will know for sure tonight when I set them up to test.  I have two questions:

1) Are there set up instructions anywhere for this unit?  I'm sure they're easy to find, I just haven't had time to search.

2) Could I buy one of those fans from you, Phil?

Thanks again!

no you can not buy a fan it is free to all in this buy except the hosted ones.

you can pay me 7 bucks to ship it to you via usps priority mail.


support thread is:

 https://bitcointalk.org/index.php?topic=1257327.0


@ biffa  I am testing 1st unit

so far it looks to be passing.

  both usb cables
 the small dongle
the rasp pi
the four pin wire all work
i left in stock fan so rpms are higher
short time test I will do a long time test

https://i.imgur.com/3012xKh.png


unit works well  everything passed over 1 hour at freq 500 and fans set at 35
                                              https://i.imgur.com/qfAjMoi.png

second unit is testing for biffa


https://i.imgur.com/eJgobPv.png

I just got mine. UPS did its usual job, no major damages to the shipping box, nothing got broken inside. After unboxing, I noticed somethings have changed since my last purchase. The dongle thingiemajigie is different, it's not as elongated, seems more solid, sturdier, the 4pin cable is shorter, a lot shorter but thicker and sturdier, the Raspberry Pi is encased in black not white. I can't see to find the ip address of the RPi, is this not dhcp?

Anyways, I love the Avalon 6, they're much better made than its competition. Bitmain S7 maybe a best selling but that doesn't make it a better miner, they're shoddily made. To me, Avalon 6 is a steak, Bitmain S7 is a McDonald hamburger, I mean that, in terms of build quality.

every rasp pi from this order found an ip  .  i used my router to locate them.

 the dongle is different. it is better built. like you said.

when I plug in the rasp pi

I searched for it with a mac  ip search program found it and called it up
see the first screen on the left.
just hit enter password is empty
https://i.imgur.com/HvEmHTU.png

then click advanced gui and up pops this 

https://i.imgur.com/dIZ3JMw.png

^^^^^^^^^^^^^^^^^
Everything's good, philip. Found ip address and was able to configure it.

Thanks for your good work!

excellent  glad to hear the news.

I posted to that thread, https://bitcointalk.org/index.php?topic=1257327.msg14212342#msg14212342, I am having issues with my A6, it appears to be restarting hashing every couple minutes.  Thanks in advance for the help.

@r00t$  Shipped via ups ground
Due Monday

@biffa
Shipped via usps priority express.
I owe a postage refund to you.
I want to do a rant on the U.S. Post office.
But the simple explanation is I was unable to send it global express.
Even though the website said the two closest post offices to my home would let me sent it global express the first post office said we do not have any forms.  They have not been shipped to us.
So I drove the the second post office and while they have forms the computer system said sorry only
Priority express for tue.
At this point I said okay. It was about 90 used cheaper.
It is very well packed and has been fully tested.

@
Hagssfin

Yours is sent priority express should arrive on weds.

I reshipped all packages sent to me
Jmumich FL 2 UNITS    UPS
R00t$     IL 1 UNIT      UPS

Biffa     U.K.  2 UNITS USPS
Hagssfin FINLAND 1 UNIT USPS


And block_c is drop shipping to tlhiwli on Friday .

I need to get some parts for home repair so I will get back later today for sending tracking numbers.


 TRACKING HAS BEEN SENT TO EVERYONE.

phil please keep the refund for your trouble.

^^^^^^^^^^^^^^^^^^^^^^^^
My faith in humanity has been fully restored.

Kudos to philip and biffa.

Totally agree with you! There is still some really nice person in the community! Cheers for Phil and Biffa  ;D

@ biffa
@valkir
@kilo17
@sidehack
@notlist3d
@kano
@-ck
@jonnybravo
@herbpean
@haggsfin
@generalt
@Yan of block_C

and at least 20 or 30 others everyone of them has been a good person to deal with.





@Josh of BFL
@Josh of GAW

two of the worst ever.

And for some good news diff looks to be about 4%

this means from feb 19 to march 30  diff will be pretty flat   about a 162 avg.



If we go flat 1 more jump around march 30 to apr 12   maybe we do 53 days at 162 avg diff

I'd have to agree some good people in this group buy and past group buys by Phil.  I didn't even purchase anything in this discussion but still read it!

thanks kipper01

okay today's updates.

tlhIlwI _ is on the truck for today a drop ship  let me know if you want a Sanyo Ace fan ---- 1 in transit


HagssFin  should get to finland next week has  Sanyo Ace fan pre installed------------------  1 in transit

biffa  should be dropped off in U.K. on tues has 2 Sanyo Ace fans that you can install ------  2  in transit

r00t$ due Monday in IL USA has 1 sanyo Ace fan that you can install------------------------   1 in transit



jmumich was dropped off today 2 units has 2 sanyo ace fans that you can install ---           2 delivered

jonnybravo0311 has two mining in a hosting site no sanyo ace fans --------------------        2 delivered

talks_cheep was delivered  let me know if you want me to mail an sanyo ace fan ---------   1 delivered

pikachuy was  drop shipped and delivered I sent a sanyo ace fan ---------------------------  1 delivered

philipma1957 was delivered I installed a sanyo ace fan --------------------------------------   1 delivered

mikestang was drop shipped and  delivered I sent a sanyo ace fan -------------------------   1 delivered
 
Kuulani      was drop shipped and delivered I sent a sanyo ace fan -----------------------     1 delivered



So if talks_cheep and tlhIlwi want new  sanyo ace fans  please contact me  I can mail in a padded flat rate for 7 dollars

fan is free.

these are the fans.

http://www.amazon.com/gp/product/B00YOC80IO?

so 14 purchased 9 delivered and 5 in route.



I am going to ask  kilo17 if we can do a new group buy.
I will not collect coins until the in route have arrived. 
translation maybe I collect on tues or weds. the 22/23 of march

So those that missed this get you coins together.

check here to see if kilo17 or I post.

dam you philipma1957. I told myself I wasn't going to buy anymore hardware till the 1/2ing or at least till sidehack produces his hardware but these group buys are hard to pass up.

Ugg. I cave. ill be watching this subforum for the next buy. plus avalons seem to have blocks raining down on them for kanos pool and I want to be in on that acclaim list..lol

I think I am up to five more wanted/ asked for.

When kilo17 gets back to me I will do a new one.

I also am still waiting on shipping on 4 units

R00t$ 1

biffa 2

HagssFIN 1

Wow... I have a winner!  The Avalon 6 that arrived today easily hits 3980GH at 12.2V at the supply (only 12.1V in the UI).  I'm actually a little afraid of it being so far on the high side and I'm considering turning it down!

As for the next buy-- I'm going to pass.  I'm done buying hardware until the halving.  I'm probably overspent on hardware as it is.

@philipma, I don't need a Sanyo Denki Ace fan from you, I have my own stashes  ;D

I'd need to replace 2 more SP20's but I'm going to wait a little bit at this time.

another group buy  ;D damn phil! Could be interested  :P

 not official
 not started
 but I think we are up to 6 units.

I have a really busy 5 to 9 days in front of me.
and I may get a 10 inch snow storm.


plus kilo17 has not got back to me with any pricing info.

So it is all very much a maybe for right now.

I received the fan and installed it, worked as advertised.  Thanks again!

How much do you want to send two fans instead of one (one for this A6 and another for the A6 from the previous group buy)? 

I wasn't going to bother with fan swaps since I have them in the garage right now where the noise doesn't bother me, but I may still be mining with them indoors this winter and $7 really is impossible to beat.

Let me figure what it cost me to send to TN

region flat rate to you is 9 bucks for 2   so send 9 usd to

1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


https://blockchain.info/address/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


I will mail on monday.


I lose track of group buys.

 so did your first fan have a delta label  and your second fan  was a black no name?


or did you get 2 black no name fans?

The delta fan is a good fan --------- came with the first group buy-- if you have this leave it alone



 the sanyo ace is close to it --------my replacement for the second and fourth group buy

 the black no name is loud and not that good -----came with the second and fourth group buy.

 


Note the third group buy was never done=  due to crazy diff jumps

Please do another group of avalons!!

I'm furious I missed this one.

The one regret i have with these is my particular unit will only perform to spec if feeding it a platinum rated EVGA and believe me I used 2 Corsair AXi's both 1200 and 1500 versions neither seemed to ever consistently push those all important 12.v

If I power my A6 with anything other than this EVGA 1200 Platinum it usually starts strong and by 4 to 6 hours in it's dropped down to 11.8v and by 10hours...forget it.

It's down to 11.7 or 11.6 and I'm avg 2990Gh/s it's weird.

I guess it might be due to my inability to provide it with a 220 outlet?

Whatever the convenience of the 4 PCI-Es and the dramatic noise level difference are really appealing in comparison to my pair of S7s that squeal like Victoria Azarenka in a 3rd set tie break.

Honestly I can hear them half way across my house.

Phillipa please pm me if you get the go ahead from your contact for another round.

Thanks in advance ;-)

MichaelC

I am waiting for pricing info from kilo17 and yan.

I also have

r00t$ gear due to him on Mon-------------- 1 unit IL
biffa 's gear due to him on tue-------------- 2 unit's U.K.
hagssFin's gear due to him this week ------ 1 unit Finland

 

So I would not start until tues  so hold your funds  figure close to same pricing 650 maybe less.

Thanks Phil just got the Fan in the mail. ;D Wow that thing was packed good. 4 layers of padded envelopes and a small box, Awsome.

good glad you got it.

Posti (Finnish postal service) has received my shipment and it is at the customs in Helsinki. I'll make the customs clearance as soon as Posti  gives me the arrival ID.
I'm guessing that I'll get it in Tuesday

good it is always a worry on overseas shipping  this is good news.


on the same subject biffa's should come on tues.

you rasp pi has a pool and a password
as does biffa's  so when you guys get them the rasp pi should find an ip address and start to mine for me .

so I am sending pm's to both of you  .

What is the story on next group buy?

Kilo17 sent me a pm and it reads that he will talk to Yan and let me know today.


As for last group buy


r00t$ ----  his is on the truck and out for delivery.

biffa ---------  customs clearance is complete in U.K.


HagssFIN ---  has cleared customs in Finland

I'm still waiting for Posti to send me the arrival ID needed for that customs clearance, which I can do online at www.tulli.fi .

okay r00t$ has his marked delivered..


biffa

HagssFIN

 are both on the way

Do you know about the next group buy yet?

No I don't I have yet to get a new price.
I wonder if the 602 price for the s-7 has caused Yan to not be able to compete with it.
I would think he need to go under 600 like 550. They may not want to sell that low.


Waiting on :

biffa he needs to go to post office:

March 22, 2016 , 5:44 am
Payment of charges - Item being held, addressee being notified
UNITED KINGDOM
Your item could not be delivered on March 22, 2016 at 5:44 am in UNITED KINGDOM due to payment of charges. It is being held while the addressee is notified.
March 22, 2016 , 1:01 am
Arrival at Post Office
UNITED KINGDOM

HagssFIN   seems his is stalled somewhere in Finland

March 19, 2016 , 1:02 pm
Customs Clearance
FINLAND
Your item is being processed by customs in FINLAND at 1:02 pm on March 19, 2016.
March 19, 2016 , 12:59 pm
Processed Through Facility
FINLAND


All other 11 units are working and delivered.

Lastly I have a pair of fans to ship to tlhIlwI

 They are packed with a purchased label I hope to get them to the post office today.  Maybe Weds

It is slowly getting closer to me  :)
I made the customs clearance and it is now successfully passed through the customs.

This event was about an 1.5h ago, time here is now 14:20.

Good with luck yours and biffa's will arrive today.

Very interested in what Kilo17 ad Yan have to say. I am more interested in the efficiency along with the quietness for home mining. Doesn't hurt that I mine with Kano and it seems like the Avalons work well on that pool! Hopefully we hear something soon. Thank you Phil for getting this together!

I would think that if anyone ran one of these A6 miners, especially with a new fan, and compared the (lack of) heat and noise that come off it versus an S7 (or even an S5!) they would not think twice about buying the Avalon 6 over the S7.

As to noise, with the new fan I cannot hear the miner in most rooms in my house, it is very quiet.  Quieter than my S5 or S3.  For the past several days I have seen 3.3TH with ~985 watts at the wall, very nice.

What's your frequency setting at? 400?

Default on the Avalon 6, at least how it showed up to me from Block C, was 500 freq and I have not changed it.  I set fan min. to 40.  I am honestly shocked at how quiet and cool it is compared to bitmain products, and how it uses less watts at the wall than expected.

The Avalon 6 gets .3 watts at the wall with a plat psu.

So I am pretty happy with that number.

The batch 8 to batch 13 s-7 do about .31 watts at the wall with a plat psu

The old batch 1 to 7 can do as good as .239 watts at the wall with a plat psu.

But I only have one of them a batch 2.

For quite a while I didn't know what the big deal was with minimum fan setting that is frequently discussed.  On the firmware that came from BlockC mine ran fine with the default value of 20 without any issues at all.  That said, I recently updated the firmware on the rPi and now I see what the big deal about the minimum setting of 40 is all about.

The newer firmware version has a lower temperature target of 68C instead of the 75C target that the November BlockC firmware has.  With the new 68C target the fan rather quickly wants to spin up to a higher RPM to cool more but it doesn't get to the necessary RPM before the hash rate starts throttling.  Once that happens my miners drop from 3800 to 3200 and the fan goes back down.  Rinse and repeat.  Setting the minimum fan to 40 fixes the issue and everything stays in the 3800 to 3900 range where it belongs.  Everything just works-- no winding up and down and/or dropping hash rates.

I've also observed that for some reason the fan speed appears to affect the voltage reading in the UI (on my revision 2 miners anyway).  When the fan was spinning at a low RPM (<40) on the old firmware the reading was always high (12.10V-12.15V on the multimeter = 12.2V in the UI).  With a minimum fan of 40, the voltage in the UI perfectly tracks what my multimeter says (12.0V=12.0V, 12.1V=12.1V, 12.2V=12.2V).  

Overall these A6s are just plain boring (and that is a good thing).  They run perfectly steady at the same hash rate for weeks without touching a thing.  I'm so used to my SP20s where I was always tweaking things and grabbing the hair dryer whenever one failed to restart after changing a setting (or during one of their own random resets).  The A6s are just too easy to maintain (like I said-- boring)!

You guys are just making me more and more jealous that I don't have one yet!

I have 3 S7's and we had to host them because of the heat and noise. Looking forward to a new "boring" miner  :D

still waiting on a new price.

I will shoot kilo17 a reminder pm

My new Avalon 6 started acting up since yesterday. Hashrate goes down and it starts up again, looks like it's cycling from full hash to no hash and repeats. At the pool, my hash rate looks like regular waves, instead of a straight line. How do you troubleshoot it? Currently, I'm running it at frequency 400, corsair rm1000 psu.

Sorry to hear that, talks_cheep   :-\
Any error log?
How are the temps, 12V input?


I got the Avalon 6 today in perfect condition.

It's a perfect add to my setup, I'm now mining with total of 14TH/s.  :)

I'm really pleased with this group buy and that SANYO fan was a real cherry on the cake!

Thanks a lot, Phil!

Here's a pic of it next to Ant S2:
https://i.imgur.com/BkFgR2g.jpg

Nice, but you should spin it 180* so that it has room to vent the exhaust air out and not right into a wall.

yeah they like to breath can't do much with air restriction

Is 1000w enough? Perhaps the psu is causing the wave. Have you tried a different psu like 1200 or 1300watt?

I partly agree with you.
There is a decent distance from the wall, even though not a great one.
I have tried to use that Ant S2 another way but results were not that great.

All temps are under control.

go back to freq 500 fans at 40 make sure air flow has no restrictions.

examine all the rm1000 cables make sure they are tight and not melted.

this gear is very voltage sensitive.
but freq settings other then 500 can do truly weird shit.

my guess for you is go with a freq setting. 500 fan 40

next the three temps   are like 38 70 70   the first number is the inside controller when it gets  to 44 or 45 it does a reset.

check that number see how close it gets to 44 or 45.

I do not think a 1000w psu is enough for an A6 (although I believe the A6 with downclock itself based on available voltage), mine regularly sees 1000w at the wall.  You don't want your psu % usage to be more than it's efficiency rating, i.e. a gold psu should only use 80% of it's rated power at max. continuous load, at least that's how I've always operated.

Otherwise, the "hash in waves" phenomena is exactly what mine was doing when I had its exhaust flow too restricted.

Customs and VAT paid on mine tonight, had to wait to get a letter in the post from ye ole antiquated poste office over here, then I could pay it online.

Won't get it till end of next week now, as its public holidays here till Tuesday. Not your fault though Phil, so don't hold up the next group buy on my behalf, you're all good to go imho.

yeah I figured there was a delay. 

kilo17 sent me a pm he is going to get  price for the next group buy and give it to me late tonight.

So when he does I will open the next one  in the morning and then close it out on Friday.
Its a plan. I am  hoping to do it that way.

i assume you mean next friday. since tomorrow is friday.. lol

Group buy closes out on Good Friday... that's a good omen!  ;D

Thanks to all the good points raised by y'all. After about 12 hours of hashrate going back and forth, it had settled down around 3200+ GHs as was expected for freq 400. I just replaced my corsair rm1000 with two hp server psu's, each rated at 800w @100v, should be more than enough for an A6. Yes, it's an overkill but I had the server psu's laying around doing nothing. Per your suggestion, I'm setting at freq 500 and fan 40. does it matter I have Sanyo Denki Ace fan? Anyways, I'm setting the fan at 40 no matter what fan, need clarification from more knowledgeable member.s

I use two 850w gold rated OCZ psus for mine because that's what I happened to already have on hand.  Overkill like you, but better than not enough wattage as the psus will run more efficiently at lower load.

I have the Sanyo fan, too, and am using 40 for fan.

Did we ever hear the price on the new group buy?

Not yet, but hopefully soon.

I'm interested in 1 avalon 6.  Can I power it with the EVGA 1300w PSU that I have?

Yeah. I'm running mine just fine with Silverstone Strider Gold Evolution 1200W

   kilo17 told me he was going to give me details today.


 I guess he got too busy ,  he has a day job that can be demanding.  Possibly holidays not sure.


I don't want to send him endless pm's asking for new pricing.

Hopefully he will get back to me. The gear has arrived and works.


also  either fan stock or sanyo ace can be set to 40 speed.

they move air almost the same but the stock fan is faster rpm and really loud.

I received my fans today.  Thanks!  They will come in handy in the fall when I bring the miners back indoors.

Thank you Phil!

new group buy link:


https://bitcointalk.org/index.php?topic=1411475.new#new



I am locking this one up.

price for new is 600  plus shipping costs.

which varies.  from 15 to 30 or so in the lower 48 states.

There is a problem with my miner, it melted a pci-e cable and I have no idea why, please assist. :(

https://bitcointalk.org/index.php?topic=1257327.msg14328111#msg14328111

done I sent some info on that thread.