New avalon6 group buy interest thread. 650 usd Closed

[tlhIlwI]

So if talks_cheep and tlhIlwi want new  sanyo ace fans  please contact me  I can mail in a padded flat rate for 7 dollars

fan is free.

these are the fans.

http://www.amazon.com/gp/product/B00YOC80IO?

How much do you want to send two fans instead of one (one for this A6 and another for the A6 from the previous group buy)? 

I wasn't going to bother with fan swaps since I have them in the garage right now where the noise doesn't bother me, but I may still be mining with them indoors this winter and $7 really is impossible to beat.

[philipma1957]

So if talks_cheep and tlhIlwi want new  sanyo ace fans  please contact me  I can mail in a padded flat rate for 7 dollars

fan is free.

these are the fans.

http://www.amazon.com/gp/product/B00YOC80IO?

How much do you want to send two fans instead of one (one for this A6 and another for the A6 from the previous group buy)?  

I wasn't going to bother with fan swaps since I have them in the garage right now where the noise doesn't bother me, but I may still be mining with them indoors this winter and $7 really is impossible to beat.

Let me figure what it cost me to send to TN

region flat rate to you is 9 bucks for 2   so send 9 usd to

1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


https://blockchain.info/address/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


I will mail on monday.


I lose track of group buys.

 so did your first fan have a delta label  and your second fan  was a black no name?


or did you get 2 black no name fans?

The delta fan is a good fan --------- came with the first group buy-- if you have this leave it alone



 the sanyo ace is close to it --------my replacement for the second and fourth group buy

 the black no name is loud and not that good -----came with the second and fourth group buy.

 


Note the third group buy was never done=  due to crazy diff jumps

[mc162BCT]

Please do another group of avalons!!

I'm furious I missed this one.

The one regret i have with these is my particular unit will only perform to spec if feeding it a platinum rated EVGA and believe me I used 2 Corsair AXi's both 1200 and 1500 versions neither seemed to ever consistently push those all important 12.v

If I power my A6 with anything other than this EVGA 1200 Platinum it usually starts strong and by 4 to 6 hours in it's dropped down to 11.8v and by 10hours...forget it.

It's down to 11.7 or 11.6 and I'm avg 2990Gh/s it's weird.

I guess it might be due to my inability to provide it with a 220 outlet?

Whatever the convenience of the 4 PCI-Es and the dramatic noise level difference are really appealing in comparison to my pair of S7s that squeal like Victoria Azarenka in a 3rd set tie break.

Honestly I can hear them half way across my house.

Phillipa please pm me if you get the go ahead from your contact for another round.

Thanks in advance ;-)

MichaelC

[philipma1957]

Please do another group of avalons!!

I'm furious I missed this one.

The one regret i have with these is my particular unit will only perform to spec if feeding it a platinum rated EVGA and believe me I used 2 Corsair AXi's both 1200 and 1500 versions neither seemed to ever consistently push those all important 12.v

If I power my A6 with anything other than this EVGA 1200 Platinum it usually starts strong and by 4 to 6 hours in it's dropped down to 11.8v and by 10hours...forget it.

It's down to 11.7 or 11.6 and I'm avg 2990Gh/s it's weird.

I guess it might be due to my inability to provide it with a 220 outlet?

Whatever the convenience of the 4 PCI-Es and the dramatic noise level difference are really appealing in comparison to my pair of S7s that squeal like Victoria Azarenka in a 3rd set tie break.

Honestly I can hear them half way across my house.

Phillipa please pm me if you get the go ahead from your contact for another round.

Thanks in advance ;-)

MichaelC

I am waiting for pricing info from kilo17 and yan.

I also have

r00t$ gear due to him on Mon-------------- 1 unit IL
biffa 's gear due to him on tue-------------- 2 unit's U.K.
hagssFin's gear due to him this week ------ 1 unit Finland

 

So I would not start until tues  so hold your funds  figure close to same pricing 650 maybe less.

[Kuulani]

Thanks Phil just got the Fan in the mail. Wow that thing was packed good. 4 layers of padded envelopes and a small box, Awsome.

[philipma1957]

Thanks Phil just got the Fan in the mail. Wow that thing was packed good. 4 layers of padded envelopes and a small box, Awsome.

good glad you got it.

[HagssFIN]

Please do another group of avalons!!

I'm furious I missed this one.

The one regret i have with these is my particular unit will only perform to spec if feeding it a platinum rated EVGA and believe me I used 2 Corsair AXi's both 1200 and 1500 versions neither seemed to ever consistently push those all important 12.v

If I power my A6 with anything other than this EVGA 1200 Platinum it usually starts strong and by 4 to 6 hours in it's dropped down to 11.8v and by 10hours...forget it.

It's down to 11.7 or 11.6 and I'm avg 2990Gh/s it's weird.

I guess it might be due to my inability to provide it with a 220 outlet?

Whatever the convenience of the 4 PCI-Es and the dramatic noise level difference are really appealing in comparison to my pair of S7s that squeal like Victoria Azarenka in a 3rd set tie break.

Honestly I can hear them half way across my house.

Phillipa please pm me if you get the go ahead from your contact for another round.

Thanks in advance ;-)

MichaelC

I am waiting for pricing info from kilo17 and yan.

I also have

r00t$ gear due to him on Mon-------------- 1 unit IL
biffa 's gear due to him on tue-------------- 2 unit's U.K.
hagssFin's gear due to him this week ------ 1 unit Finland

 

So I would not start until tues  so hold your funds  figure close to same pricing 650 maybe less.

Posti (Finnish postal service) has received my shipment and it is at the customs in Helsinki. I'll make the customs clearance as soon as Posti  gives me the arrival ID.
I'm guessing that I'll get it in Tuesday

[philipma1957]

Please do another group of avalons!!

I'm furious I missed this one.

The one regret i have with these is my particular unit will only perform to spec if feeding it a platinum rated EVGA and believe me I used 2 Corsair AXi's both 1200 and 1500 versions neither seemed to ever consistently push those all important 12.v

If I power my A6 with anything other than this EVGA 1200 Platinum it usually starts strong and by 4 to 6 hours in it's dropped down to 11.8v and by 10hours...forget it.

It's down to 11.7 or 11.6 and I'm avg 2990Gh/s it's weird.

I guess it might be due to my inability to provide it with a 220 outlet?

Whatever the convenience of the 4 PCI-Es and the dramatic noise level difference are really appealing in comparison to my pair of S7s that squeal like Victoria Azarenka in a 3rd set tie break.

Honestly I can hear them half way across my house.

Phillipa please pm me if you get the go ahead from your contact for another round.

Thanks in advance ;-)

MichaelC

I am waiting for pricing info from kilo17 and yan.

I also have

r00t$ gear due to him on Mon-------------- 1 unit IL
biffa 's gear due to him on tue-------------- 2 unit's U.K.
hagssFin's gear due to him this week ------ 1 unit Finland

 

So I would not start until tues  so hold your funds  figure close to same pricing 650 maybe less.

Posti (Finnish postal service) has received my shipment and it is at the customs in Helsinki. I'll make the customs clearance as soon as Posti  gives me the arrival ID.
I'm guessing that I'll get it in Tuesday

good it is always a worry on overseas shipping  this is good news.


on the same subject biffa's should come on tues.

you rasp pi has a pool and a password
as does biffa's  so when you guys get them the rasp pi should find an ip address and start to mine for me .

so I am sending pm's to both of you  .

[TheYankeesWin!]

What is the story on next group buy?

[philipma1957]

What is the story on next group buy?

Kilo17 sent me a pm and it reads that he will talk to Yan and let me know today.


As for last group buy


r00t$ ----  his is on the truck and out for delivery.

biffa ---------  customs clearance is complete in U.K.


HagssFIN ---  has cleared customs in Finland

[HagssFIN]

...

HagssFIN ---  has cleared customs in Finland

I'm still waiting for Posti to send me the arrival ID needed for that customs clearance, which I can do online at www.tulli.fi .

[philipma1957]

okay r00t$ has his marked delivered..


biffa

HagssFIN

 are both on the way

[TheYankeesWin!]

Do you know about the next group buy yet?

[philipma1957]

Do you know about the next group buy yet?

No I don't I have yet to get a new price.
I wonder if the 602 price for the s-7 has caused Yan to not be able to compete with it.
I would think he need to go under 600 like 550. They may not want to sell that low.


Waiting on :

biffa he needs to go to post office:

March 22, 2016 , 5:44 am
Payment of charges - Item being held, addressee being notified
UNITED KINGDOM
Your item could not be delivered on March 22, 2016 at 5:44 am in UNITED KINGDOM due to payment of charges. It is being held while the addressee is notified.
March 22, 2016 , 1:01 am
Arrival at Post Office
UNITED KINGDOM

HagssFIN   seems his is stalled somewhere in Finland

March 19, 2016 , 1:02 pm
Customs Clearance
FINLAND
Your item is being processed by customs in FINLAND at 1:02 pm on March 19, 2016.
March 19, 2016 , 12:59 pm
Processed Through Facility
FINLAND


All other 11 units are working and delivered.

Lastly I have a pair of fans to ship to tlhIlwI

 They are packed with a purchased label I hope to get them to the post office today.  Maybe Weds

[HagssFIN]

It is slowly getting closer to me  
I made the customs clearance and it is now successfully passed through the customs.

Item events
Item has been registered. 22.03.2016 12:49 TULLIPOSTI / Vantaa 01530 01534

This event was about an 1.5h ago, time here is now 14:20.

[philipma1957]

It is slowly getting closer to me  
I made the customs clearance and it is now successfully passed through the customs.

Item events
Item has been registered. 22.03.2016 12:49 TULLIPOSTI / Vantaa 01530 01534

This event was about an 1.5h ago, time here is now 14:20.

Good with luck yours and biffa's will arrive today.

[utbeauchamp]

Very interested in what Kilo17 ad Yan have to say. I am more interested in the efficiency along with the quietness for home mining. Doesn't hurt that I mine with Kano and it seems like the Avalons work well on that pool! Hopefully we hear something soon. Thank you Phil for getting this together!

[Mikestang]

I wonder if the 602 price for the s-7 has caused Yan to not be able to compete with it.

I am more interested in the efficiency along with the quietness for home mining.

I would think that if anyone ran one of these A6 miners, especially with a new fan, and compared the (lack of) heat and noise that come off it versus an S7 (or even an S5!) they would not think twice about buying the Avalon 6 over the S7.

As to noise, with the new fan I cannot hear the miner in most rooms in my house, it is very quiet.  Quieter than my S5 or S3.  For the past several days I have seen 3.3TH with ~985 watts at the wall, very nice.

[talks_cheep]

I wonder if the 602 price for the s-7 has caused Yan to not be able to compete with it.

I am more interested in the efficiency along with the quietness for home mining.

I would think that if anyone ran one of these A6 miners, especially with a new fan, and compared the (lack of) heat and noise that come off it versus an S7 (or even and S5!) they would not think twice about buying the Avalon 6 over the S7.

As to noise, with the new fan I cannot hear the miner in most rooms in my house, it is very quiet.  Quieter than my S5 or S3.  For the past several days I have seen 3.3TH with ~985 watts at the wall, very nice.

What's your frequency setting at? 400?

[Mikestang]

What's your frequency setting at? 400?

Default on the Avalon 6, at least how it showed up to me from Block C, was 500 freq and I have not changed it.  I set fan min. to 40.  I am honestly shocked at how quiet and cool it is compared to bitmain products, and how it uses less watts at the wall than expected.