philipma1957 (OP)
Legendary
Offline
Activity: 4228
Merit: 8386
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 22, 2016, 11:44:27 PM |
|
What's your frequency setting at? 400?
Default on the Avalon 6, at least how it showed up to me from Block C, was 500 freq and I have not changed it. I set fan min. to 40. I am honestly shocked at how quiet and cool it is compared to bitmain products, and how it uses less watts at the wall than expected. The Avalon 6 gets .3 watts at the wall with a plat psu. So I am pretty happy with that number. The batch 8 to batch 13 s-7 do about .31 watts at the wall with a plat psu The old batch 1 to 7 can do as good as .239 watts at the wall with a plat psu. But I only have one of them a batch 2.
|
|
|
|
tlhIlwI
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 12:39:55 AM |
|
For quite a while I didn't know what the big deal was with minimum fan setting that is frequently discussed. On the firmware that came from BlockC mine ran fine with the default value of 20 without any issues at all. That said, I recently updated the firmware on the rPi and now I see what the big deal about the minimum setting of 40 is all about.
The newer firmware version has a lower temperature target of 68C instead of the 75C target that the November BlockC firmware has. With the new 68C target the fan rather quickly wants to spin up to a higher RPM to cool more but it doesn't get to the necessary RPM before the hash rate starts throttling. Once that happens my miners drop from 3800 to 3200 and the fan goes back down. Rinse and repeat. Setting the minimum fan to 40 fixes the issue and everything stays in the 3800 to 3900 range where it belongs. Everything just works-- no winding up and down and/or dropping hash rates.
I've also observed that for some reason the fan speed appears to affect the voltage reading in the UI (on my revision 2 miners anyway). When the fan was spinning at a low RPM (<40) on the old firmware the reading was always high (12.10V-12.15V on the multimeter = 12.2V in the UI). With a minimum fan of 40, the voltage in the UI perfectly tracks what my multimeter says (12.0V=12.0V, 12.1V=12.1V, 12.2V=12.2V).
Overall these A6s are just plain boring (and that is a good thing). They run perfectly steady at the same hash rate for weeks without touching a thing. I'm so used to my SP20s where I was always tweaking things and grabbing the hair dryer whenever one failed to restart after changing a setting (or during one of their own random resets). The A6s are just too easy to maintain (like I said-- boring)!
|
|
|
|
utbeauchamp
Newbie
Offline
Activity: 26
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 02:00:42 AM |
|
You guys are just making me more and more jealous that I don't have one yet! I have 3 S7's and we had to host them because of the heat and noise. Looking forward to a new "boring" miner ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4228
Merit: 8386
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 02:12:53 AM |
|
You guys are just making me more and more jealous that I don't have one yet! I have 3 S7's and we had to host them because of the heat and noise. Looking forward to a new "boring" miner ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) still waiting on a new price. I will shoot kilo17 a reminder pm
|
|
|
|
talks_cheep
Legendary
Offline
Activity: 1036
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 03:17:54 PM |
|
My new Avalon 6 started acting up since yesterday. Hashrate goes down and it starts up again, looks like it's cycling from full hash to no hash and repeats. At the pool, my hash rate looks like regular waves, instead of a straight line. How do you troubleshoot it? Currently, I'm running it at frequency 400, corsair rm1000 psu.
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 04:35:17 PM |
|
Sorry to hear that, talks_cheep ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Any error log? How are the temps, 12V input? I got the Avalon 6 today in perfect condition. It's a perfect add to my setup, I'm now mining with total of 14TH/s. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I'm really pleased with this group buy and that SANYO fan was a real cherry on the cake! Thanks a lot, Phil! Here's a pic of it next to Ant S2: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FBkFgR2g.jpg&t=665&c=4vfNkMFl-udi5A)
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 06:56:24 PM |
|
Here's a pic of it next to Ant S2:
Nice, but you should spin it 180* so that it has room to vent the exhaust air out and not right into a wall.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4228
Merit: 8386
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 08:59:11 PM |
|
Here's a pic of it next to Ant S2:
Nice, but you should spin it 180* so that it has room to vent the exhaust air out and not right into a wall. yeah they like to breath can't do much with air restriction
|
|
|
|
Legacy2005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 09:19:02 PM |
|
My new Avalon 6 started acting up since yesterday. Hashrate goes down and it starts up again, looks like it's cycling from full hash to no hash and repeats. At the pool, my hash rate looks like regular waves, instead of a straight line. How do you troubleshoot it? Currently, I'm running it at frequency 400, corsair rm1000 psu.
Is 1000w enough? Perhaps the psu is causing the wave. Have you tried a different psu like 1200 or 1300watt?
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 10:25:06 PM |
|
Here's a pic of it next to Ant S2:
Nice, but you should spin it 180* so that it has room to vent the exhaust air out and not right into a wall. yeah they like to breath can't do much with air restriction I partly agree with you. There is a decent distance from the wall, even though not a great one. I have tried to use that Ant S2 another way but results were not that great. All temps are under control.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4228
Merit: 8386
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 10:41:50 PM |
|
My new Avalon 6 started acting up since yesterday. Hashrate goes down and it starts up again, looks like it's cycling from full hash to no hash and repeats. At the pool, my hash rate looks like regular waves, instead of a straight line. How do you troubleshoot it? Currently, I'm running it at frequency 400, corsair rm1000 psu.
Is 1000w enough? Perhaps the psu is causing the wave. Have you tried a different psu like 1200 or 1300watt? go back to freq 500 fans at 40 make sure air flow has no restrictions. examine all the rm1000 cables make sure they are tight and not melted. this gear is very voltage sensitive. but freq settings other then 500 can do truly weird shit. my guess for you is go with a freq setting. 500 fan 40 next the three temps are like 38 70 70 the first number is the inside controller when it gets to 44 or 45 it does a reset. check that number see how close it gets to 44 or 45.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 11:01:54 PM |
|
Is 1000w enough? Perhaps the psu is causing the wave. Have you tried a different psu like 1200 or 1300watt?
I do not think a 1000w psu is enough for an A6 (although I believe the A6 with downclock itself based on available voltage), mine regularly sees 1000w at the wall. You don't want your psu % usage to be more than it's efficiency rating, i.e. a gold psu should only use 80% of it's rated power at max. continuous load, at least that's how I've always operated. Otherwise, the "hash in waves" phenomena is exactly what mine was doing when I had its exhaust flow too restricted.
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2016, 11:31:17 PM |
|
It is slowly getting closer to me ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I made the customs clearance and it is now successfully passed through the customs. Item events Item has been registered. 22.03.2016 12:49 TULLIPOSTI / Vantaa 01530 01534 This event was about an 1.5h ago, time here is now 14:20. Good with luck yours and biffa's will arrive today. Customs and VAT paid on mine tonight, had to wait to get a letter in the post from ye ole antiquated poste office over here, then I could pay it online. Won't get it till end of next week now, as its public holidays here till Tuesday. Not your fault though Phil, so don't hold up the next group buy on my behalf, you're all good to go imho.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4228
Merit: 8386
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2016, 02:06:41 AM |
|
It is slowly getting closer to me ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I made the customs clearance and it is now successfully passed through the customs. Item events Item has been registered. 22.03.2016 12:49 TULLIPOSTI / Vantaa 01530 01534 This event was about an 1.5h ago, time here is now 14:20. Good with luck yours and biffa's will arrive today. Customs and VAT paid on mine tonight, had to wait to get a letter in the post from ye ole antiquated poste office over here, then I could pay it online. Won't get it till end of next week now, as its public holidays here till Tuesday. Not your fault though Phil, so don't hold up the next group buy on my behalf, you're all good to go imho. yeah I figured there was a delay. kilo17 sent me a pm he is going to get price for the next group buy and give it to me late tonight. So when he does I will open the next one in the morning and then close it out on Friday. Its a plan. I am hoping to do it that way.
|
|
|
|
Legacy2005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2016, 02:01:45 PM |
|
It is slowly getting closer to me ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I made the customs clearance and it is now successfully passed through the customs. Item events Item has been registered. 22.03.2016 12:49 TULLIPOSTI / Vantaa 01530 01534 This event was about an 1.5h ago, time here is now 14:20. Good with luck yours and biffa's will arrive today. Customs and VAT paid on mine tonight, had to wait to get a letter in the post from ye ole antiquated poste office over here, then I could pay it online. Won't get it till end of next week now, as its public holidays here till Tuesday. Not your fault though Phil, so don't hold up the next group buy on my behalf, you're all good to go imho. yeah I figured there was a delay. kilo17 sent me a pm he is going to get price for the next group buy and give it to me late tonight. So when he does I will open the next one in the morning and then close it out on Friday. Its a plan. I am hoping to do it that way. i assume you mean next friday. since tomorrow is friday.. lol
|
|
|
|
utbeauchamp
Newbie
Offline
Activity: 26
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2016, 02:02:57 PM |
|
Group buy closes out on Good Friday... that's a good omen! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
talks_cheep
Legendary
Offline
Activity: 1036
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2016, 06:46:09 PM |
|
My new Avalon 6 started acting up since yesterday. Hashrate goes down and it starts up again, looks like it's cycling from full hash to no hash and repeats. At the pool, my hash rate looks like regular waves, instead of a straight line. How do you troubleshoot it? Currently, I'm running it at frequency 400, corsair rm1000 psu.
Is 1000w enough? Perhaps the psu is causing the wave. Have you tried a different psu like 1200 or 1300watt? go back to freq 500 fans at 40 make sure air flow has no restrictions. examine all the rm1000 cables make sure they are tight and not melted. this gear is very voltage sensitive. but freq settings other then 500 can do truly weird shit. my guess for you is go with a freq setting. 500 fan 40 next the three temps are like 38 70 70 the first number is the inside controller when it gets to 44 or 45 it does a reset. check that number see how close it gets to 44 or 45. Thanks to all the good points raised by y'all. After about 12 hours of hashrate going back and forth, it had settled down around 3200+ GHs as was expected for freq 400. I just replaced my corsair rm1000 with two hp server psu's, each rated at 800w @100v, should be more than enough for an A6. Yes, it's an overkill but I had the server psu's laying around doing nothing. Per your suggestion, I'm setting at freq 500 and fan 40. does it matter I have Sanyo Denki Ace fan? Anyways, I'm setting the fan at 40 no matter what fan, need clarification from more knowledgeable member.s
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2016, 07:26:45 PM |
|
Thanks to all the good points raised by y'all. After about 12 hours of hashrate going back and forth, it had settled down around 3200+ GHs as was expected for freq 400. I just replaced my corsair rm1000 with two hp server psu's, each rated at 800w @100v, should be more than enough for an A6. Yes, it's an overkill but I had the server psu's laying around doing nothing. Per your suggestion, I'm setting at freq 500 and fan 40. does it matter I have Sanyo Denki Ace fan? Anyways, I'm setting the fan at 40 no matter what fan, need clarification from more knowledgeable member.s
I use two 850w gold rated OCZ psus for mine because that's what I happened to already have on hand. Overkill like you, but better than not enough wattage as the psus will run more efficiently at lower load. I have the Sanyo fan, too, and am using 40 for fan.
|
|
|
|
utbeauchamp
Newbie
Offline
Activity: 26
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2016, 07:38:07 PM |
|
yeah I figured there was a delay.
kilo17 sent me a pm he is going to get price for the next group buy and give it to me late tonight.
So when he does I will open the next one in the morning and then close it out on Friday. Its a plan. I am hoping to do it that way.
Did we ever hear the price on the new group buy?
|
|
|
|
in2tactics
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2016, 10:13:15 PM |
|
Did we ever hear the price on the new group buy?
Not yet, but hopefully soon.
|
Current HW: 2x Apollo, 2x Apollo BTC, 2x Apollo II Retired HW: 3x 2PAC, 3x Moonlander 2, 2x AntMiner S7-LN, 5x AntMiner U1, 2x ASICMiner Block Erupter Cube, 4x AntMiner S3, 4x AntMiner S1, GAW Black Widow, and ZeusMiner Thunder X6
|
|
|
|