Bitcoin Forum

23:56:37

help resendwallettransactions


23:56:37

resendwallettransactions

Immediately re-broadcast unconfirmed wallet transactions to all peers.
Note: the wallet code periodically re-broadcasts automatically.
Returns: array of transaction ids that were re-broadcast.

00:28:14

help getdifficulty


00:28:14

getdifficulty

Returns the proof-of-work required difficulty now at the tip of the block chain.

Result:
n.nnn (numeric) The minimum difficulty is defined as 1 and this result is linear relative to that value.
Smaller values indicate harder, larger an easier difficulty and all blocks will have a value < 1.

Examples:
> anoncoin-cli getdifficulty 
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getdifficulty", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:9376/

00:09:03

getchaintips


00:09:04

[
{
"height" : 538504,
"hash" : "0000000000d929ff1592eb4adecb1d1e9d733510a3e984c995be35108903ab7e",
"shad" : "b0201d1fe8e462f6a6ed56090d9974435357bc14d79149065b623a3eba12a266",
"branchlen" : 0,
"status" : "active"
}
]


00:09:06

getdifficulty


00:09:06

0.00000135



00:17:59

getdifficulty


00:17:59

0.00000139

Connected to 127.0.0.1 diff 11.8M without LP as user Cryptoslave
Block: b381edee13ef64ef...  Diff:11.8M Started: [00:13:58]  Best share: 13

 [2016-06-01 00:22:53] Network diff set to 11.5M
 [2016-06-01 00:22:53] New block detected on network
 [2016-06-01 00:23:21] Network diff set to 11.8M
 [2016-06-01 00:23:21] New block detected on network

02:59:18

help getnetworkhashps


02:59:18

getnetworkhashps [blocks] [height]

Returns the estimated network hashes per second, optionally for a given height and based on the last n blocks.

Arguments:
1. blocks (numeric, optional, default='tipfiltersize') Hint: The 'getretargetpid 1' query tells you the tip filters size.
2. height (numeric, optional, default=0) Default to current chain tip, or specify at what height the calculation is to be made.

NOTES: Block spacing is measured, so at least 2 blocks are needed to calculate one spacing interval, the more the better.
Pass in [height] to estimate the network speed at the time when a certain block was mined. Pass in [blocks] to override the # of
blocks used in the calculation, any value < 2 sets the min of 2 blocks. Expect a poor estimate, with so few.

Result:
(numeric) Estimated hashes per second, the calculation made is the chain work proofs (latest - oldest) / time delta.

Examples:
> anoncoin-cli getnetworkhashps 
> anoncoin-cli getnetworkhashps 200 350000
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getnetworkhashps", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:9376/
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getnetworkhashps", "params": [5000,390000] }' -H 'content-type: text/plain;' http://127.0.0.1:9376/

03:15:02

getnetworkhashps


03:15:02

3268971239


03:15:04

getnetworkhashps 21


03:15:04

3268971239


03:15:06

getnetworkhashps 2


03:15:06

393059443


03:15:10

getnetworkhashps 120


03:15:10

4120719633


03:15:16

getnetworkhashps 480


03:15:16

3780644272

15:57:37

getretargetpid


15:57:37

{
"retargetheight" : 546970,
"allowmintime" : 1466256114,
"retargettime" : 1466258267,
"adjustedtime" : 1466258267,
"prevdiff" : "1c0240e1(231)",
"spacingerror" : "+52.7429(210)",
"rateofchange" : "-14.4158(190)",
"integratorheight" : 546969,
"integrationtime" : 172794,
"integratorblocks" : 974,
"proportionterm" : 89.66285966,
"integratorterm" : 167.94450154,
"derivativeterm" : -0.00000000,
"pidoutputtime" : 257.60736120,
"prevdiffx256" : "000000000240e1e32fa7578cbe9d5e32fa7578cbe9d5e32fa7578cbe9d5e32fa",
"hitlimits" : false,
"nextdiffbits" : "1c033add",
"nextdifflog2" : 38.30849247,
"nextdiffx256" : "00000000033add5f3bc530b02247f5f3bc530b02247f5f3bc530b02247f5f3bb",
"tipspacing" : 215.95000000,
"blkspacing" : 87,
"prevshad" : "4d2392a5d6d13d9b5580fabf5f3dc9ea4b246d0400c583f1b1b3e647fd696eaa"
}

16:27:04

getnetworkhashps 120


16:27:04

2877270143


16:28:37

getnetworkhashps 21


16:28:37

2184023236

My hashrate = 100 MH/s = 100000000
getnetworkhashps 120 = 2877270143
Proportion of hashrate = 100000000/2877270143 = 0.035
ANC per day = 2.5 * 480 * 0.035 = 42

  ............
  CXX    libanoncoin_server_a-main.o
main.cpp: In function 'bool LoadBlockIndexDB()':
main.cpp:3109:32: error: 'BlockHashCorrectionMap' has no member named 'reserve'
main.cpp:3177:19: error: 'BlockMap' has no member named 'reserve'
main.cpp: In function 'bool ProcessMessage(CNode*, std::string, CDataStream&)':
main.cpp:4135:18: warning: unused variable 'fFromChanged' [-Wunused-variable]
main.cpp:4659:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
make[2]: *** [libanoncoin_server_a-main.o] Error 1
make[2]: Leaving directory `/root/anoncoin/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/anoncoin/src'
make: *** [all-recursive] Error 1

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install g++ git automake
sudo apt-get install autoconf make libtool pkg-config libqt4-network libqtgui4

cd
git clone https://github.com/Anoncoin/anoncoin.git
cd anoncoin
./autogen.sh
cd depends
make -j`nproc`

dir
cd ..
./configure --prefix=`pwd`/depends/x86_64-unknown-linux-gnu
make -j`nproc`

2016-06-27 22:25:18 URL:http://heanet.dl.sourceforge.net/project/boost/boost/1.57.0/boost_1_57_0.tar.bz2 [60821561/60821561] -> "/home/yo/anoncoin/depends/work/download/boost-1_57_0/boost_1_57_0.tar.bz2.temp" [1]
2016-06-27 22:26:36 URL:https://www.openssl.org/source/openssl-1.0.1j.tar.gz [4432964/4432964] -> "/home/yo/anoncoin/depends/work/download/openssl-1.0.1j/openssl-1.0.1j.tar.gz.temp" [1]
2016-06-27 22:27:30 URL:https://fukuchi.org/works/qrencode//qrencode-3.4.3.tar.bz2 [370709/370709] -> "/home/yo/anoncoin/depends/work/download/qrencode-3.4.3/qrencode-3.4.3.tar.bz2.temp" [1]
2016-06-27 22:28:15 URL:http://heanet.dl.sourceforge.net/project/freetype/freetype2/2.5.3/freetype-2.5.3.tar.bz2 [1703842/1703842] -> "/home/yo/anoncoin/depends/work/download/freetype-2.5.3/freetype-2.5.3.tar.bz2.temp" [1]
2016-06-27 22:28:34 URL:http://tenet.dl.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz [562616/562616] -> "/home/yo/anoncoin/depends/work/download/expat-2.1.0/expat-2.1.0.tar.gz.temp" [1]
2016-06-27 22:28:42 URL:https://dbus.freedesktop.org/releases/dbus/dbus-1.8.6.tar.gz [1861784/1861784] -> "/home/yo/anoncoin/depends/work/download/dbus-1.8.6/dbus-1.8.6.tar.gz.temp" [1]
2016-06-27 22:29:01 URL:https://www.x.org/releases/individual/proto/xproto-7.0.26.tar.bz2 [305321/305321] -> "/home/yo/anoncoin/depends/work/download/xproto-7.0.26/xproto-7.0.26.tar.bz2.temp" [1]
2016-06-27 22:31:02 URL:http://ftp.fau.de/qtproject/archive/qt/4.6/qt-everywhere-opensource-src-4.6.4.tar.gz [160837056/160837056] -> "/home/yo/anoncoin/depends/work/download/qt46-4.6.4/qt-everywhere-opensource-src-4.6.4.tar.gz.temp" [1]
2016-06-27 22:35:02 URL:http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [22842330/22842330] -> "/home/yo/anoncoin/depends/work/download/bdb-4.8.30/db-4.8.30.NC.tar.gz.temp" [1]
2016-06-27 22:35:23 URL:http://miniupnp.free.fr/files/miniupnpc-1.9.20140701.tar.gz [76735/76735] -> "/home/yo/anoncoin/depends/work/download/miniupnpc-1.9.20140701/miniupnpc-1.9.20140701.tar.gz.temp"

If you want to build anoncoind and anoncoin-cli without using the toolchain.

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install g++ git automake
sudo apt-get install autoconf make libtool pkg-config libqt4-network libqtgui4

After the dependencies got installed, download anoncoin and configure the building process.

cd
git clone https://github.com/Anoncoin/anoncoin.git
cd anoncoin
./autogen.sh
./configure

If you encounter any error.

sudo apt-get install libboost-all-dev git libdb++-dev libssl-dev

If you encounter configure: error: libdb_cxx headers missing.

sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev

Now launch the configure again.

./configure

If you want to compile the GUI (anoncoin-qtc). After "make", anoncoin-qtc will be found in src/qt/.

sudo apt-get install libqt4-dev libprotobuf-dev protobuf-compiler
./configure --with-gui=qt4

Now after a succesful configure ending, launch the build.

make -j`nproc`

You now have built src/anoncoind, src/anoncoin-cli and maybe src/qt/anoncoin-qtc.

The executables are quite big because they are built with GCC and you can strip the debug symbols, which reduces the executable size by about 90%.

strip src/anoncoind
strip src/anoncoin-cli
strip src/qt/anoncoin-qtc

Anoncoind and anoncoin-cli will have been created in anoncoin/src folder. To run it the first time, with no previous datadir (if it exists from a previous version please remove everything in ~/.anoncoin but not wallet.dat).

mkdir ~/.anoncoin
cp doc/anoncoin.conf.sample ~/.anoncoin/anoncoin.conf
nano ~/.anoncoin/anoncoin.conf

In anoncoin.conf, change rpcuser, rpcpassword

For clearnet-only comment onlynet=i2p and in i2p.options set enabled=0

For I2P-only uncomment onlynet=i2p and in i2p.options set enabled=1

For I2P and clearnet (mixed mode) comment onlynet=i2p and in i2p.options set enabled=1

For I2P router configuration and settings check https://wiki.anoncoin.net/How_to_setup_your_Anoncoin_wallet#Using_the_command_line_to_generate_a_random_anoncoin_address_and_run_anoncoind_with_I2P

Execute anoncoind and anoncoin-cli

src/anoncoind
src/anoncoin-cli getinfo
src/anoncoin-cli getchaintips

time		blocks	SUM(transactions)	SUM(volume)	AVG(difficulty)	MAX(height)
2016-08-20	36	9	84,3581237793	0,0000212517	565.028
2016-08-18	38	10	142,3270463943	0,0000228184	564.992
2016-08-17	61	4	77,0836935043	0,000024477	564.954
2016-08-16	1	11	27.368,44140625	0,00000107	564.893
2016-08-15	32	4	61,478717804		0,0000165034	564.892
2016-08-14	346	43	762,0881061554	0,0000071297	564.860
2016-08-13	140	16	3.302,6591997147	0,0000095491	564.514
2016-08-12	1	7	112,8434906006	0,00000028	564.374
2016-08-11	21	1	28.502,58984375	0,0000020805	564.373
2016-08-10	218	27	71.414,309014082	0,0000117845	564.352
2016-08-09	1	21	6.126,3051757812	0,00000059	564.134
2016-08-07	34	9	1.208,0912075043	0,0000149368	564.133
2016-08-06	16	0	0			0,0000043375	564.099
2016-08-05	84	11	622,5356903076	0,0000225308	564.083

Month(time)	blocks	SUM(transactions)	SUM(volume)
8	1.143	214	147.934,6117284298
7	10.947	1.693	82.260,2236501966

coin	height	time		difficulty	transactions	volume		mined	spacing
9	565.038	2016-08-30 19:08:31	0,00000903	0	0		2,5	28
9	565.037	2016-08-30 19:08:03	0,00000725	0	0		2,5	24
9	565.036	2016-08-30 19:07:39	0,00000578	0	0		2,5	61
9	565.035	2016-08-30 19:06:38	0,00000457	0	0		2,5	12
9	565.034	2016-08-30 19:06:26	0,00000359	0	0		2,5	35
9	565.033	2016-08-30 19:05:51	0,00000391	0	0		2,5	115
9	565.032	2016-08-30 19:03:56	0,0000023	0	0		2,5	3.353
9	565.031	2016-08-30 18:08:03	0,00000135	1	280,397		2,5	694
9	565.030	2016-08-30 17:56:29	0,0000008	0	0		2,5	175.120
9	565.029	2016-08-28 17:17:49	0,00000047	15	1.969,82	2,88937	684.065
9	565.028	2016-08-20 19:16:44	0,00000064	0	0		2,5	331

Value getdifficulty(const Array& params, bool fHelp)
{
    if (fHelp || params.size() != 0)
        throw runtime_error(
            "getdifficulty\n"
            "\nReturns the proof-of-work required difficulty now at the tip of the block chain.\n"
            "\nResult:\n"
            "n.nnn       (numeric) The minimum difficulty is defined as 1 and this result is linear relative to that value.\n"
            "            Smaller values indicate harder, larger an easier difficulty and all blocks will have a value < 1.\n"
            "\nExamples:\n"
            + HelpExampleCli("getdifficulty", "")
            + HelpExampleRpc("getdifficulty", "")
        );

    LOCK(cs_main);
    return GetDifficulty();
}

(...)

//! Returns the floating point number that represents a multiple of the minimum
//! difficulty that was required, and found within the given block index entries
//! nBits field.  If the block index pointer given is NULL, then we use the active
//! chain tip block index as the one for which this evaluation is made.
//! minimum difficulty = 1.0, and the value goes down when difficulty is harder,
//! and up when the difficulty is easier.
double GetDifficulty(const CBlockIndex* blockindex)
{
    if (blockindex == NULL)
    {
        if (chainActive.Tip() == NULL)
            return 1.0;
        else
            blockindex = chainActive.Tip();
    }
    uint256 uintBlockDiff;
    uintBlockDiff.SetCompact( blockindex->nBits );
    return 1.0 / GetLinearWork( uintBlockDiff, Params().ProofOfWorkLimit( CChainParams::ALGO_SCRYPT ) );
}

spendzeroconfchange=0

Block	   Approx. Time	Transactions	Value Out	Difficulty	Outstanding	Average Age	Chain Age	% CoinDD
675216	2017-05-26 19:59:51	1	1.25	        77.923	        2414975.612	612.28	        1454.06	34.2958% 

http://abe.darkgamex.ch:2751/tx/2d50916ca99e7d3ed33a5e80a3e47b60181d6d7eb5b53fb6384480cda02d9964
http://abe.darkgamex.ch:2751/tx/d5da1f470339d8f80b17e49feb7e20f389c2b1093f82e9ca77c9b9046ffd6c65
http://abe.darkgamex.ch:2751/tx/1041940db6d66d9e90706425f085b88bf46acf2c5c05b0fe9d93a713c1a4bb78
http://abe.darkgamex.ch:2751/tx/5c3008ce6a3b80071c9f0f3d5f8589cf6969333199be51957150907e69cdaaa9


and two outputs:

vout" : [
{
"value" : 572.56977951,
"n" : 0,
"scriptPubKey" : {
"asm" : "OP_DUP OP_HASH160 fa8a2f4de2339284aabc788739409ddb8b4a1f8a OP_EQUALVERIFY OP_CHECKSIG",
"hex" : "76a914fa8a2f4de2339284aabc788739409ddb8b4a1f8a88ac",
"reqSigs" : 1,
"type" : "pubkeyhash",
"addresses" : [
"Aecc7hisPra6vUriAJuQwhWb5EPbFKxo9y"
]
}
},
{
"value" : 0.01000048,
"n" : 1,
"scriptPubKey" : {
"asm" : "OP_DUP OP_HASH160 10aa8eb61e19f659f4f0a637dfa61b95ff673236 OP_EQUALVERIFY OP_CHECKSIG",
"hex" : "76a91410aa8eb61e19f659f4f0a637dfa61b95ff67323688ac",
"reqSigs" : 1,
"type" : "pubkeyhash",
"addresses" : [
"AHHzn7E1jkkJN6DstA64mpXwY7819Eqye4"
]
}