Bitcoin Forum

Etarminer v.1.9 (windows)
Etarminer v.1.8 (linux)
For cuda device only!
---------------------------------

http://etarminer.gradi.com.ua/index_eng.html#download (http://etarminer.gradi.com.ua/index_eng.html#download)

This version is designed for mining ethereum through pool only (dwarfpool,ethermine.org and other)
Only cuda device support! For x64  Win7, Win8, Linux.

Fearures:
   - Dag file is not needed. It is created automatically on the GPU.
   - High speed DAG generation.
   - Fully writing from scratch of mining algorithm that gives the best result in comparison with the standard miner.



Using the Etarminer is free.

The values of local parameters overwrite the values of global!
Use this command line parameter:
-url   Ethereum pool address and port. Only Stratum protocol is supported.
   symblol ":" is a separator between the address and port number.
   Ex, -url http://eth-ru.dwarfpool.com:8008
         
-wrk   Worker name, it is necessary for some pools.
   Ex, -wrk 1

-wlt   Wallet address. Need for dwarfpool for example.
   Ex, -wlt 0xF04f7978AA95be8D6ACa243b7150fe3384946592
         
-eml   Email address. Need for dwarfpool for example.
   Ex, -eml x

-int   Global. The intensity of mining. Use 18(default) for the comfort of the whole system.
   And 19,20 for the GPU more loads.
   Ex, -int 18

-intg     Local. The intensity for gpu specified in the list.
   Ex, -intg g0 18 g1 20 (gpu0 will work with intensity 18, gpu0 will work with intensity 20 remaining gpu
   on global parameter -int or default.   

-wsz   Global. For all the gpu.
   The number of threads per block. Always a multiple of 32. Using the value 64,128(default),256
   Ex, -wsz 128
         
-wszg   Local. The number of threads per unit for gpu specified in the list.
   Ex, -wszg g0 64 g1 128 (gpu0 will work with 64 threads per block, gpu0 will work with 128 threads per block, tremaining gpu
   on global parameter -wsz or default.

-tsmg   Local. Which architecture to customize the kernel the listed gpu. The value of the two numbers.
   By default, the kernel of each gpu receives a pointer to equal its compute capality. T.e. Geforce gtx 1070,
   which has compute capability 6.1, get a pointer 61.
   If for some reason gpu does not start and the error "FATAL ERROR GPU" appears. Set the value -tsmg
   gpu selected to a smaller value. This applies to cards with Pascal architecture.
   Ex, -tsmg g0 53

-slcg   Local. Use only the specified GPU for mining.
   Ex, -slcg g0 g3 use only gpu1 and gpu3 for mining

-ess   Global. Enable / disable the built-in statistics server. The default setting (enable) is equivalent to value -ess 1
   Ex, -ess 0 disables server statistics

-pss   Global. Change the port for the miner server statistics. The default port 10001
   Ex, -pss 8000 Use port 8000 for the statistics server.

-toffg   Local. The temperature above which, the selected GPU will be suspended,
   to reduce the GPU temperature at 15C
   By default, all stop temperature GPU 85C.
   Example, -toffg g0 90

Command line example runs .bat file:

Example for dwarfpool
   Etarminer  -url http://eth-ru.dwarfpool.com:8008 -wlt YOURWALLET -wrk 1 -eml x

Example for coinmine:
   Etarminer  -url http://eth.coinmine.pl:4000 -wlt LOGIN.WORKER -eml password

Example for ethermine:
   Etarminer  -url http://eu1.ethermine.org:4444 -wlt YOURWALLET -wrk 1 -eml x

Example for coinotron:   
   Etarminer  -url http://coinotron.com:3344 -wlt LOGIN.WORKER -eml PASSWORD

Example for digger:
   Etarminer  -url [Suspicious link removed]:8008 -wlt YOURWALLET -wrk 1 -eml x

Example for suprnova:
   Etarminer  http://etc-eu.suprnova.cc:3333 LOGIN.WORKER -eml password

Example for nicehash:
   Etarminer -url http://daggerhashimoto.eu.nicehash.com:3353 -wlt BITCOINWALLET.WORKER -eml 1

Using the app to collect statistics Etarstat:

        Add miner and in open window set:
           <Name> name your miner
           <Ip>  ip adress miner in IPv4 format
           <Port> port miner

          If need use right click menu:
           <Edit> to edit miner settings
           <Remove>  to remove miner from list
           <View console> to view console data miner
      <restart miner> to restart miner with parameters
           <Quit> to quit from aplication

        Miner background color mean:
           <red> no connection with miner
           <green> conection with miner and pool establish
           <orange> conection with miner establish, but pool is not answered

        Use checkbox to disable/enable sound notification
        Settings save when aplication close
   
   When you select a miner from the list at the bottom of the window you will see command line parameters,
   which run miner was. if necessary, add to change in settings, and restart the miner through the menu.

hi

screens/confirmations?

hi.
Confirm what you need ?
If you need proof of mining speed , then here:
https://gradi.com.ua/temp/Untitled-1.jpg
https://gradi.com.ua/temp/Untitled-2.jpg

Claymore miner 6.0 give speed 8Mh/s for my GTX 660, genoil miner 9Mhs, my Etarminer 10.5Mhs

Etarminer v1.5 available for downloading

I have a GTX 1080 your miner just gives me 3,91MH/s whereas I have with Claymore 25MH/s what is wrong?
Here are my params:
-int 20 -tsmg g0 61 -wsz 386 -ess 1

it also seems to ignore the workername setting -wrk..since in ethermine.org it is listed as default ..

As soon as I receive my SSD to power my 1070 setup, I'll test this out and post the results here.

We have this saying in Holland...

"When the cat leaves home, the mice dance on the table"...

 ;D

Well the miner leaves the GTX 1080 in Performance State P8 which is very slow.
I need to reboot the complete system to get the card working properly ..looks like this miner is not ready for use..going back to Genoil and Claymore.

*Thanks for the fish*

what operation system install? if win10, hen more and not get in the new driver, you need older.

1070 - 31Mh/s
970-21Mh/s

What do you have in mind?
For architecture Kepler and Maxwell, my miner shows a greater speed than yours. Pascal is a little less.
770-18.5
660-10.5+
970-21
1070-31

I installed GTX 660 3072mb I propose to carry out the test. Connect to eg, dwarpool at 24 hours, with my miner and your miner and see how many share acept...

I have nothing in mind, I was just being cynical. To be honest I don't know anymore how fast my miner is, the only thing I know is how free it is.  ;D

your miner is at least as a fast, i was doing 31.5 or 32 as well but need high oc on the memory, this with a 1070, and it is also free

you have donate...

Hello,

I have windows 10 installed and the latest drivers 372.54 and why it works with claymore and genoil above 25MH/s?
So I don't know what is wrong and which drivers you meant I should use.

with 1080 i have a problem, other card work fine. Of course, use another miner, if your card does not work on my miner.

So which driver you meant I should use then?
Could you also implement M7 algo?

I have`t 1080 card, so i can`t say  what driver need.
I have not yet found out that interferes with the right to work Miner with 1080

I can't put a devfee on what is partially other's people work (or IP for that matter). Even if I could, I wouldn't consider myself seasoned enough in this scene to try. You need to build up quite some credits for large groups of people to move over to a closed source fee miner, even if is faster.

If I were you, I'd release a really free version of your miner that is exactly as fast as mine or Clay's or whatever is the baseline these days. Then if they figure it is stable enough and they like the additional features, they can switch to your faster version and pay the fee. But it has to be faster first. You are 1% behind by default ;)

Admittedly it is a bit annoying to see the donations almost dried up (with the exception of some real supporters) when Claymore hit the market, and while I'm away for two months, 2 CUDA eth miners with a devfee are launched (yours and Clay's v6). But on the other hand, it actually is about time I start doing something else  ;D 

I think a free/open-source miner is more important to Linux users than to Windows users.

And we say:
"What every job should be rewarded"
And will use Genoil miner or Clay's miner or Etarminer let everyone decide for himself

You know, I prefer a good old Genoil miner, that I near never updated and that never had any problem, than a 10% faster miner that has a 2% fee. Question of mind. I don't like to be obligated to donate.

What is your graphics card and what  hashrate you got at Genoil miner?

same i don't like fee, and that's why i'm not using claymore, i prefer to donate one time and get support for that algo

we already need to pay for the pool fee and for the electricity, that's enough for my taste

And that got a lot of changes in miners which have donate?
Donate does not encourage the writing of new versions.

that's what we love and open source too, thanks Genoil.
on the other hand it's good there is a competition but i will never run closed sourced miner no matter what releaser's reputation is

when you do the first release, then you have only to tweak it, i think the donation can cover that easily, we are talking about one algo only

i can agree if it where a full new release that improve many algo, that's a different story and require a donation far higher

That's easy to disprove.  If it were true I would not have updated Genoil's miner.
https://github.com/nerdralph/ethminer-nr/tree/110

v1.5exp available for download.
- slightly larger heshreyt (-exp 0)
- added dynamic change of mining intensity (use <g> to select gpu, use +/- to increase/reduce intensity).

Okay i will test :-D
Hopefully i get as close to 26mh/s as with Claymore and genoil on my GTX1080

Tested and well still only 3,90MHZ somehow your app don't utilize the memory.
It stay at just 15% while genoil and Claymore using min. 75% ... something is wrong with your implementation on NV.

Try cuda.lib from folder cudalib (v6_5.zip) repalce them curent cuda.lib

GeForce® GTX 1070 G1 Gaming +300mhz on memory ~28mh/s

Must be around 31Mh/s on win7
https://gradi.com.ua/temp/-exp1_gtx1070.jpg

He paбoтaeт c GTX 980 нa cтapыx дpaйвepax 347.52

Still get just 3,9MH/s also with replaced lib

Cuda device[0]:GeForce GTX 1080(4095Mb)
Compute capability: 6.1
Device have:1280 cores
----------------------------
Stat. server enable
Main>Try logined to eu1.ethermine.org
Authorized
Epoch 73
CACHE create..complete
GPU0 tOFF  set:85C
GPU0 intensity:18
GPU0 worksize :128
GPU0 smtarget :61
Device[0]: DAG generate..
Device[0]: generate complete (4558 ms)
Main>Try logined to eu1.ethermine.org
Total: 0.00 MH/s,GPU0 0.00 MH/s,A:0,R:0 Time: 0
GPU0 46C
Authorized
Total: 3.90 MH/s,GPU0 3.90 MH/s,A:0,R:0 Time: 0


Could you please provide settings?

Miner settings is not help you. That same thing else.. Problem only with 1080 card.

So whats the problem then? Its the same as the GTX1070 just moire SM Cluster

doesn't work with GTX 950 Win7  x64
                         GTX 980 Win10 x64

1080 have other memory as GDDR5x

So you mean u need to change the way you access the memory bus and put load into it.

PTX have not tools to change type of memory access.

Very strange, you can`t start miner with cuda 6.5 and driver below 350.xx. Becouse you not set target, and cuda 6.5 is not yet aware of the existence compute capability 6.1. Try set -tsmg g0 52 (if your gpu is 0)

****************
Reload Etarminer v1.5exp more hashrate.
My gtx 660 give 11+Mh/s without overclocking
https://gradi.com.ua/temp/gtx660_etarminer_11mh.jpg


Who has problems with the series Pascal in WINDOWS7 64, install the driver that fixes the work memory:
http://www.nvidia.ru/download/driverResults.aspx/105720/ru (http://www.nvidia.ru/download/driverResults.aspx/105720/ru)
How install read here:
https://forum.bits.media/index.php?/topic/25235-geforce-gtx10-pokoleniia/page-21#entry490132 (https://forum.bits.media/index.php?/topic/25235-geforce-gtx10-pokoleniia/page-21#entry490132)

E:\Test  Miner\Etarminer_v_1_5exp\Etarminer_v_1_5exp>Etarminer -url http://eth-ru.dwarfpool.com:8008 -wlt 0xF04f7978AA95be8D6ACa243b7150fe3384946592 -wrk 1 -eml x -int 18 -wsz 128 -exp 0 -ess 1
****************************************
*  Etarminer v1.5 for ethereum mining  *
*        with  1%  development fee     *
****************************************
Driver version API: 7.0
Found 2 Cuda device.
----------------------------
Cuda device[0]:GeForce GTX 980(4095Mb)
Compute capability: 5.2
Device have:2048 cores
----------------------------
Cuda device[1]:GeForce GTX 980(4095Mb)
Compute capability: 5.2
Device have:2048 cores
----------------------------
Stat. server enable
Main>Try logined to eth-ru.dwarfpool.com
Authorized
Epoch 73
CACHE create..complete
GPU1 tOFF  set:85C
GPU0 tOFF  set:85C
error cuModuleLoad1-209
FATAL ERROR GPU1
error cuModuleLoad1-209
FATAL ERROR GPU0

I noticed something now on my post ..

Cuda device[0]:GeForce GTX 1080(4095Mb) <-----  ??? :'(
Compute capability: 6.1
Device have:1280 cores <---------  ???
it the half of what the card is holding..halfed ram and cores..no wonder why the performance sucks.

I think it is because the old drivers that use the api 7.0 you have the opportunity to put the driver 369.05 ?

980 normal hash rate only 347.52
with new driver hash rate = 5mh/s

To determine the amount of memory in ptx there is only one comand cuDeviceTotalMem
Miner writes to the console the result that he gave this command.
Any number of cores or the amount of memory in the console does not affect the result...
Nvidia driver gives this information..

ok, i am try istall this driver and see what happen..

Thank you very much !

Try this archive Etarminer_v_1_5exp_980.zip
I think cuda 7.0 is not suported ptx 4.3 and that is why you see error.
I am replace 4.3 to 4.2

Everything works fine!!!
THX

What hashrate you get?
This version miner have two kernel. You may select -exp 0 (or without exp)   or -exp 1 (see what kernel gives more hashrate)

****************************************
*  Etarminer v1.5 for ethereum mining  *
*        with  1%  development fee     *
****************************************
Driver version API: 7.0
Found 2 Cuda device.
----------------------------
Cuda device[0]:GeForce GTX 980(4095Mb)
Compute capability: 5.2
Device have:2048 cores
----------------------------
Cuda device[1]:GeForce GTX 980(4095Mb)
Compute capability: 5.2
Device have:2048 cores
----------------------------
Stat. server enable
Main>Try logined to eth.pool.minergate.com
Authorized
Epoch 73
CACHE create..complete
GPU1 tOFF  set:85C
GPU0 tOFF  set:85C
GPU0 intensity:20
GPU0 worksize :128
GPU0 smtarget :52
GPU1 intensity:20
GPU1 worksize :128
GPU1 smtarget :52
Device[0]: DAG generate..
Device[1]: DAG generate..
Device[0]: generate complete (3720 ms)
Device[1]: generate complete (3771 ms)
Main>Try logined to eth.pool.minergate.com
23:03:21 New Job <3f4b0c39><diff:8>
Total: 41.19 MH/s,GPU0 20.76 MH/s,GPU1 20.43 MH/s,A:0,R:0 Time: 0
GPU0 46C, GPU1 44C
23:03:24 New Job <9d624f59><diff:7>
GPU1 Share Found -)
nonce : addc3e4ab26cc910
digest: 761dccbd08324e2c3c9c5dbe710357d75b5d060e79dfddd2d24afcb9b0ede543
header: cf74001c576d6d19d856d9cd5cf6cf17d8a30dfc9f19098d4778b5684b449e7a
Share Acept-54ms
Total: 41.20 MH/s,GPU0 20.77 MH/s,GPU1 20.43 MH/s,A:1,R:0 Time: 0
23:03:30 New Job <cf74001c><diff:7>
GPU0 Share Found -)
nonce : 3978864fe69bef6e
digest: 454afab5e6751376e404fa265a9ad59a20ce1d48ee745164902ae00512ac9ed3
header: 1793ad7d2c9ef204e6843b4e5749729d6da66230f4280140e40bd9902a1f0d20
Share Acept-54ms
Total: 41.19 MH/s,GPU0 20.76 MH/s,GPU1 20.44 MH/s,A:2,R:0 Time: 0
Total: 41.20 MH/s,GPU0 20.77 MH/s,GPU1 20.43 MH/s,A:2,R:0 Time: 0
GPU0 47C, GPU1 45C
GPU1 Share Found -)
nonce : b3a2c6aaf738e3d2
digest: 73d7492e1ea2986d6f4b42538b5452e53de07c228ebcdd195d54a756245cc318
header: 1793ad7d2c9ef204e6843b4e5749729d6da66230f4280140e40bd9902a1f0d20
Share Acept-52ms
Total: 41.23 MH/s,GPU0 20.77 MH/s,GPU1 20.46 MH/s,A:3,R:0 Time: 0
Total: 41.20 MH/s,GPU0 20.77 MH/s,GPU1 20.42 MH/s,A:3,R:0 Time: 0
GPU1 Share Found -)
nonce : b3a2c6ab0665ef0f
digest: 798448cb49c3f04145e6ad1c2728671839e69f33ca291ee424c96cd2394ad919
header: 1793ad7d2c9ef204e6843b4e5749729d6da66230f4280140e40bd9902a1f0d20
Share Acept-54ms
Total: 41.22 MH/s,GPU0 20.78 MH/s,GPU1 20.44 MH/s,A:4,R:0 Time: 0
GPU0 47C, GPU1 46C
Total: 41.22 MH/s,GPU0 20.78 MH/s,GPU1 20.45 MH/s,A:4,R:0 Time: 0
Total: 41.23 MH/s,GPU0 20.78 MH/s,GPU1 20.45 MH/s,A:4,R:0 Time: 0
GPU1 Share Found -)
nonce : b3a2c6ab17653212
digest: bb9f39074edfaff962c9faa74a75ea080e9eca86f693a56847e0d17941b72993
header: 1793ad7d2c9ef204e6843b4e5749729d6da66230f4280140e40bd9902a1f0d20
Share Acept-52ms
23:04:04 New Job <1793ad7d><diff:6>
Total: 41.22 MH/s,GPU0 20.77 MH/s,GPU1 20.45 MH/s,A:5,R:0 Time: 0
GPU0 47C, GPU1 46C

Пpo 2 ядpa нe пoнял пpo -exp 1 или -exp 0

B кoмaнднoй cтpoкe мoжeтe пocтaвить пapaмeтp -exp 1
Или -exp 0 (или вooбщe бeз нeгo, этo тoжe caмoe)
Ha мoeй Gtx 660 и пapaмeтpoм -exp 1 дaeт нa 0,5MX/c бoльшe.
Пpoбyйтe кaкoй вapиaнт для вac пpeдпoчтитeльнee.

чтo-тo мaлoвaтo
20 мaxoв 970 дaeт

Пoтoмy,чтo этo нe Paдeoн

я дyмaю этo бeз paзгoнa..

бeз измeнeний.

You should keep it english to follow up for others.
I installed win7 and the driver now i get 21MH/s with my GTX1080 still a 9-10MH/s slower than on windows 10 with Claymore or Genoil

What driver you are istalled? 369.05 ?
For miners to work correctly you just need to choose the right combination OS + drivers

Well I took the 369.05 but well with genoil and Claymore and ccminer it all works fine on windows 10 with the latest.
And I don't mine all time..I play games and also using 3D Vision 2..and i need up to date drivers. So there must be a way to solve it with your miner..

Ha нвидии вышe 21-23 нe выжaть бoльшe (23 нa ti вepcии)
У мeня 3 шт 980 бeз paзгoнa 19+ дaют a c paзгoнoм 20+

Well, on the win10 with the latest drivers WDDM 2.1 which shows  hashrate Etarminer?
as Genoil say:

Дa, вce кapты пo paзнoмy дaют xeшpeйт. У кoгo-тo 970 нa win7 и 22 дaeт нa дpaйвepax 369.05. У кoгo-тo нeт.
Tyт вcex пoд oднy гpeбeнкy нe пocтaвишь.
Ha вeткe y пoльзoвaтeля gtx770 дaeт 19+ нa мoeм мaйнepe c ocтaльными пpocтo вылeтaeт. тaк paзницa мeждy 770 и 970...

You can verify if your driver supports WDDM 2.1 by running dxdiag and look for the WDDM version. You need to have Windows upgraded to Anniversary Edition, or be on Insider Preview. But obviously, if it is WDDM 2.1 and there is a large difference between Genoil/Claymore and Etar on the same system, there's something suboptimal going on with Etar's PTX kernel ;D

Thanks for the help.
I do not think there is any problem in the kernel.
On all cards, except for 1080 still works fine.

how to me to set up "eth-proxy" for dwarfpool?

Miner use stratum, eth-proxy is not supported.
Why do you use the eth-proxy? Connect directly to dwarfpool.

Stratum Proxy v0.0.5. Additional 10%~20% increase of earning compared to standard getwork and failover option

Etarminer not support proxies.
You do not need eth-proxy, just connect the example .bat file and all.

**v1.6 available.
- bug fix
- suprnova.cc pool supported
- nicehash pool supported
- some processing algorithm
- in kepler -exp 1 a little bit faster.
- autorestart miner if crash

link ?

link at the beginning of a topic.

https://drive.google.com/drive/folders/0B9DK4ZXu8liUMkxpVkxaSHJGTms

1.6 wasn't in the drive before

Etarminer_v_1_6.zip is present

1.7 available for download.
-faster than previous versions.

video comparison of the results of 4 miners:
https://youtu.be/G4-3S1LMJY4 (https://youtu.be/G4-3S1LMJY4)

Etarminer 1.7fix
low cost gtx 1060 3gb (Inno3d, Palit) 21Mh/s - good choise for mining.

Are you working on a zec miner? :-D

even lower cost sapphire rx470 4gb (ref-like) - 28mhs eth, 45 sols zcash - good CHOICE for mining ))

i am talking about nvidia card...
and 1060 - 21Mh/s  90w... 90/21=4.2w/Mh  
rx 470 -25Mh/s  140 = 140/25= 5.6w/Mh (or 140/28= 5 as you say)

i am talking about eth and about etarminer, not zec

linux support?

1.8 available to download.
No fee!

Дoбpoгo вpeмeни cyтoк гocпoдa. У мeня "ZOTAC GeForce GTX 770 ZT-70302-10P c нeзнaчитeльным зaвoдcким paзгoнoм гpaфичecкoгo чипa". Tyт пpoчёл чтo кapты дaннoй cepии cпocoбны выдaть 19+ MH/s. У мeня жe дeлo oбcтoит тaк чтo дaннaя кapтa выдaёт 15.5 в cтoкe и 17.3 в paзгoнe нa дpaйвepax 347.88 (c любыми дpyгими дpoвaми cкopocть нижe). Пoдcкaжитe, мoжeт быть дeлo в пpoцeccope? Tип ЦП DualCore Intel Core i3-2120, 3400 MHz (33 x 103). Кaк я пoнял дaнный кaмeнь в игpax видeoкapтy нe pacкpывaeт, мaкcимyм чeгo мнe yдaвaлocь дoбитьcя этo 80% зaгpyзки. Tecтиpoвaл в Windows 7/10 64 Ultimate/Pro - paзницы нeт.

Boт тaкoe пpoизoшлo нa Windows 10. He дocтaтoчнo пaмяти?

http://storage6.static.itmages.ru/i/16/1118/h_1479501118_3482571_4ac052a8c8.jpg

B cиcтeмe 2 видeoкapты GTX 770 и GTX550ti. Caмoe интepecнoe чтo GPU-Z пoкaзывaeт вceгo 44 Mб зaнятoй видeo пaмяти нa GTX 770. Пoмeнял иx мecтaми в кopпyce и вcё зapaбoтaлo.

Ha Windows 7 тaкиx пpoблeм нe вoзникaлo.

yes, what about linux support?

GPU2 smtarget :50
Free memory on GPU: 1686Mb
GPU1 intensity:18
Total memory on GPU: 2048Mb
GPU1 worksize :128
Need memory: 1756Mb
GPU1 smtarget :50
Free memory on GPU: 1686Mb
error cuMemAlloc(Dag)-2
Total memory on GPU: 2048Mb
GPU2 error in dagfunction
Need memory: 1756Mb
FATAL ERROR GPU2
error cuMemAlloc(Dag)-2
GPU1 error in dagfunction
FATAL ERROR GPU1
GPU0 intensity:18
GPU0 worksize :128
GPU0 smtarget :61
Free memory on GPU: 3552Mb
Total memory on GPU: 3583Mb
Need memory: 1760Mb
Device[0]: DAG generate..
Device[0]: generate complete (3571 ms)
18:57:33 New Job,target<0000000225c17d04>
18:57:42 New Job,target<0000000225c17d04>
18:57:47 New Job,target<0000000225c17d04>
18:57:57 New Job,target<0000000225c17d04>

can you give me an idea what in doing wrong?

not enough memory. you use windows 10? I had also a problem with GTX 770. In Windows 7 have no problem.

Дa, coвepшeннo вepнo, нeдocтaтoчнo пaмяти.

you have 2Gb at gpu1, in win 7  all must work correct, but in win10 your gpu not enough memory.

Пoчитaйтe в этoй вeткe: https://forum.bits.media/index.php?/topic/27976-etarminer-novyi-mainer-ethereum-dlia-cuda/ (https://forum.bits.media/index.php?/topic/27976-etarminer-novyi-mainer-ethereum-dlia-cuda/)
Taм y чeлoвeкa 770 и 760 ecть.
и для kepler лyчшe -exp 1
-wsz 128  (256 мнoгoвaтo, нaдo пpoвepять. Haпpимep, нa 660 -wsz 128 лyчшe, a нa Pascal -wsz 64 эффeктивнee.)

New version v1.9 available to download.

Changelog?

New interface..
altered structure miners..
tweaked algorithms..

Why do you insist on posting your speeds with a GTX 660?

 Those things are ancient, extremely inefficient, and NOT relevant to mining in the last few years.

because i have gtx 660  :)
And i have gtx 1060 and got around  21-21.5Mh/s 90W (it is possible get more with memory +700)

Hashrate with gtx 1070 ? .

Try.. and post result.

do you plan to compile it under linux?

Hello Etar, I got an error can't run. I'm using GTX660

your gtx 660 maybe have only 2Gb memory?

Yes, 2G Memory is not enough to mine ETH right ?

Sometimes enough, sometimes not (especially if the card is one and the same desktop on it)
You can try a different currency with Etash algo which less epoch. Expanse for ex.

And redownload v1.9 slightly faster.

GTX660 -exp1 -int 20 -wsz 128   no overclocking - 11,5MX/c
GTX660 -exp1 -int 20 -wsz 128  Core+80, Memory +150, 12+MX/c

GTX1060 3GB (Palit, Inno)  -exp0 -int 20 -wsz 64 Memory +500, Power Limit  75% - 20,5MX/c
GTX1060 3GB (Palit, Inno)  -exp0 -int 20 -wsz 64 Memory +700, Power Limit  100% - 21,5MX/c

ok, Thank you for your help. I'll try to test it.

Cпacибo. пocтaвил "-int 20 -wszg g0 128 -toffg g0 100 -slcg g0 -exp 1". Былo 17.7 MH/s, cтaлo 18.3 MH/s . Boт тaкaя cтpaннaя штyкa, в вepcии 1.8 пoд paзгoнoм кapтoчкa пocтoяннo cлeтaлa нa 0, пoмeнял -toffg g0 c 85 нa 100, пpибaвилa 0,3 MH/s и пepecтaлa cбpacывaтьcя.

28/29 (+600 ram) on 8.1 64 bit, 1070 stock ;)

Win 10, WDDM 2.1 375.95

1070 only 10MH/s

Please fix support for windows 10

 It's getting very marginal at best - I just realised a couple of nights back I didn't have ant of my rigs with 2GB cards back online yet - turns out my pair of 2GB HD 7870s can still run ETH but they're 60-80% more profitable on ZEC right now, so I'll probably just leave them pointed that way even when the profitability drops back to parity ballpark.
 Moving over to ETC might also be an option, it's generally very close on profitability to ETH.


 For comparison - Genoil 1.1.13 on my 1070 rigs with Afterburner set for +550 memory, -200 core, 75% power limit pull 28-29 Mh/s under Windows 7 with the 372.70 drivers. I've had nothing but ISSUES out of any of the 375 series, and NVidia has stated in at least one of their "known issues" on one of the 375 series drivers that they had problems with Folding@home - I suspect that issue likely ALSO affects mining.

I try fix it, but now no result yet. Maybe this is becouse i use cuda driver api. As i know other miners use cuda realtime api.
At Win10 random access memory is very-very slow.

Are you using Windows 10 anniversary version 1607?

after they fixed TLB on nvidia with wddm 2.1, I can say win7 is faster with claymore and genoil under win7 at all

Win10 version 1607 build 14393.447
Strange things:
Random access to memory slows down execution..
But if access only to one memory adress - all work fine.
I think, something nvidia is not fixed..

Win 10 is more fast to win 7 .

Claymore 7.4 with gtx 1070 , and windows 10 last update and last nvidia driver have 27mhs for card in my system .

What is your launch config look like, im only getting 20 on my 1070

thx

what os?

-exp 0  -wsz 64

Soon.. Today i am launch etarminer at Ubuntu 16.04
https://gradi.com.ua/temp/etarminer18ubuntu.jpg

Etar,

Im using win 10

Oh,, at win 10 i have 3Mh/s on GTX1060 :))) I am not fix slow execution at win10 yet...
At WIN7, Linux, Vista64 work fine!
What driver you are used? And what version and build WIN10?

Claymore 7.4 with gtx 1070 27mhs for card in my system On Windows 10 .

https://s14.postimg.org/ohvheyhxd/Cattura.jpg .

.

 That's not as fast as I'm seeing under Win 7 as I previously posted, much less "more fast".

 Win 10 is widely reported to have issues with some of the NVidia driver versions - seems to be VERY picky there - but with the "correct" driver version(s) is about the same as Win 7.

LINUX version Etarminer 1_8 available
https://drive.google.com/drive/folders/0B9DK4ZXu8liUMkxpVkxaSHJGTms (https://drive.google.com/drive/folders/0B9DK4ZXu8liUMkxpVkxaSHJGTms)
Tested on Ubuntu 16.04

claymore 6.3 with gtx 1070 33mhs for card in my system On Windows 7 )) 65%tdp

And is it possible to run it without GUI ?
i.e. after:
service lightdm stop

 RELOAD Archive . I Fix this problem.  Use -GUIDIS in comandline (example in START.sh)

Hmm
I just call
Etarminer -url http://eu2.ethermine.org:4444 -wlt "mywalletadress.worker -wrk workername -eml x -int 21 -wsz 128 -ess 1
but ther eis no reported hashrate shown in ethermine.
any advice to that?

I have two gtx970 in sli mode at 35.2 mh/s rate (gpu@1499 mhz watercooled)

Ot on:
Maybe one has an advice, too to my watercooling stuff.
An other question is that my cooling water exits the second gpu at 60 °C (after the first it''s 41°C), so I plan to put a radiator in between the two gpus. Is that a good idea?
The System is cooled with aquaduct 720 xt mark iv at the moment.
ot off

Try disable SLI in Nvidia COntrol Panel, I could not get it to work with SLI Enabled

Getting 40 Mh/s on 2xGTX970 intensity 18,20

my bat:
Etarminer -url http://eth-eu1.nanopool.org:9999 -wlt walletaddress -wrk workername -eml  email -intg g0 18 g1 20 -wsz 128 -exp 0 -ess 0 -toffg g0 87