Bitcoin Forum

Why so many down :(

p2pool mining is best  i earn many more then all other server mining´s

SBC seems to reject every share I send... any ideas? ¯\(°_o)/¯

EDIT: All others I've tried here have been fine*

Nice  ;D

we need more miner !!!!!

Ah yes, seems like we have an issue.

Give me a few to check it out.

I will let you know when it will be back.

Seems to be working OK now.

Derp, cgwatcher swapped conf files on me, ignore that... Def not working right now >_<

i dont seem to be receiving any IFC that i mine..

Can someone tell me what client to use?

I compiled the one I am using from GitHub.

I didn't do addnodes or anything, I just compiled and let it run.

I am about to get rid of this coin all together because it's just not a good coin.

I am using version 1.8.0.

I see there are other versions out there also, which one do I use?

did you fully update to the recently blocks?
as of right now there are 464561 blocks

GrandCoin(GDC) down? Showing dead over here on port 9876

Bitbar went poof...

I have restarted it.

I think the problem with this crap is that people keep trying to mine the wrong algo.

I had a person the other day email me and ask why they been mining FTC for a whole day with a Block Erupter and haven't received payment, DOH!

I should probably post the algo type somewhere around the coin.

I have restarted it.

I think the problem with this crap is that people keep trying to mine the wrong algo.

I had a person the other day email me and ask why they been mining FTC for a whole day with a Block Erupter and haven't received payment, DOH!

I should probably post the algo type somewhere around the coin.

Or maybe split them up into sections? Rather than list them all together and mark each individual one?

Also, what you're saying is other people hashing on the wrong algo is facking things for the rest of us? Lame...

Yeah, it messes the pool up a little bit.

Causes a high DOA rate and some times actually stops P2Pool from working, like you experienced with BitBar.

I can see it happening, I know what address is doing it, but I have no way to really stop them or warn them.

If I can find a way to get the IP address of the user from their coin address then I could at least block them, but I haven't found that out yet.

tcpdump or if it's something simple like 1 person mining to one port (or even 3 or 4 to one port), should be able to figure it out with some tcpkills

Any ideas why we're getting so many work restarts on SPT stratum? I'm not seeing nearly as many blocks come through as work restarts, and accepted shares seem sporadic

http://imgur.com/YNa0qPz
http://imgur.com/YNa0qPz (http://imgur.com/YNa0qPz)

You need to make your share diff smaller.

Append this to your wallet address in your miner: +0.00058207

So your command would look like:

miner --scrypt -o p2pool.org:9775 -u MFdqEmmo8a6mT6a8WjMb2BmKaQPrFx2PK6+0.00058207 -p spt

Keep adjusting that until you find a steady setting.

I will be adding these details and a better explanation to the site soon.

Perhaps I can make a calculator for it so it's easier for the end user.

hello,

I never mined with a p2pool..

do I need the wallet fully synched before starting to mine?

Seem to be having a lot of trouble with GDC, can't connect, any news on that front?

I give up on Grandcoin for now.

Every time P2Pool submits a block to the client it kills the client and P2Pool can't get more work.

I will continue to look for a solution to this issue.

Next 3 = PHS, GLX, GLC? ;D

I have to find someone who can make those for me.

I would love to add them.

I just don't have the abilities.

I tried adding GalaxyCoin but the client crashes and has an alert message stating it is out of data.

GlobalCoin I can take a look at.

What is PHS based off of?

I might be able to make it work.

I'm mining for 12h+ into p2pool.iorg (doge) I have not received 1 single doge, could you please investigate or clarify how I can investigate? Dis my address - DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h

Much appreciated!

Hashrate was around 700 MH/s. I did point my miners away now for obvious reasons. I am using GUIMiner/Scrypt, so very basic commands build-into GUIMiner. Had not a problem with this setup with other pools yet. Can you find my username / doge adress somewhere inside your stats and what happened to the last 6-12h of mining?

Are you using an address from the client on your computer as the username or from an exchange?

And also, if you were mining in MH/s you were most likely mining with the wrong algorithm.

If you are using the SHA256 algorithm to mine then that would explain why you haven't gotten paid and haven't shown up on the payout list.

Not trying to be rude or anything like that but I don't think I would have over 100Mh/s on my pool if it wasn't paying out.

Hi, thanks for your fast reply, much appreciado.

- Adress from my Client on my PC
- I am mining 1MH/s as in 1000 KH/s = Correct algorithm, just applied mathematics at work.
- I am NOT using SHA256, I am using Scrypt as posted earlier

The problem is not with me, the problem is with the pool, maybe orphan block, no block or else? In 6h no no income in DogeCoin, this is bad news. No possibility to research. The pool web site is like a white paper, no info, no stats, no nothing. Please advise how I can get my money. It is mine, shares were submitted, electrity used, GPU 100%, Proof of Work.

2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Pool 0 difficulty changed to 935.495186
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart

Hi thanks for your continuing help with this and sticking with my problem!

I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.

Here's the screenshot:

http://d3j5vwomefv46c.cloudfront.net/photos/large/828632522.png

As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.

The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)

Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?

Whn i point my miner to the tigercoin pool, i do not get listed in the graphs and also i wont get paid a coin. Why is this? I use my wallet as username and 10 times checked the pools address. Nothing happens.

Any idea?

jude,

i'm curious about something.  i know when i used to run my p2pool, i'd have, say, 2 or 3 real miners, and about 90 random people on it every day, half with invalid addresses.  

do ports ppl were using that left ever close for you?  or it may have just been because they still had me as a backup pool?  eventually the whole 1000's of sockets being used, i couldnt do anything else (and i had firewall set to max 3 connections as well)

The issue you are having is you aren't submitting any shares.

See on GUIMiner where it says accepted, it says 0.

You technically aren't mining if you aren't submitting shares.

I personally don't use any of the GUIMiner garbage but I believe you have to put --scrypt in the Extra Flags box.

I have no problem helping people out at all, with out all you precious miners P2Pool.org is useless.

I highly recommend you use a different miner like BFGMiner since CGMiner is discontinuing Scrypt support.

If you need assistance with setting up BFGMiner you can post here or PM me.

> I just re-started the miner, that's why it says 0 share there. There were accepted shares.

I had no problems with GUI Miner Frontend the last 3 years, I started mining with it in 2009. As I said there were many submitted shares, the screenshot is something I took after re-starting mining, after a computer reboot, it is just an example screenshot and not something to base debugging and troubleshooting upon. Can you please check these addresses DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD and DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h and if there are any shares submitted on these adresses.

Thanks for the tip with BFGMiner, I might even check it out, however I am mining into Multipool, Poolerino and many others without any problems with GUIMiner frontend (it is a just a GUI to CGMiner!!)

Thanks for adding Gamecoin (GME)

Please update in OP as well :)

It doesn't show GME link on p2pool.org homepage. Will you update the site homepage as well?

Hello. I have a problem. two pictures. one of them - my mining. next - another player ...
why is there such a difference? and where's my money?

http://img-fotki.yandex.ru/get/9748/110724836.f/0_df61a_dac0e9a_XL.png
http://img-fotki.yandex.ru/get/9754/110724836.f/0_df619_76720919_XL.png

If you check the front page of the website you will see it says to use your public key.

This is not your address, your public key. You can get this by opening your client and going to console and running getnewpubkey p2pool, this will spit out a string, use that as your username.

The big paragraph at top says "Using your payment address as the username and any password". I realize it says to use public key for 2 of the coins down lower in the page, but people might not actually go down there and look. They might just read this top instruction, click the coin at top of menu bar, and then be mining wrongly. (Looks like 3-4 on your node are using invalid addresses atm.)

I'd suggest changing the top spot to read:

Using your payment address (for most coins, some require public key instead, please see blow) as the username and any password.

And on the rare coins that need public key, putting a notice on the top of those specific node pages too.

I notice your UNO node is running solo and not connected to the rest of the p2pool network. Is that intentional?