Bitcoin Forum

Hi all,
 
Please check out www.megamultipool.com
We have more than 20 scrypt based pools & +10 SHA-256 pools.
We have a auto-profit-switch pool for scrypt (running on port 80! so it is possible to mine behind a firewall) & we have one for SHA-256 coins.
 
Pool fees are 1%
AutoPayout each minute!
 
First 50 that join & send me a private message with their username will have 0% fees (lifetime)
 
If you notice any bugs or problems, or you have some remarks. Just reply! Thx

Like the interface looks nice!  PM'd and pointed a few Mh/s your way...

Thx! If you notice any problems / bugs just let me know! your pool fee is now 0%

Looks very promising. Can you please tell us where the servers are located?

I signed up! Looks really good. I like the once per minute payout, instead of at a certain amount of coins! Will you also offer automatic exchange of coins in the future?

in Amsterdam/Europe

Hey! I am from Amsterdam as wel! Nice to see a Dutch initiative here :)

perfect!

yes, automatic exchange is on my todolist!!!

great! I also really like the fact btw that you do not have bitcoin, but only altcoins in your pool!

I still have a few 0% fee pool tickets left! join the pool & send me your username!

the website has a clean layout. pretty easy to get around and find what im looking for.

I signed up and pm'ed my account name. Great mining pool. :)

got a question here. i have 2 miners on different coins, however i can only see one on the currently mining tab. also on the balance tab, only one is showing up there also, yet the miner shows shares being accepted. is there a minimum speed before it gets picked up? do i loose those accepted shares?

thanks

pm sent for registration

I wanted to ask, are you going to add BTC on sha-256 when profit-ratio drops below 100%?

Worker   Hashrate   Difficulty
Alty.1   129           21.93
Alty.2   135           27.38
Alty.3   135           22
Alty.4   133           33.78


Why is 80% of my power not being accounted for?

Those 4 workers should be showing 800+ each.

I'm turning this off for now as I don't understand what the problem is.

Hi,

I seem to be getting >= 5% invalid shares mining scrypt, where when I was just mining litecoin pool over stratum it would be <=1%.

Would be good if we could get more of the coins on coinwarz ;)

x

Same issue here, but 30-40%. Also noticed, prop system needs lots of users. And since this is still the beggining, you should think of changing it to another system for a while.

forgot / reset password is not working

I can't get back in

Signed up. Great looking website.

Definitely enjoying the interface - can't wait to get my new rigs set up to try it out... thanks for sharing :)

Great & Nice site 
Like! ;)

There is indeed a problem showing the hashrates on some parts of the site (the graph on the coin's dashboard should give you the correct value).

I will look at the problem tomorrow morning!

thx all for your support

I often get the warning  "not responding" (see picture):
http://i41.tinypic.com/312tue1.jpg
and having "fileover only enabled" moves for a few minutes in the pool of backup

I use 3 pc with 3 programs and have same problem:

cgminer 3.2.1 - scrypt
cgminer 3.7.2 - scrypt
bfgminer 3.9.0 - sha

ps: sorry for my english  ;)

hi i am sign my user:pennino thanks ;D

=> The multipool switched to the new best profitable coin at xxh 10m, xxh30m & at xxh50m. So there is maximum 1 disconnect each 20 minutes



=> 0% fee is set for you account

On the balances page, would it be possible to show the combined value of the coins, in terms of either LTC or BTC?  With so many small amounts, it's difficult to judge your mining performance.

hey, your site looks really great! is there some timeline for the auto exchange feature? a week, a month, a year?  ;)

signed up with username "willempie" 0% fee please ^.^

I like the interface! Great site.

+1
 ;)

anyone been using this?

yes

Worker hashrate is not displayed correctly.
I use one worker with 300 kh but on the Balance - general statistics page it shows 16034545.

P.S: it would be nice if you had a worker statistics page ;)

Also it would be nice if the coin list would be separated in two columns: scrypt and sha256 in order to quicker switch to interested coin if you are mining scrypt  or SHA256 only.

Hi all,

everybody that have send me a message has now 0% pool fees, i can't respond at private messages ( only 1 each 10 minutes)

We have split up the pool overview page already in 2 parts (scrypt / sha-256)
We will do this also on the homepage, balance page, accounts page etc ...

One more thing, i have 2 workers and somehow when the pool switched from LOT to NET, one worker is stuck with LOT and another is mining NET.
Is that normal?? or just slow response from worker?

when the switch happens, the connection to the pool will be reset, as soon as your worker reconnects, it should reconnect to the new coin.
Are you sure you didn't failover to the other coin?

I dind't switch manualy,
after 2 mins the second worker switched also to NET.
Now everything is working..

Nice site. Signed up .. kimbo

Looks clean, and I signed up: ordomagus

Just a thought:  Would be good to have the option to straight mine LTC/BTC too.  There could easily be occasions when LTC/BTC is more profitable than an alt.

You can.

Can you point me to something that says how to do so?  I don't even see an option to add a BTC/LTC wallet address...

Sure thing.

Top right corner says "coin switch" click that, pick your coin, connect to the server listed.

To add a wallet, go to the "Accounts" tab

Does your drop down have LTC or BTC in it?  Mine has neither.  Nor a way for me to add an LTC Wallet nor a BTC wallet.

Hm...it appears not.

Currently autotrading to BTC & LTC is not possible.
This is on our todolist.

good job on the quick updates to the site Screenman. looks like the pool is gaining traction.

Well, the pool is supposed to mine the most profitable coins (according to exchange rates), but how did i get 40 Zedcoins??? WTF is ZEDcoin and why our miners burn electricity on shitcoins???

It seems that the estimate of balance value has been added. Thanks!  Any chance you could add a total value at the bottom, and maybe force all individual values to be in decimal format?

It was released today. I'm not sure why you'd be upset with getting in on the first few hours of a coin launch. Worst case, they are worthless and you are correct. But...even the worst coins released recently have been profitable to mine if you got in at the very beginning when difficulty was low.

But not all of them get on exchanges, and i don't see ZED added anytime soon. For me it's wasted electricity........

it mine coins with less difficulty ? because most profitable coins are tag an doge, but it mine fastcoin and lottocoin.

Good point.  It appears the algo is setup to mine lowest diff rather than highest profitability.  Great site, other than that

but I need mine and sell, or mine and keep. But lotto looks near its end. I had problems sold cinnamon, because nobody want it even cheap. one trade per hour for low rate-dead coin. Site is great, nice looking, but they could make another option for really most profitable coins.

The multipool has mined less than 15 minutes on this coin.

Some extra info about the switching:

Currently the pools hashrate is to low to mine tag & doge, at the current hashrate it would take days to find one. As the hashrate goes up, we also mine coins with a higher difficulty. This to be sure that we can find blocks.

ahhh, makes a lot of sense then screenman!

All of my Doge pools are 200%+ estimates currently.  Seems like no Doges want to be found

the difficulty is to high :(

Reserved.
have i 0% fees?

signed up, jonluk.
Not enitrely sure about some bits. Where can I set the difficulty for my workers ?
How is the 'best' coin worked out - I seem to be mining something that I can't see as more profitable than btc.

On the homepage you have in the right bottom corner a table with the proffitability of each coin.

The difficulty for each worker will be adapted automaticly when you are mining

https://i.imgur.com/7C7xiCG.png

 ???

we take also the difficulty & the current pools hashrate to calculate what coin is best to mine for the pool
if the difficulty for a coin it to high for the current hashrate, we take the next one in line. This is because else the pool would waste hashrate to earn notting, and now we can be sure you actually will earn coins

Makes sense!

might be nice to see some stats on a per worker basis, other than that it seems to be working quite well.

We are working on some more advanced statistics, that should help!

I second current suggestions.  I'd like to see stats on a per worker basis, even if just hashrate per worker. 

On your worker overview page (where you can add / edit your workers) you can see now the hashrate for each worker.

I stumbled on your pool and figured I would give it a try. I registered under ctcgred if there are any 0% pool fee tickets still available.

Thanks. 

Is it planned to implement auto-exchange?  Where we can exchange all alt-currencies over to BTC automatically?

this is on the todolist

excellent!

you are doing a great job!

this pool deserves to grow  ;)

ps: in section "Balance" it is possible add a column to indicate "SHA" or "scrypt"? or better yet split?
I need to understand how i generate with asic and with gpu, thank you!

Ok! i will fix that, like i did on the accounts page etc ...
thx for the idea!

The overview on the balance page is now split up in scrypt & sha-256 :)

very nice selection of SHA coins. best I've seen yet on a coin switcher pool. I can't wait to see the results.

the layout and stats page are easy on the eyes too. i'm impressed so far. looking forward to some good earnings too, i hope.

-k

Thank you! if you have suggestions, just contact me!

FRK Franko has been added to the pool http://www.megamultipool.com/frk/ + it has also been added to the autoswitching pool

just joined, beler is the nick. This looks really promising will staz for a while at least :)

Wow, nice job!
Switched today from Multipool. Less timeouts, less invalid shares, NICE!

And the site looks really nice.

Hope you can manage more Users...which definitely will come..

btw: tobicool is my nick ;)

What do you think of add the ability:

- Automatically exchanges coins for bitcoins, and pays miners entirely in bitcoins.

is complicated? useless?

obviously applying a fee for it

This is on the todolist :)

 ;)

I second this. Middlecoin is the only pool that does it. And they guy that runs it doesn't even talk to the people. He does a good job but thats it lol.

Im in 8)

The guy from middlecoin is too busy counting his profits to be bothered with forum support. ;)

Exactly! its mindblowing no one else has done it and done it BETTER!

Cool site screenman. Any plans to add Peercoin?

+1 for Peercoin

Regards

All our members can vote for new coin support:
Check out https://www.megamultipool.com/vote-for-coins/

I registered under granitepeaker.  Hoping there is still some 0% pool fee availability left.  Thanks!

Is 0% promotion finished?

yes, we are over 1200 users now!

It really is. Truly.

Hi guys. i joined pool fed days ago and its great. I just cand find how much are withdrawal fees...i noticed i have a bunch of diferent coins on my balance.
Knowing withfrawal fees would greatly help on managing auto payment amounts for each coin.
Anyone great pool and big +1 from me!! :-)

withdrawl fee is the coins default fee, you can see those fees in the transaction log

Auto-conversion of currency is something I would like as well.

Just an option you can sign up to. Say scrypt -> LTC and sha-256 -> BTC.
Then you can exchange pools holding of whatever altcoin for us at once somewhere,daily or weekly, maybe keep another 1% comission but no other feeds.

You would make money on the conversion, and we would save, and save on withdrawal fees.

For a higher fee you could exchange on demand, but still at market price after you have done the exchange. No risk for you.

+1

Really liking the pool, running strong for quite a while now. Seems more profitable than mining btc

i havent really spent much time going over the site this week. but now that i have, great job Screenman!! i love how you are taking requests and trying to implement them. keep it up!!

Its on the todo list, we suggested it earlier :))

been active for few hours with megamultipool, at first i feel it's same like other pool, always and always late displaying current speed from my worker, but then, hey, it doesn't really matters because the rally matters is when is see [yay !!!] at my ssh (if you know what i mean). my worker is working for everything they can get. compared to single mining crypto, i think i'll love this concept even more.

if you still have 0% fee, appreciate it if you set for my account. same username as this, manusiabumie.

stratum is only updating the shares a few times per minute to the database, also the mining hashrate is based on the last 300 seconds. That is why there is a delay on showing the hashrate. Nothing we can do about that i am afraid.

For the 0% fee, i need to disappoint you, this was only for the first 50 users, we have now more than 1700 users already

I'm in!!!  ;D

Just switched today from multipool. Like the nice clean interface and much quicker payout, and finally a pool founder who is easy to communicate with and really putting in the effort to grow the pool. Much appreciated

Still I have my doubts about the hashrate.
I am mining with:
USB 2 GHs
RIG 4 GHs
RIG 5 GHs
RIG 60 GHs
Sum: 71 GHs
(and 2 scrypt miners, but thats not so important for my complain)

When I mine at BTCguild, the sum is +/- 71. Sometimes higher, sometimes lower. E.g. sometimes 68, but also sometimes 75, depending on different factors.

Today I put all my miners to multimegapool for 6 hours.
If I look on the worker page I still miss an average of 10-15 GHs. I never reached my 71, the highest was 61.
I can imagine, that with switching the average differs, but in 5-10 minutes it must reach minimum 70.
At we speak (now) I put back tot BTCguild my slowest miners and let the 60 GHs rig on megamultipool, just to be sure.
After hours of watching, the maximum is 54.9 GH/s.  The rig provide with other pools between 57 and 65, not lower!!!
The average now (03.11 29jan2014) is 50,5 GHs. With only the 60 GH/s rig I miss 10 GH/s.

So I have my strong doubts about this pool site. Maybe the owner can explain something for the forum readers ??
The user is yelloyello, so maybe the owner can take a look in the logs.

Update:
for the first time the 60 GH/s rich shows on the worker page 59.55 GH/s. But thats for the first time in 7 hours.
(just to be complete in my story..)

Hi,
Thans for your remark.

The hashrates on the site are calculated, based on the coins difff, the numbers of shares we receive, ... it is not 100% correct. The real hashrate is the one that you see in your mining software. i will take a look to the hashrate calculations when i have finished the autotrading part.
The display of your hashrate doesn't affect your earings / shares / ... it's is only shown for your information.

is the hashrate in the topnavigation correct? or it that also missing some ghs??

Please let me know

thx

Scrypt hashrate is displayed correctly (for me), i have 2 MH and pool shows 1900-2100 KH. Maybe is just an issue with SHA-256.

Indeed, scrypt hashrate was correct. That was not my complain, but I can tell there is no problem with that.

With the SHA mining, also at the top bar navigation there was a wrong GH/s sum. I know that hashrate can differs.
But I was wondering why it was 8 hours long permanently lower. I never seen that with other pools.
Also the sum of the mined coins was (for my feeling) correct with the displayed hashrate.
(for example, I mined many days eMarks with 60 GH/s so I can compare a bit)

So maybe Megamultipool can take a close at the technical part of the pool?

Ok thx for the input, i know where to look now!

Hi

I can see you are starting to build the auto trade system... Looking nice.

Just one thing... perhaps you need to allow "0.01" values on BTC and LTC values, a mid-size sha256 rig, will take quite some time to make 1 BTC  :)

Could you guys also look at the vardiff settings? I really don't see how my 35 BE's need to be at 64 or 128 diff, especially on the low diff/fast block time coins.
Think this is having the largest impact on my efficiency, I really don't see how that worker with those should ever get beyond 32 diff.

Is there any word on the auto trade option, I read that only few users have that capability. Is there something we need to achieve to unlock that feature, are there any timelines on the launch of this feature for the common man?

Sorry to bombard screen, but you getting any US servers anytime soon? I ping 130+ here :/

After we launch autotrading we will focus on adding new servers in the US & maybe in Russia

I am now writing the faq for autotrading, first that needs to be finished before users can use this function, else my mailbox will be flooded with questions :)

Always up to help you as long as it helps to introduce the feature first, if you need any help on the site don't hesitate to PM even if it means content writing is involved:)

Autotrading registrations are open: https://www.megamultipool.com/autotrade/

Looking Nice, but don't you think you need support for below 1, e.g. UNO coin. 1 coin will take quite some time to mine

Perhape 0.1 on some coins, and 10 on others.... ??

and also in payout, I think alot want to cache out before 1 BTC

You can enter 0.001 as threshold as well

not on UNO, getting a fly-over with danish tekst telling me that the value must be 0 or 1... (and tested on BTC payout)

try again, seem that chrome & opera need some extra html to allow decimals

That did the trick...  ;D Working fine now

I have a request & hope it makes sense.
although profit switching pools are great for maximizing returns if you have no faith in altcoins & only looking to convert to bitcoin, I would love to see a difficulty only, switching multipool that does not take into account the current market price of a coin. I'd rather mine a set of  solid coins that just suffered a drop on cryptsy with low diff than only the top performing coins, I think we'd get much more coins that way. I've been trying to do this manually, but so much work & I can't sit in front of a PC all day doing this! What do you guys think?

We only mine coins in with the megamultipool autoswitch pool with a diff lower than 20 and have a good market value, we have a autotrade option that automatically trades your "altcoins" to bitcoins. You mine & we send you bitcoins :)-

Hi Mr. "screenman" , i signed up and i have sent to you a pm for my account name fo have the zero fee promotions!

Thanks in advance!

That's cool, so I won't be forced to mine doge then! Won't use the auto trade feature but a good option to have ofcourse, thanks!

Hello,

Please help me to setup autotrade future, i am confused of what should i put in Auto Payout / Trade Threshold window, should i just put 1 next to each coin or i have to enter a minimum amount like 0.001?

Example if i will put 0.001 in LOT the 0,001 would this mean that as soon as i reach 0,001BTC in LOT it will be autotraded? Or it will be counted as 0,001LOT?

I am asking because i enabled the autotrated about 8 hours ago, my estimated balance shows 0.00248763 BTC but nothing was traded yet. Please help.

I set my account like this, please see screenshot

https://i.imgur.com/DVjrS41.jpg (http://imgur.com/DVjrS41)

Is it correct? No coins been autotrade so far.  :-\

Wow, Very best way to mine...

bit_user, the auto payout/trade treshold should be set to the number of coins that you are mining you want to reach before the autotrading function or auto payout kicks in, its not to be set as a bitcoin value. so for say doge, you probably want to set it to 1000 or higher depending on your hashrate. make sure you also click the button at the bottom of the autotrading tab to enable autotrade as well.

the way you currently have coins set to 0.001 is not going to work since that is way too small of a value for pretty much all coins. check a site like cryptsy.com to see what the minimum trade for each coin is & remember there is a transaction fee for each transfer so IMO, you probably want to do no more than one per day...

Just a heads up, on the "Accounts" page the word "directly" is spelled wrong in the sentence under "Payout Settings". Does pointing this out qualify me for 0% and auto-payout (shortkut)?? Haha, thanks -- I'm loving the pool so far.

If you set it all to 0.001 autotransfer will ony start when your confirmend balance has a estimated value of more than 0.001 btc or ltc (0.001 is the queue size is big enough)
Transaction fees are not per user for trading, but are split over all users that are in the queue with you.
So if there are 50 users who have some coin in queue & the transaction fee is 0.0001 in total for the 50 users together.

So the settings that i posted on a screenshot earlier a correct? And all the coins are estimated in BTC or LTC value? What would be the UNIVERSAL minimum value that i can put in Auto Payout / Trade Threshold for all coins for autotrade function to work properly?

Please can someone post the screenshot of https://www.megamultipool.com/accounts.php with correct settings.

You leave it to 0.01, as soon as some confirmed balance reaches the minimum to trade (0.001 btc/ltc normal or 0.0001btc/ltc when big queue size) your coins will be traded

But maybe you better change your btc & ltc threshold to 0.1 (because when you do a payout of your btc or ltc, you have 0.0001 transaction fees)

lol, really? im confused!

Why?

We transfer funds of all users that have enabled autotrading in 1 time, so the transaction fee is split over all the users

I'm confused about what number to put in the auto payout / autotrade threshold box.
Let's take lottocoin as the example.
I would assume if I place the number 10000 in the auto pay out/auto trade threshold box & do not enable auto trading, once I mine 10000 lottocoins, you will send 10000 lot to the address I specify. Yes?

If I use the same numbers as above, but enable auto trade, what happens?

By the way, you have a great site & pool going, it looks almost too good to be true, lolz! :) moved my miners over last nite, I doubt you have any more 0% spots open, but the username is 1369 just in case!

As soon as your balance reach 10000 lot (and assuming that 10000 lot is more than 0.01 btc) autotrade will start for 10000 lot

Sorry :) We are over 2800 members now

scrypt switching pool down? getting stratum errors since almost an hour

seems to be up now though  ;D

not for me, still unable to connect. Anybody confirm?

autoswitch scrypt pool is dead for me... both 80 and 3354 ports

all my miners are now connecting.

Hi,

We like to inform you & apologise us for the problems we had for the last 6 hours with the scrypt autoswitch pool. Due to the massive intrest in our autotrading platform and the intrest in megamultipool, the stratum server was unable to respond on all mining requests. It seems that in a timeframe of 3 hours, we had almost 500 new users, connecting more than 700 extra workers. We didn't expect this kind of growth in such a short timeframe.

It took some hours before we found the problem & found a good solution. Mining our scrypt autoswitchpool should work again without any problems. We had 1 stratum server, now we have enabled 10 stratum servers. This to handle the current load & have a big buffer for the upcoming days.

Next week we will add even more stratum servers in the EU (Amsterdam) & we will also provide stratum servers in the US (West & East coast) to prevent downtime & capacity issues

We know that we can't apologise us enough for the loss you had this morning, but 15 days ago, as we launched this site, we didn't expect to grow that fast.

We hope you didn't lose faith in us, we try to offer you the best service as possible, if you have any question about this issue feel free to send a email to support or jump by in our chatroom


Kind regards,
MegaMultipool.com

still no luck for me .... scrypt autoswitching pool

[2014-02-02 16:39:34] Starting Stratum on stratum+tcp://scrypt.megamultipool.com:3354
[2014-02-02 16:39:34] 1 miner threads started, using 'scrypt' algorithm.
[2014-02-02 16:39:36] Stratum connection failed: Failed connect to scrypt.megamultipool.com:3354; No error
[2014-02-02 16:39:36] ...retry after 15 seconds

try port 86 but normally 3354 should work as well

thanks, 86 is working. Will this port stay enabled or is this temporary?

it will stay, but normally the others should work as well

growing pains... keep up the great work Screenman!!!!

I will be here when you get your US Servers :)

im also looking forward to US servers, not getting quite the hash all the way from los angeles. I LOVE what you guys are doing tho, & keeping my bitcoin hardware connected to mine your sha-256 coins! thanks!

east us server is ready, waiting now to deploy to west us, as soon as that is done our us servers are open for public :)

ahhhhh!!!  ;D ;D

Wohoo! Just added a couple more 290x babies to the farm & looking forward to west coast action!

seems the scrypt server is down again  :o

Since the last 10-15 minutes miner has been waiting for work from the pool! Seems it's all down for now!

Seems that the worldcoin daemon losts connection to the nodes. Problem is fixed now + i have build in that the pool does not switch when there are less than 2 nodes connected

The EAST US Scrypt autoswitch is pool available @ stratum+tcp://east-us.megamultipool.com:80

The EAST US SHA-256 autoswitch is pool available @ stratum+tcp://east-us.megamultipool.com:5000

We are still waiting for the west us server.

Is that normal vardif to give me 1028 diff at 1.8mh power?? I thing its so high number.. 64 and 128max will be good but 1028 is so much!

normally it should stabalize at a normal diff for your worker, let me know if it doesn't than we need to finetune the settings for the diff changes per worker.
Currently the settings are 100% the same as on the eu server

I find this since day one I mining and really thing its a fine tuning job not yet done. I have many rejects at this diff, other pools give the jobs on 32/64 max at this hashrate and almost no rejects(0,3-0.5%), at moment is 256/512/1028 rejects are 4-5%...

i will take a look

Most profit switchers will have a high reject rate of 5%

When the pool switched, you will have rejected shares, that is normal. But after the switch, the rejects should be low

looks like my hashrate is reporting more accurate on the new server. previously it was about 100khs+ off now its right on.
at any rate things are looking good on the website. very happy with the autotrading since cryptsy is banned on the work computers..... >:(

does this pool give you the accurate amount of coins that you should get depending on your hashrate?

we don't have a estimation calculator yet, this is on our todolist

tried your pool for 2 days .. huge difference, i got like 50% less doge compared to other pools.
So i tried your multipool system .. even worst.

Im out, and im not coming back.

We have a big warning on top of the doge page: https://www.megamultipool.com/doge/ to inform you that the hashrate of the doge pool is way to low to mine doge on our pool.

Could you guys add Coino to the new coin voting page pls. I mine it on the side, but would rather give you guys all my hash & auto mine it when its profitable instead! ;)

A unicorn showed up at my house after I started mining at megamultipool, kinda freaked me out, but I'm still in.

do you pet your unicorn everyday????

Giving the pool a shot.

Could someone tell me what I would get pushing about 16MH towards this pool using the autoswitch feature.  Anybody w similar setup care to share.  Thanks

multiple times a day, using both hands....

scrypt or sha-256? im guessing scrypt, i havent mined long enough to give you a comparison w the other multipools, but what i like is they focus on coins with lower diff, i have my hash split between these guys & that multipool that ends up giving you mainly doge.

im mining scrypt right now, WDC at moment, but thinking of switching.  I like the idea of multi pool, just trying to get a grasp of profitability compared to what I'm doing now. 

screenman, just out of curiousity, whats going on with XNC,ZED and CCC? are they going to be part of the rotation or just non-multipool mining?

maybe they're not profitable enough for us to mine, just my 2cents

I always watch coinwarz and why doge is not mining even though it is still highest profitable in all coins of mega multi pool.

when you open doge page at megamultipool, it says :

Dogecoin: We like to inform you that the dogecoin difficulty is very high! The best profit you can earn is with our multipool auto coin switcher pool

maybe screenman can confirm this..

================================================================

the only thing that concern me is something like this
http://i767.photobucket.com/albums/xx311/manusiabumie/wheresthefund.png

can you tell me what's going on when i'm using your autotrade?

very likely.

If they are tradeable @ cryptsy or listed @ coinwarz they jump into the switchpool

that's cool. I guess it helps with the auto trading if they are listed on an exchange  ;D
keep it up Screenman, you are doing a great job with the pool.

Will the site autotrade the current coins I have in my account now that I enabled autotrade? Cuz it seems like it hasn't yet

Cool site.  Going to join and test it out.

What's your thoughts on adding new alts?  I am really liking Coino and Mintcoin

I had some coin that sat in my account for a few days that were being autotraded. I think its because the exchange has to have buyers for them. maybe im wrong, but I think the pool sells the coins as a whole, i.e, all the ASC from all auto traded members at once.
someone correct me if im wrong on that.

question, i got a few email notices that my miners had not been submitting shares for the past 10 minutes (great feature btw) but when i checked they were working on my end & also showing up as active in the workers tab on megamultipool.com, after a few hours tho a couple dropped out on your end. any thoughts on why it's happening?

i noticed that when the pool switches the notifications can be wrong, i am fixing this today

Noticing that my reject rate is very high 17-20%  what gives??

Running BFGMiner on a windows 8.1 machine connected to three BFL singles 60ghs each...

thoughts/help would be greatly appreciated.

thank you,

dsy

I've been checking and noticed that none of the coins mined have been auto traded. Been like this for days "Estimate BTC balance (SCRYPT + SHA-256):   0.00226213 BTC" The auot trade was checked on the first day I tried the pool.

anyone have an idea why my miner is getting temporarily banned messages all of the sudden on bfgminer? just seems to have started about 30 minutes ago.

im still getting dropouts & failovers to my backup pools, multiple times a day, let us know when you have this figured out & i'll drop more hash into this otherwise fabulous pool!

Hi 1369, you mine the scrypt pool? us or eu?

Just wanted to chip in with my 2c. Pointed 1.6 MH towards this pool, and an equal hashpower towards a DOGE pool. Over the past 24 hrs, got 7622 DOGE (slightly more than the estimated 7500 taking into account lower rig power at night), which translates to roughly 0,021 BTC at current Cryptsy rates. Over the same period, I earned a measly 0.0047 BTC in the coins that auto-sold plus an estimated of 0.0025 BTC in unsold coins at MegaMultiPool.

Summing up, mining DOGE directly I got 0,021 BTC while MMP gave me 0,0072 BTC over the same period - a third of that! Plus the uncertainty whether various altcoins I've been mining at MMP will sell at all.

The idea is great, the UI is great, autotrading makes a lot of sense... But in my case it simply doesn't work well. Perhaps MMP should only switch coins every few hours and sell them right away when they're still profitable rather than queue people up..? As I see it, the current way we end up with tiny amounts of each coin that is below the autotrading threshold and see our predicted profits drop after a coin switch.

Edit: just realized this is less than half of what I'd get mining even LTC directly (0.6074 LTC over 24 hrs according to CoinWarz vs ~0.2820 LTC I earned). Guess I'll be looking for greener pastures elsewhere... Have any of you done any apples-to-apples comparisons (ie. same time, same hashpower MMP vs something else)?

As from 2 hours ago we have switched the profit calculations. We have noticed that what coinwarz says is not always the correct thing. I hope to have some results in the next few hours to get a good view on this change that we have did today

been a number of days for me and I haven't seen anything autotraded Or a response to my last post. Probably won't be going back

Did you mail support?

Did you fill in a autotrade threshold? set it to 0.01 and trading will start

my unconfirmed balance has a minus (-) in front of it.  any ideas? haven't seen that before.

Thanks, that seems to have fixed it. Now, I have auto-trades in the queue.

there where some pxc, bqc & alf autotrade orders credited 2 times on 9/2, and we just corrected this problem.

If you want a detail overview send a mail to support and i will mail you the overview

Screenman - currently have 150+ghs pointed at the sha-256 but am receiving over 20% rejects using either BFGMiner or Multiminer (GUI)...I have another 800+ghs that I'd like to point at the east-us server but am not sure if it is better than mining with Slush pool directly given the number of rejects.

thoughts, advice are greatly appreciated.

thank you,

it is possible that you get reject when the pool switches but after that is should stabalize. You have rejects as well then?

All boxes are checked, auto trade enabled. I'm under the same user name Scyntech. I'll send a message via the support function on the site.

include a screenshot of your balance page & your accounts page please

sent, they be direct links to the images.

Screenman, yes I consistently have rejects even after the pool switches.

i just pointed my rigs to the us server to check! i keep you informed!!

can you try port 5002 on the us server?

I just made the change to 5002 and have much higher rejects through that port 58%, 43.4% and 28.3%; there is something fishy going on here.

we have pool stats: on the homepage you can see the btc per hour per ghs for sha
and we have stats for each round on https://www.megamultipool.com/switchpool/ (i will need to change the total there by the total btc per ghs/mhs ) that is on the todo list of today

Hey screenman, love the site and concept of MMP.
Just trying you out and keep getting booted from EU sha server after a few minutes of successful mining.
Using knc equipment.
Any suggestions please?
Cheers B

what did you enter in the knc interface?

stratum+tcp://sha-256.megamultipool.com:5000

& your worker name & password

that should work

yep, tried us server too, and port 5002.
It works briefly, accepts work etc then I get a JSON auth failed null error in bfgminer
thanks

what is your username, than i go check all the worker databases but normally they are all in sync

thanks it's bizzyb.jupnovald

try again please

Thanks, whatever you did seems to have worked  ;D

Hi, I was just wondering why the autoswitch pool isn't mining ASC (ASIC coin) which appears to be 30 x more profitable than the current coin UNO (Unobtanium)?

Thanks!

B

The scrypt side is working exquisitely well! I have stopped looking at rejects too and that I do not do on a multipool ever!

true! but not sha256....for example at this moment why mining BCX (BTC/Hour/Ghs 0.0000009800) and not ASC (BTC/Hour/Ghs 0.0000252400)?

ps: you are doing a great job, compliments!!!

there is something wrong with the display of the asc / btc / hour stats :)
that is why you see that, trying to figure out where the calculation goes wrong

For anyone using KNC equipment for SHA coins.
Using BFGminer lost me about 40% of my hashing power, and 4+% HW errors.
Using CGminer I get pretty much the hash rate I would expect and sub 1% HW errors.

Doing a 7 day test; first 24 hours didn't hit my expected target (For the reason explained above), so far, 14 hours into second 24 hour period and performing well/as expected.

No payout as of yet, but I assume I have just missed the 24 hour payout schedule.

i am just going to transfer the btc funds from the exchange :) your first btc payout will be a fact very soon :)

Received with thanks  ;D

Any way to institute a minimum difficulty threshold? Bitfury rigs have issues with difficulty settings below 32ish. A couple of my rigs keep stalling out.

Normally the diff is recalculated every 30 seconds, so after a minute and a half you should get a stable diff for your rigg.
I you have problems with a certain coin, just notifcy me than i go check the config

looking to see what people use as the threshhold for autotrading.

if i understand correctly, if my autotrade is on, but threshold is set to 0, those coins will never be traded, right?

That's what I've found.
For my SHA coins I put them all at "1" and tick the box.
Seems to work well.

Hi

i was extremly lucky mining Doge at your pool

i realy like megamultipool with this user interface and the auto trading
very impresive website


how long till you fix your doge pool ???

Hi. What is the average BTC / MH / day in this pool?

On closer inspection it appears that the hashrate(and difficulty) on some of my bitfury rigs is dropping off if/when the pool's "Findblocks" status indicator turns red. Some of them are failing to recover even after the process has been reset on the pool and the hashes are instead being sent to a backup pool.

In the OP you offered to forgo pool fees for early adopters. Is that offer still valid? I like the interface and could aim significantly more mining power(THs) at the pool.

 

Megamultipool.com (http://vardiff.com/pool/megamultipool-com/) was added to my altcoins and mining pools database.
Good luck, miners.

  I would also like to know that about the sha, I wonder if mine here has more profit than in btcguild, for example.

Hi, the site and all is great, but running with 1 TH/s sha-256 is actually giving me half of BTCGuild.. Will stick for another 24 hours, but crunched the numbers a bit from the last 90 switches or so, and it seems quite difficult for the pool to get above BTC mining here. The number of sha-256 coins is a bit limited, some well performing ones are not there (yet). For me personally coinex was more profitable, but I like the autotrading.

Perhaps add a bit more coins like CTM, PPC, OSC, BEN.. can help out there, or just add P2Pool BTC if all altcoins are lower than BTC?

But how about mining these 2? I don't see them on your list? In SHA256 sometimes BTC is more profitable than others...

I have a question that I'm hoping someone can help me with? I'm trying to figure it out myself, but I'm just getting more confused.

I mined for a couple days and made some coins. (ASC, BCX, BET, DEM, FFC, TGC, TRC, UNO, and XJO)

Am I better off trading these into BTC and LTC or hold on to them?

Would I get more if BTC was worth more than it is now?

Thanks for the help in advance.

Sometimes is better to wait, sometimes to trade them for BTC, depends on the market move... no one can advise you here in the right way because no one knows what happens next hour or next day on the market! However, it is good to have some more currencies than just one, but finaly you must use them and exchange for some BTC or fiat currency... Or just trade/invest and make an investment portfolio with Bitcoins, as I don't think other currencies will ever be more powerful than BTC.

It is said that BTC is Gold and LTC in Silver  :)

Nice looking site  :)

Requested password reset 12 hours ago - no response as yet..

I've been mining ZET and UNO today with about 190 Gh/s. I got some ZETs but my UNO balance is still 0 after several blocks have been found. Is there a delay or a problem updating the balance?

I will try your autoswitch pool if you add bitcoin. Before that I doubt you can exceed bitcoin mining profits.

EDIT: My UNO balance has now been updated.

Bump

Is there anyway to get this to not switch over to failover on coin switch with cgminer 3.7.2. I cant seem to get 3.5 to run stable on my computer

My 2 ASIC blades are supposely mining on the megapool site and via stratum proxy protocol.  However, only 1worker activity seams to be showing on the "worker" status tab of my account on megapool.  I am doing some incorrect setup?  Is it that the mega site only sees 1 worker tread connected?

I also tested going directly to the mining URL/port...but my local hash rate dropped significantly.

Hi are you most profitable coins for SHA256 definitely correct?
It shows as ASIC coin being about 50% more profitable than BTC atm, but coinwarz & coinchoose disagree.
Please advise?
Thanks

Not sure about all my rejects ??? This is after about 30+ min I guess.

What do you guys think? Anything I can try? No overclock or anything.
east-us.megamultipool.com:5000
https://i.imgur.com/KpwXlHn.jpg

I tried another pool after about two hours and no rejects. I want to stay on MMP though!

For those of you that have autotrade enabled, how have your profits been? It is worth it?

I use it for SHA, its less hassle than trading yourself but not as fun!

not as profitable as mining brand new alts but also not a risky.

I cant get Scrypt to work though, CGminer just wont run on that site, no problems anywhere else.

8/10 for SHA
0/10 for Scrypt (if it worked it would be an 8!)

Site down for everyone?

Yes the sites down, but mining is still going through.

no its not.

SHA256 mining is down for me, had to go to backup pools. Wonder what is going on.

Well looks like its back up and good to go  :o   

Any word about what happened?

Anyone else having a login issue on the website? I was able to login fine early in the am this morning, but now i can't.

me too can't login today but I did check my account 10hrs ago  :(

Anyone else having issues with balances (not) being updated?

I've been hitting CGB and MZC (both BTC payout) for the past 2 days with no change in balance. The strange thing is that my ASC (LTC payout) balance is going up still...

Stranger still, MMP is showing I have been finding blocks, so it just appears that I can process blocks ok, I am just not being rewarded for my efforts at the moment.

I can't seem to find any info about this on any forum, Twitter, or the MMP site itself. Anyone know anything?

Hi everybody,

I cannot connect to the scrypt autoswitch neither on 80, nor on 3354, regardless of the mining software I use.

I'm facing this issue since weeks, is there any solution ?

Any idea ?

Jofo

I'm having this problem too. Although I have no problem when I try to use the SHA-256 switching pool.

You having any problems with accessing Scrypt pools manually? Or scrypt balances ever updating/showing up on a mined coin? I seem to have run in to this with CGB recently...

Since the last 10-15 minutes miner has been waiting for work from the pool! Seems it's all down for now!

The share difficulty of my miner is too high! my difficulty ranges from 32 to 128! and having only 8gh/s that difficulty is too high, I need a lower difficulty, 4, 8 or 16 max.
I have already tried to contact support for this, more than a month ago and still no answer, I sent another message to support yesterday for the same issue. I can't mine on this pool if difficulty is so high I only have ten or twenty accepted shares in one or two minutes, on difficulty 8 (on another pool) I was used to having about ten or twenty shares accepted every fifteen or twenty seconds.

I am having this issue since yesterday. I have been mining TAG and ASC in the autoswitch pool but I can't see any increase in my balance.


I also have the same problems connecting to the scrypt autoswitch pools.

Any ideas?

I love the look and feel of this pool but I'm definitively moving my rigs somewhere else.

The repeated vanishing of hours of hashing results and the total lack of answer to my support requests are killer factors.

I found a solution for this last night - not sure if it will work for everyone but is working for me at the moment...
I simply swapped server from the US to the EU one. Bingo, I'm back in the game.

Obviously this won't work on single coins but solves the switch problem.

Unfortunately, still getting very delayed balance updates (days/weeks late) and a few coins that have been in "Sent to Exchange, awaiting arrival" status for over a week. Have logged a query with MMP Support and am awaiting a reply.

So many typos on the site... even on the email notifications.
Clearly, illiterate amateurs.

Edit: also, thieves.

yeah, thats too bad. I gave up long ago... but I've since opened my own MP now  

vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

So what's the status of this pool?
Forgot I had an account here and logged in last week to clean it out only to find out nothings left and it's all still sitting there a week later.
Emailed Admin no reply.

The pool seems to be on auto pilot with subsystems failing one after the other.

Over the weekend the multipool locked in on the Luckycoin for two days without a break.
The multipool hashes still with over 200MHs what is a bit surprising considering the overall status of the pool.
For the Luckycoin blocks were generated and payouts were visible on the block chain.
Today it seems the block statistics for the Luckycoin are not updating any more.

Everyone interested mining the Luckycoin please consider moving to the Luckycoin pool: pool.luckycoin.cc (http://pool.luckycoin.cc)

Today the multipool mines BBQ coin, but there is no difficulty increase visible, so likely all the hashing power is lost.
I couldn't find a BBQ coin block explorer any more to look at it in more detail.

So I wonder why the operator is not handing over the maintenance of the pool to someone with more time at hand and support his creation.

I'd be happy to take ya'll over on my multipool:

www.xpool.ca

https://bitcointalk.org/index.php?topic=650952.0

Cheers!

im going to swap over and give your pool a try. this MMP dev has stopped caring or just to busy elsewhere i guess. i dont even see that im mining anything on the website stats.

thanks, I'm also running http://btcd.xpool.ca

where did this site go?

To mexico for a long vacation???

who's the owner?

removed by me

site is OFFLINE

yes it is... I'd be happy to welcome miners to my multipools:


www.xpool.ca

www.bitcoindark.ca

Cheers!

Please add Neutrino. Here are the technical specs: http://www.neutrinodigitalcurrency.com/neutrino-specifications

Thanks!