Show Posts
|
Pages: [1] 2 »
|
Anyone got bios and settings for Sapphire RX470 OC 4GB Hynix ?
I currently have mine at 1375 straps up. Auto GPU with slightly lowered voltage tailor made per card and 1900/1000 -i 4
Getting between 165 and 180 sols.
|
|
|
You stupid miner cunts.. You dumping the coin to make a quick profit ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Stupid assholes.... Well done you made 20% Cryptocurrency or whatever pool told you to mine said was profitable.. They are big companies owned by BTC holders and you sold your hard work for nothing.... Idiots !!! Mine and hold for the rich and famous :-)
|
|
|
A message to all miners.. This is a community coin not some corporate coin that takes 20% of everything you mine. Take your time to sell these coins.. DONT DUMP THEM !!!
We can try and raise the price therefore making better profits... This coin has the potential to be close to the same price as Zcash...
I'm mining and holding these coins until they reach at least 0.1..
Would be silly to throw them away now for next to nothing, you will be kicking yourself later if you keep dumping them..
I'm not losing my faith to this coin.. Yes I believe that it will going to reach 0.1BTC Thats good. You will be happy you did. The price is only going down because BTC is going up.. All alts go down. People start to panick and sell everything.. This is a bad decision.. Then they try to buy back when the price goes up.. I have seen this many times before. If you want to make money mine it and hold it.. dont try to sell it lower then the next person.. in the end you all lose. Be a winner for a change :-)
|
|
|
A message to all miners.. This is a community coin not some corporate coin that takes 20% of everything you mine. Take your time to sell these coins.. DONT DUMP THEM !!!
We can try and raise the price therefore making better profits... This coin has the potential to be close to the same price as Zcash...
I'm mining and holding these coins until they reach at least 0.1..
Would be silly to throw them away now for next to nothing, you will be kicking yourself later if you keep dumping them..
|
|
|
Sampled v6 on my rigs:
290x at 166-168 H/s - speechless!
R9-390 at 177-180 H/s - OMG!
RX 480 at 140-142 H/s - best improvement since v5.
R9-Nano at 191-194 H/s - OMG x 100 !
Bravo Claymore!
Those are very nice speeds. Compliments to you and Sir Claymore !! RX470 OC 4GB - 148h/s to 150h/s modded bios and sweet spot settings
|
|
|
I like the idea of this. Its the way Bitcoin was done.
1) No slow start bullshit to kill price discovery 2) No founders tax 3) No secret investment round 4) And no "company" minting off my mining power
Zclassic has a pretty big community for a coin thats 9 days old. People are gonna choose something because lets face it... the technology is pretty damn good.
The Zcash coin company (yes thats right. Company) had a private investment round that we "plebs" never had a chance to invest in and now they are going to flog it off x100 on us? No thank you.
The people have chosen this coin and I respect that. I do too.
Now lets get this baby on some larger exchanges next week so CCEX can stop crashing on high user load!
Bittrex anyone?
moonrock
Yes well said.. If someone knows how we can apply to various exchanges to get this coin listed.. please post the links.. I have already applied to Poloniex. The more people that keep applying the better the chances are that ZCL can get listed. Here is Poloniex request coin link.. https://poloniex.com/coinRequestThanks in advance
|
|
|
ZClassic ...Congratulations on your great and speedy work..
I too agree that ZEC devs are being unreasonable taking away 20% of every coin that is mined and traded. Plus pre-mine. I understand that dev's need to be paid for their work but it doesnt cost 100's of millions to develop this coin further.. It is one thing to cover your costs and make a decent earning but quite another when you rape the community that supports you and gets you off the ground.
I like it when people are successful but I don't like it when you get Ferrari's, Porshes, Lamborghini's, swanky New York penthouses and Malibu mansions at the expense of the people that form the community that supported you when you were unknown. We placed our trust in you only to be shafted.
The truth is that just like most other coins... The devs copy/paste from Bitcoin.. tweak a little add a name and then use the community to build that coins name. XRP (Ripple) is a great example.. Then when the company/devs get noticed by big companies, corporations and banks they forget about the community that helped them get there and sell off the technology behind the coin to get rich quick, while the rest of the community don't benefit from this at all. Man and his greed for money hey !!
Golem is another classic example of rich getting richer and poor not even having a chance to begin with. $8.4 million raised in 20 mins.. That money is our money !!! Worst part is they create a coin that they sell back to the traders for even more profit.. What a joke.. I guess the sheeple are easy prey...
Anyway the way I see it is like this.. When ETH goes POS and can't be mined by people like me and you.. the mining power will go to the next 3 most profitable coins.. ZCL and ETC and ZEC (in no particular order :-)
The hashrate will grow exponentially and at first at the current prices it will be unprofitable to mine so the correction will force the price up.. Lets hope that price increase will go to Zclassic in support of the miners and traders alike and not more money in greedy ZEC dev pockets..
The community has many times stood together and every time come out on top.. This will be the same. Mine those Zclassics or Zickles and hold them.. miners don't dump them... and let us, as a community, make some money together to be shared equally for our efforts
|
|
|
Yes definitely being sarcastic with the "LOL" at the end.. Thanks Claymore for working now to bring us this new miner ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
Sapphire RX470 OC 4GB Hynix - 65 to 75 sols modded bios
Thanks Claymore.. You're the man !!
|
|
|
I have a problem with the fee !!!! It is NOT high enough ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I would gladly pay double to be able to use your miner. Thank you for your time and effort.
|
|
|
adaseb, First you write: For everybody that keeps repeating the same question over and over again...
HE WON'T BE RELEASING ANY NVIDIA OR LINUX VERSIONS!!!!
Later... Nvidia people are catching on.
- GTX 960: 26 Sol/s - GTX 970: 50 Sol/s - GTX 980: 56 Sol/s - GTX 1060 6G: 51 Sol/s - GTX 1070: 66 Sol/s
You are contradicting yourself. Or do you like to scoff at people? Maybe you're a masochist? )))))))))))) ------------------ Dear Claymore, waiting in our support for the miner Nvidia He refers to nicehash and a post in zcash forum not about claymore.. Disman = misinformed, accusatory, rude, ignorant, possibly physco, jumps to conclusions and well... have just shown everyone what an idiot you are. Thanks for playing.. next...
|
|
|
A really large improvement using v3.1.
Fiji: 85H/s (!) Hawaii: ~80H/s Tahiti: 50H/s
That is really great !! Ive got Sapphire RX470 OC 4GB Hynix Ellesmere. Please can you advise what bios and settings for these.. I'm currently using 1375 straps and auto GPU with lower voltage and 1850/875 Getting 55H/s to 62H/s version 3.0
|
|
|
Which exchanges are currently trading Zclassic ? I looked on Cryptrader.com but couldn't see it listed there.
|
|
|
Claymore is MEGA-monster! ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) RX480 4G with mod. mem timings = 70-72 sol\sec wich timings are you using? can you share the rom? thanks ROM (from MSI RX480 4G, only for HYNIX memory): http://hushome.com/img/patched2(1950stable).rom (click rmouse and select "save link as...") Overclocked memory from 1750 to 1950@1000mV (or 2000-2050@1250mV - this may damage your card) Result: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fhushome.com%2Fimg%2Fclay3.jpg&t=665&c=fTNjL3uod7aWyg) Thanks for sharing this. How stable is it ? Should work on Sapphire 470X OC 4GB (Hynix) right ?
|
|
|
Around 75 on the 390s (2 are running 80-82), 37-38 on the 380s, 55-60 on the 470s480s, and 62 on the 280x not bad at all. about 25% increase from previous version for me.
A bit off topic, but I have the sapphire nitro 470 I got (return from RMA)...and in atiflash it always fails....cant read rom. Unless claymore is running then it reads it and "pass". any ideas ? I want to flash it but so far the only way would be to flash it while its working....which doesnt sound too good.
I had the same problem.. puzzled me for ages. Some rigs it read fine others not. I worked it out that if you copy the ATI folder with all files and put it in downloads and run it from there as administrator it works fine.
|
|
|
Silent Army v3, Ubuntu 16.04:
6 x RX 480 8GB OC:
Total 280.2 sol/s [dev0 48.1, dev1 44.9, dev2 49.3, dev3 48.7, dev4 50.7, dev5 49.1] 579 shares Total 281.1 sol/s [dev0 47.4, dev1 46.1, dev2 49.1, dev3 47.7, dev4 49.6, dev5 51.2] 581 shares Total 281.9 sol/s [dev0 47.8, dev1 45.6, dev2 48.8, dev3 49.9, dev4 49.1, dev5 48.2] 583 shares Total 281.1 sol/s [dev0 47.8, dev1 46.2, dev2 46.3, dev3 49.0, dev4 48.6, dev5 49.8] 583 shares Total 281.3 sol/s [dev0 48.5, dev1 47.0, dev2 45.3, dev3 48.9, dev4 48.3, dev5 50.3] 585 shares Total 281.1 sol/s [dev0 48.1, dev1 47.2, dev2 44.9, dev3 47.4, dev4 49.6, dev5 49.7] 586 shares Total 280.9 sol/s [dev0 48.8, dev1 45.7, dev2 46.0, dev3 49.0, dev4 48.3, dev5 49.1] 587 shares Total 280.9 sol/s [dev0 48.1, dev1 46.5, dev2 43.5, dev3 49.2, dev4 49.1, dev5 51.0] 590 shares
Thats really amazing hashrates.. Well done.. Ive got RX470 OC 4GB Hynix.. Windows only.. Can you recommend settings as Ive tried everything but cant find the sweet spot...
|
|
|
Very excited about the release of the new ZEC miner.. Thanks in advance Claymore.
Ive got a question about the current miner version 7.3 and was wondering if anyone can tell me if there was any increase in hashrate from version 6.4beta , which I am currently using, as I do not want to go upset the apple cart if its not necessary. All cards are RX470 OC Hynix and was getting about 25mh before changing to ZEC with Extermal miner and currently getting 35 sols per card. Excited to bump it up to 50 sols ASAP :-)
|
|
|
Thanks for updated version.. works very well.. Im getting 35 sols on Sapphire RX470 OC Hynix. I have modded bios with 1500 straps all up. It runs very stable although I am using a .bat file to restart miners every 300 secs.
What I would like to know is what settings to use. For Ethereum I was using 1050/850 and 1850/875 but for some reason ZEC does not like this. It seems to prefer auto GPU. All settings that I have tried eventually cause the hashrate to drop to about a quarter. At auto GPU it is stable for days and no issues but with 4 x RX470 per rig it is pulling 1200w at the wall. Maximum for each PSU.
In one room I have 4 of these rigs with 4 cards and it is too much load on the circuit and trips at the board. I would like to find out if anyone has any settings that work for these cards so I can reduce power draw.
Thanks in advance
|
|
|
Yeah thanks. I flashed the cards with new timings and copied over the .sys file and used wattman to make adjustments. I can confirm 3 days mining with Sapphire RX470 OC 4GB at 25.5Mhs each. Total draw at the wall for whole setup with 3 of these cards is 470w with monitor off. 500w with monitor on :-) Best settings is core 1050/820 and GPU 1850/850. This is dual mining ETH and SIA.
|
|
|
for the xfx cards, I dont know, I havent tried with those. try setting -5mv to start and see if that sticks. For the other question, yes it is worth it, but if you've never done it before I highly suggest only doing it on a card that has a dual bios switch (like the sapphire nitro). there are many guides out there, in my previous comments I put a simple step solution to get it working. but bricking cards is real, hence the dual bios switch. and yeah its better to dual mine, but it uses much more electricity.
Thanks Fr4nkthetank... I can confirm that dual mining does not use any more electricity. Tested with a meter at the wall and both readings are the same at 570w. So I have decided to mine both Ethereum and Sia as I have worked it out that Sia will pay for roughly 60% of the electricity bill. I believe my cards do have dual Bios as they are the Nitro version however before I do that I would like to know if anyone has settings for this card that work. I'd prefer not to experiment and guess. Thanks again.
|
|
|
|