Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[TheMiningDwarf]

Am i the only one that does not like higher speeds?  If the new miner is faster and everyone is using the new miner then we do not benefit and our electric bill rises?  my stock 4gb 480s went from 42h/s to 54h/s

When we were on V1 -- lower fan speeds, lower noise, lower utility bill.  If i dont switch to v3 i lose profit -- but if we had all stayed on v1 -- we would all be better off

By all mean, stay on v1.
No one is forcing you.
Go to what to mine website and enter your old numbers and new ones.
You will know for sure hiw much you make per rig/version used.
For me i make more profit with v3 even tho it takes more electricity.
Plus its winter bere, heat my whole house for free lol

[Yerba]

Care to share this BIOS mod?

Claymore - 3.1 is way more stable.  Can even run on i2 now.  Thanks again.  Keep bring the improvements.

I have rx480oc 8 gigs get pretty nice speed, 80 per gpu
But if I use tge -i 2 i lose speed instead .
I have 16 gigs ram and virtual set to 32.
But weak cpu, just a celeron.

Is it because of my cpu ?
Thanks

What BIOS rom and settings are You using?

core, mem, vcore and vmem? i only can hit the 62Hs with my 480 nitro 8GB

All i changed is the mod bios from when i was mining eth
And the -mclock 2150
But as soon as i put the -i 2 in there speed drops to 60 sols per gpu

[antantti]

Yes I confirmed it after some research.

Your researches, they have something to do with recent nethash behaviour?

[bardacuda]

can some one with 7850 or rx 460 or r7 370 post results with claymore latest build please ? did they got also increase in hr or still stuck at 30 -38 h/s ?

Here are my results from an R9 270 @ 1000 core / 1375 mem, using -i 1

[AzzAz]

Am i the only one that does not like higher speeds?  If the new miner is faster and everyone is using the new miner then we do not benefit and our electric bill rises?  my stock 4gb 480s went from 42h/s to 54h/s

When we were on V1 -- lower fan speeds, lower noise, lower utility bill.  If i dont switch to v3 i lose profit -- but if we had all stayed on v1 -- we would all be better off

If your hash rises 20% and your bill rises 20%...you're still good. And you can always downclock

[ps_jb]

To Claymore:

Do you think we are getting saturation point with RX 480 cards?

Or in v. 4.0 you can squeeze more?

p.s. perfect job as usual

[Altcoining]

Hello
Gpu go to off in miner 3.1 what happen?

Remove cat from keyboard.

keyboard remove from cat.

[AzzAz]

Is it possible to make restart whole rig when miner stops ( i.e. from -WD something ) ?? Clay?

yes you can do it . read Readme File.

I know that but I meant just command like "wd 1r" - a simple way to restart rig ...

[Banksuckmyballs]

A really large improvement using v3.1.

Fiji: 85H/s (!)
Hawaii: ~80H/s
Tahiti: 50H/s

That is really great !! Ive got Sapphire RX470 OC 4GB Hynix Ellesmere.
Please can you advise what bios and settings for these..
I'm currently using 1375 straps and auto GPU with lower voltage and 1850/875
Getting 55H/s to 62H/s version 3.0

[TheMiningDwarf]

Mod is +vmod

Care to share this BIOS mod?

Claymore - 3.1 is way more stable.  Can even run on i2 now.  Thanks again.  Keep bring the improvements.

I have rx480oc 8 gigs get pretty nice speed, 80 per gpu
But if I use tge -i 2 i lose speed instead .
I have 16 gigs ram and virtual set to 32.
But weak cpu, just a celeron.

Is it because of my cpu ?
Thanks

What BIOS rom and settings are You using?

core, mem, vcore and vmem? i only can hit the 62Hs with my 480 nitro 8GB

All i changed is the mod bios from when i was mining eth
And the -mclock 2150
But as soon as i put the -i 2 in there speed drops to 60 sols per gpu

[d57heinz]

Great job @claymore. 3.1 worked out the kinks introduced in v3.0.

Best Regards
d57heinz

[farsky]

2x RX 480 (8Gb) + R9 280x.
Mining 15 minutes - crash and reboot computer


System:
s1150, CPU g3420, 8Gb RAM
Driver Crimson 16.11.2

config.txt

Code:

-zpool zec-eu.suprnova.cc:2142
-zwal bluefarsky.MyZ1
-zpsw x
-r 0
-i 2

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100



LOG file

Code:

23:45:58:871	4f0	args: -zpool zec-eu.suprnova.cc:2142 -zwal bluefarsky.MyZ1 -zpsw x -r 0 -i 2 
23:45:58:872	4f0	
23:45:58:873	4f0	ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
23:45:58:874	4f0	є            Claymore's ZCash AMD GPU Miner v3.1 Beta            є
23:45:58:874	4f0	ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
23:45:58:875	4f0	
23:45:59:075	4f0	ZEC: 1 pool is specified
23:45:59:076	4f0	Main ZCash pool is zec-eu.suprnova.cc:2142
23:45:59:464	4f0	OpenCL platform: AMD Accelerated Parallel Processing
23:45:59:465	4f0	OpenCL initializing...

23:45:59:465	4f0	AMD Cards available: 3 
23:45:59:466	4f0	GPU #0: Tahiti, 3072 MB available, 32 compute units
23:45:59:466	4f0	GPU #0 recognized as Radeon 280X/380X
23:45:59:466	4f0	GPU #1: Ellesmere, 8192 MB available, 36 compute units
23:45:59:467	4f0	GPU #1 recognized as Radeon RX 480
23:45:59:467	4f0	GPU #2: Ellesmere, 8192 MB available, 36 compute units
23:45:59:467	4f0	GPU #2 recognized as Radeon RX 480
23:45:59:467	4f0	POOL version
23:45:59:467	4f0	b157 
23:45:59:468	4f0	Platform: Windows
23:45:59:474	4f0	start building OpenCL program...
23:46:00:984	4f0	done
23:46:00:985	4f0	GPU #0 intensity 2
23:46:00:985	4f0	GPU #1 intensity 2
23:46:00:986	4f0	GPU #2 intensity 2
23:46:00:986	4f0	Total cards: 3 
23:46:09:525	574	ZEC: Stratum - connecting to 'zec-eu.suprnova.cc' <52.208.89.224> port 2142
23:46:09:593	574	send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "zec-eu.suprnova.cc", "2142"]}

23:46:09:594	574	send: {"id": 2, "method": "mining.authorize", "params": ["bluefarsky.MyZ1","x"]}

23:46:09:594	574	send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

23:46:09:596	574	ZEC: Stratum - Connected (zec-eu.suprnova.cc:2142)
23:46:09:612	4f0	Watchdog enabled
23:46:09:613	4f0	Remote management is enabled on port 3333
23:46:09:614	4f0	

23:46:09:667	574	got 73 bytes
23:46:09:667	574	buf: {"id":1,"result":[null,"f6bfff7f00000000000000007fffbff5"],"error":null}

23:46:09:667	574	parse packet: 72
23:46:09:667	574	new buf size: 0
23:46:09:928	574	got 447 bytes
23:46:09:928	574	buf: {"id":null,"method":"mining.set_target","params":["00f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0"]}
{"id":null,"method":"mining.notify","params":["d8","04000000","cffc0eccf037a2fe1b8283e91404e4c836b7cba15a31fd8a1b9450e101000000","0f49c7422bc9bfb09a9626d094bbbeb2b668089de2fbd1a28bbf3b963f22c1e7","0000000000000000000000000000000000000000000000000000000000000000","bd982358","d5b3021d",true]}
{"id":2,"result":true,"error":null}

23:46:09:929	574	parse packet: 118
23:46:09:931	574	Pool sets new share target: 0x00f0f0f0 (diff: 272H)
23:46:09:932	574	remove first packet 328
23:46:09:933	574	new buf size: 328
23:46:09:933	574	parse packet: 291
23:46:09:934	574	remove first packet 36
23:46:09:935	574	new buf size: 36
23:46:09:935	574	parse packet: 35
23:46:09:936	574	ZEC: Authorized
23:46:09:936	574	new buf size: 0
23:46:13:284	d80	ZEC: put share nonce 112
23:46:13:284	d80	ZEC round found 1 shares
23:46:13:285	574	ZEC: 11/09/16-23:46:13 - SHARE FOUND - (GPU 2)
23:46:13:285	574	send share: {"id": 4, "method": "mining.submit", "params": ["bluefarsky.MyZ1","d8","bd982358","12010000000000000000000000000000","fd4005006155b539c9578be77aa351a8e91c45dd9ab01c5f14bb57a1df525daedac1e19c1bf2c7860c
23:46:13:354	574	got 36 bytes
23:46:13:354	574	buf: {"id":4,"result":true,"error":null}

......


00:01:22:769	d44	parse packet: 35
00:01:22:770	d44	DevFee: ZEC: Share accepted (78 ms)!

00:01:22:771	d44	new buf size: 0
00:01:22:879	68c	ZEC: put share nonce 42d
00:01:22:880	68c	DevFee: ZEC round found 1 shares
00:01:22:881	d44	DevFee: ZEC: 11/10/16-00:01:22 - SHARE FOUND - (GPU 0)
00:01:22:881	d44	send share: {"id": 4, "method": "mining.submit", "params": ["claymore.fee","e6","659c2358","2d040000000000000000000000000000","fd400500239c7e46cf2c314841a3e3c8f1cea211717d8bfd03375d34fce331b37b83311a7aaa9c4504906
00:01:22:960	d44	got 36 bytes
00:01:22:960	d44	buf: {"id":4,"result":true,"error":null}

00:01:22:960	d44	parse packet: 35
00:01:22:961	d44	DevFee: ZEC: Share accepted (78 ms)!

00:01:22:961	d44	new buf size: 0
00:01:23:652	e34	ZEC: put share nonce 4ab
00:01:23:652	e34	DevFee: ZEC round found 1 shares
00:01:23:654	d44	DevFee: ZEC: 11/10/16-00:01:23 - SHARE FOUND - (GPU 1)&

[AcaStar]

With which program i change the parameter for amd on Windows ? .

Afterburner

[Dunkelheit667]

can some one with 7850 or rx 460 or r7 370 post results with claymore latest build please ? did they got also increase in hr or still stuck at 30 -38 h/s ?

I'll post on  Friday I'm getting R7 370 4GB, most likely Hynix of Elpida memory

R7 370 with 2GB, 1040/1425 -> 37 - 40 H/s using v3.1 with -i 0. -i 1 does not help and -i 2 crashed.

[YIz]

A really large improvement using v3.1.

Fiji: 85H/s (!)
Hawaii: ~80H/s
Tahiti: 50H/s

That is really great !! Ive got Sapphire RX470 OC 4GB Hynix Ellesmere.
Please can you advise what bios and settings for these..
I'm currently using 1375 straps and auto GPU with lower voltage and 1850/875
Getting 55H/s to 62H/s version 3.0

Not really sure aboout Ellesmere because I don't own any, but others have posted settings earlier in this thread.

[AcaStar]

On my rig with windows 7 ultimate and 16.10.2 drivers with  6 x MSI r9 380  -80/800/1500 setup on afterburner gettting about 35-37 h/s in total about 220 with new claymore v3 zcash miner mode i-2. Is that Ok or i can do some other setup and get more from this cards?

[kdb424]

Any chance we will see the linux miner updated in the future? I know it's not getting updated now as stated in the first post, but is it discontinued completely?

[h311m4n]

Holly shit, with 3.1, i total 610S/s on 3 rigs for exactly 1004W at the wall!

Lol

1.64W/S 

Thanks claymore!!

[Walrusbonzo]

3.1 works a charm, fixed the instant lockup issues with 3.0 on my 290x rig.

Now pulling 480 sol/s on that single rig

[isma]

mining Z Classic with 2 R290, Claymore 3.1
Cpu is with nheqminer_v0.4b with only 5 threads

https://i.imgur.com/IWNMhsa.jpg