i try with my 5x amd rx570 rig...
10 sol/s per card... then system hangup...... any help ?
speed for Equihash 144,5 is around 10-15 sol for now is true, need dev tune up. for Equihash 96,5 (MNX) must be 1000-1100 sol |
|
|
|
please example linux command.
I don't want to use user_config.json
Thank you.
./lolMiner -coin=ZEL -pool=zel-eu2.coinblockers.com -port=4446 -user=YourWallet.YourRig1 Nice Thank you  |
|
|
|
|
please example linux command.
I don't want to use user_config.json
Thank you.
|
|
|
|
Fiji speed avg. 14 S/s too slow.  use little power, I think it user more power, speed is up. For NVIDIA algo 144,5 use more power is the same 200,9 wait tuning for AMD....GO GO GO  |
|
|
|
I see that there is a new open-source miner for Lyra2REv2 on AMD cards now: https://github.com/CryptoGraphics/lyclMinerPerformance seems better for me too 10%-15% faster at same settings on my Vega 64 cards, is mkxminer gonna be updated with code from this? wow It better 10% for me what about dev fee ? |
|
|
|
What about Fury X (Fiji) ?
I have 6 cards, they are showing in rocm-smi, fan setup is working.
But in tdxminer mines only 1 card (main pci slot) Asus z270-p. I tried all (pci gen's) in BIOS motherboard but nothing.
alredy i have modified grub file on size 9
how about speed for Fury? Thanks 3.7-4 Oh thank  Now, can you run all card ? |
|
|
|
What about Fury X (Fiji) ?
I have 6 cards, they are showing in rocm-smi, fan setup is working.
But in tdxminer mines only 1 card (main pci slot) Asus z270-p. I tried all (pci gen's) in BIOS motherboard but nothing.
alredy i have modified grub file on size 9
how about speed for Fury? Thanks As far as I know the miner only works for the RX series (Polaris) cards. Probably because of the assembler I guess. Thanks, i see. but he said "tdxminer mines only 1 card" (he have Fiji) |
|
|
|
What about Fury X (Fiji) ?
I have 6 cards, they are showing in rocm-smi, fan setup is working.
But in tdxminer mines only 1 card (main pci slot) Asus z270-p. I tried all (pci gen's) in BIOS motherboard but nothing.
alredy i have modified grub file on size 9
how about speed for Fury? Thanks |
|
|
|
when you release support R9 FURY. It use HBM Memory.  |
|
|
|
For IPBC RX VEGA get speed 4000 with Cast XMR miner. SRBMiner RX VEGA get around 2500-2600 h And I have R9 Fury NANO get around 1900-2000 h with SRBMiner "double_threads" : true, "kernel" : 0. I tried change to "double_threads" : false, "kernel" : 4, It get speed 3800 h!! but it not share to pool. something wrong about that. For Normalv7 R9 Fury NANO get around 950-1000 h, "double_threads" : true, "kernel" : 0. and "double_threads" : false, "kernel" : 4. get speed up to 1900 h but it not share to pool.  I think HBM memory is good for mining Cryptonight. Can you fixed something for good speed RX VEGA and R9 Fury, it use HBM memory.  |
|
|
|
Optiminer is better than lolminer Hashrate different 1000 sol/s
For fiji at the moment yes, can confirm that is hat problems with lolMiner. I will try to fix it in 0.4. I user Optiminer, when I increase intensity, GPU use more RAM and speed is up. -> For stock core and reduce core volt get speed 13.2k In lolminer -> stock core and reduce core volt get speed 12.4k and OC 12.8k **R9 nano --set-work-batch 7 is the best speed for more or HIGH speed is drop Hope this information will improve speed up more than Optiminer |
|
|
|
Tested lolMiner-mnx on AMD R9 Fury Nano and R9 Fury-X and I get 0 Sol/s (driver version 16.3.2, Windows 10 x64).
Tested on Nvidia 1060 / 1080 and it's working.
any specific settings required for AMD R9 Fury?
fiji - Now, Optiminer is better than lolminer Hashrate different 1000 sol/s |
|
|
|
What driver version are people using with this miner and the AMD R9 Fury series of GPUs? Does it require an older driver, or is the current AMD driver a good choice?
fiji use amd Blockchain Driver |
|
|
|
don't forget AMD R9 Fury is top hashrate on OptiminerEquihash. I hope you develop lolminer is the same top hashrate for Fury |
|
|
|
Linux version. bad for R9 Fury Window version is best |
|
|
|
Miners who have Fury X, Fury Nano, ProDuo. Please re-download mkxminer200. Links in OP.
Thank you, tale01, for reporting the issue.
Thank you so much , speed is OK. hope you develop for another pool such as "miningpoolhub", etc. |
|
|
|
Version 2.0 - Speed for Fiji is down(-5MH/s).
I setting the same old version
Thank you.
Hello! This is unexpected. I did not modify the kernels for this release. Which Fury do you have? I have access to Fury X and can double check. What speeds did you have in v1 and have in v2 now? Usually, you have to wait about 5 minutes to get accurate speed measurements. Thanks I wait around 50 min, speed is not up (environment and config is the same old version)  My card is R9 Fury Nano see picture  Please provide your command line (avoid putting your login and password!). Do you have the --asm in command line? Intensity should be 23 for best results. You may need to increase Windows swap size to 30GB or otherwise the miner will not start (Windows drivers limitation). Fist time I use --asm and now I try test with out --asm is getting the same speed!! It different from old version, when use --asm get speed up. Command setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 mkxminer.exe -d 0,2,3,4,5 --exitsick --asm -o stratum+tls://stak.suprnova.cc:7710 -u login.worker -p x -I 23 Windows swap is virtual memory ? I set to 45GB You are correct. I was able to replicate the problem. Please give me one hour to upload new version. Thanks for finding this! Wow, Thanks for fast solve. i'm wait... |
|
|
|
Version 2.0 - Speed for Fiji is down(-5MH/s).
I setting the same old version
Thank you.
Hello! This is unexpected. I did not modify the kernels for this release. Which Fury do you have? I have access to Fury X and can double check. What speeds did you have in v1 and have in v2 now? Usually, you have to wait about 5 minutes to get accurate speed measurements. Thanks I wait around 50 min, speed is not up (environment and config is the same old version) My card is R9 Fury Nano see picture Please provide your command line (avoid putting your login and password!). Do you have the --asm in command line? Intensity should be 23 for best results. You may need to increase Windows swap size to 30GB or otherwise the miner will not start (Windows drivers limitation). Fist time I use --asm and now I try test with out --asm is getting the same speed!! It different from old version, when use --asm get speed up. Command setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 mkxminer.exe -d 0,2,3,4,5 --exitsick --asm -o stratum+tls://stak.suprnova.cc:7710 -u login.worker -p x -I 23 Windows swap is virtual memory ? I set to 45GB |
|
|
|
Version 2.0 - Speed for Fiji is down(-5MH/s).
I setting the same old version
Thank you.
Hello! This is unexpected. I did not modify the kernels for this release. Which Fury do you have? I have access to Fury X and can double check. What speeds did you have in v1 and have in v2 now? Usually, you have to wait about 5 minutes to get accurate speed measurements. Thanks I wait around 50 min, speed is not up (environment and config is the same old version) My card is R9 Fury Nano see picture |
|
|
|
|
Version 2.0 - Speed for Fiji is down(-5MH/s).
I setting the same old version
Thank you.
|
|
|
|
|
Show Posts
