Bitcoin Forum
July 05, 2020, 07:12:03 AM *
News: Latest Bitcoin Core release: 0.20.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 ... 68 »
  Print  
Author Topic: lolMiner 1.02:A lot of bug fixes (July 1st 2020)  (Read 83309 times)
Lolliedieb
Member
**
Offline Offline

Activity: 379
Merit: 39


View Profile WWW
July 22, 2018, 09:29:39 PM
Last edit: July 01, 2020, 08:30:29 AM by Lolliedieb
Merited by CjMapope (5), suchmoon (4), VoskCoin (3), OgNasty (2), Anon11073 (2)
 #1


    lolMiner

    -- Announcement Thread --


    Hi there,
    this is the announcement thread for lolMiner 1.02  a multi algorithm Equihash / Beam & Grin miner with focus on AMD GPUs (OpenCL based).
    Note it will run on most Nvidia GPUs, too but the speed and stability may vary.


    Download:

    lolMiner 1.02:
    [Linux & Windows] Click me (1.02 - July 1st)


    Driver Requirement:
    Windows: Adrenaline 19.1 & newer (pre Navi) / 19.10.02 & newer (Navi), Linux: 18.10 & newer (RX 390, Fury, 470-580),  18.50 & newer (Vega, VII), 19.30 & newer (Navi)


    Usage:
    There is a new online manual with basic examples hosted here.

    Supported Algorithms

    Algorithm            Solvers for Memory Size
    Beam Hash I3G / 4G
    Beam Hash II3G / 4G
    Beam Hash III6G
    Cuckatoo-31   4G / 8G / 16G
    Cuckatoo-32   4G / 8G / 16G
    Cuckaroo-30CTX8G
    CuckarooD-294G / 6G
    CuckarooM-296G / 8G
    ZelHash    3G / 4G
    Equihash 144/52G
    Equihash 192/73G / 4G
    Equihash 210/92G

    * and many others


    Changelog

    Version 1.02
    • Disabled Beam Hash III auto switcher. --coin BEAM now pointing to --algo BEAM-III - this should resolve some config problems
    • Fixed a bug that made the miner not starting BEAM-III on RX 550 4G GPUs
    • Fixed a bug that made the miner not start mining Cortex
    • Fixed a bug with Beam Hash I 3G solver (miners did not find it)
    • Fixed a bug not writing a log file when --log on was given
    • Fixed a bug with parameter --digits (was missing in 1.0 and 1.01)
    • Re-Enabled parameter --port, but with a big red deprecation warning. Will resolve some 1.0 config problems

    Version 1.01
    • Improved performance of Beam Hash III on all 6G+ cards (by about 4-5%)
    •    Added 3G* / 4G solver for Beam Hash III
          (* will not work in Windows 10 and some older AMD cards)
    •   Fixed an issue with mining Beam Hash III to NiceHash
    •   --tls now allowed to be used multiple times to configure it for each pool separately
    •    If found the miner will now load the user_config.json file per default again (fixes issues with minerstat)
    •   Fixed temperature and power monitoring for VII and Navi on Windows 10 (Fan speed may still be broken ... work in progress)


    Version 1.0
    • lolMiner got a restructure how to configure it and also features a 2nd, more simple config file format.
      Use lolMiner -h to get a list of new supported parameters or visit the new online manual  
    • Added optimizes solvers for Beam Hash III for AMD & Nvidia cards. Use --coin BEAM to auto switch from BeamHash II to BeamHash III on fork (approx June 28th, requires 8G card) or select Beam Hash III solver manually with --algo BEAM-III (requires 6G card)
    • Added performance improved (+ >10%) GRIN-C29M solver for 8G GPUs
    • Added Cuckaroo-30 solver to mine Cortex Ai (--coin CTXC or --algo C30CTX) for all 8G and higher GPUs
    • Added support for non-integer difficulty on Grin
    • Reactivated support for Beam Hash I including support for personalization strings.
    • AMD Navi does now work on all supported algorithms
    • Removed Grin Auto-Switcher (C31 is obsolete now and the switcher would not work on next Grin fork)
    • Removed support for MNX (Minex Coin project is dead / abandoned by developers)
    • Added temperature, consumption and fan speed readings in API and long statistics
    • Internal bug fixes

    Version 0.9.8
    • New GRIN-C29M solver, Less memory usage (fits 6G) & 8-12% better performance
    • Added BEAM support for AMD Navi Generation
    • Fixed a lot of driver issues of the last build with GRIN codes
    • Renamed GRIN-AD29 to MWC-C29D

    Version 0.9.7

    Version 0.9.6
    • Significant improvement on GRIN-C29M performance (+6-7% on 580 and Vega cards, +10% on Navi)
    • Significant improvement on GRIN-C31 and GRIN-C32 solver (~ +6% on all AMD cards)
    • Added a 16G GRIN-C32 solver (Approx 20% faster on Radeon VII, Vega FE and 570 16G)

    Version 0.9.5
    • Added support for Grin CuckarooM-29 (hard fork on Jan 16th) on 8G AMD GPUs, use --coin GRIN-C29M to mine with it.
       Hint: The miner will pause until the fork height is reached not to waste energy. Use --coin FLOO-C29M to test the miner in floonet testnet before if you like.
    • Improved C31 performance on 8G cards by ~5% (Windows: relatively to 0.9.3, Linux: relatively to 0.9.4)
    • Navi on Windows now runs same kernels as in Linux
    • Slightly lowered energy use of C31 / C32 solver
    • Added aliases GRIN-C31 and GRIN-C32 for the Cuckatoo solvers (the old names still exist and continue to work)
    • Changed driver requirement for all GRIN codes: 18.50 for all pre-Navi cards, 19.30 for Navi (Linux); Adrenaline 18.12 for all pre-Navi, Adrenaline 19.10 for Navi

    Version 0.9.4 (Linux Only)
    • New GRIN-AT31 performance code for Vega (+7%) and Navi (+12%). Requires amdgpu-pro 18.50 or newer or ROCm 2.10 driver
    • Experimental support for Cuckatoo-32 (use --coin GRIN-AT32) on 8G AMD cards (see further notes)
    • Windows release postponed due to incompatibilities with the new performance codes.

    Expected performance (C31, 0.9.4)
    Radeon VII (Stock, 19.30): 1.91 g/s
    Radeon VII (1330 / 975 / 775mV, ROCm 2.10): 1.55 g/s
    Vega 64 (1550 / 1100 / 1000mV, ROCm 2.10): 1.45 g/s
    Vega 64 (1350 / 1025 / 875mV, ROCm 2.10): 1.25 g/s
    Vega 64 (1350 / 1025 / 875mV, 19.30): 1.22 g/s
    Vega 56 (1270 / 900 / 862mV, 19.30): 1.1 g/s
    RX 5700 (Power Color Red Dragon, Stock, 19.30): 0.99 g/s

    Expected performance (C32)

    Radeon VII (Stock): 0.5 g/s
    RX 64 (Stock): 0.39 g/s
    RX 56 (Stock): 0.35 g/s

    About Cuckatoo-32 (Grin)
    The primary grin proof of work Cuckatoo 31+ is designed in a way that the original instance - cuckatoo-31 - will fade out beginning mid January 2020, which means its difficulty will increase slowly over a period of 31 weeks until it gets impossible to mine a C31 block on the chain. But as by design also more difficult instances of Cuckatoo, namely Cuckatoo-32 ... Cuckatoo-63 are implemented on the chain that also can make blocks. The difficulties of this higher instances will remain stable, such that at some point it will be more profitable to mine Cuckatoo-32 instead of Cuckatoo-31 (likely from mid of February).

    lolMiner 0.8.4 provides the first public implementation on a C32 GPU miner for 8G cards. The code is not yet tuned to the max and thus flagged experimental. When you want to pool mine with it make sure the pool supports Cuckatoo-32. Some pools (e.g. grinmint.com) - especially the pools using the reference pool software - support it on their C31 ports without mentioning it, other pools currently reject C32 shares. Solo mining with C32 will work as usual. Note that a share of C32 has ~2.064 times the weight of a C31 share and will thus rewarded higher / has a higher chance to mine a block by that factor.

    Currently there are already two solo mined C32 blocks on the Grin blockchain using an early version of the code published with lolMiner 0.8.4. The two blocks have height 430112 and 430255.

    Have fun experimenting with C32.


    Version 0.9.3
    • Extended GRIN-AT31 compatibility to older drivers (18.x +)
    • Improved GRIN-AT31 performance on ROCm (RX 470/480/570/580/Vega/VII)
    • Introduced early job cancellation for GRIN-AT31+ (improves hash on pool side, see further release notes)
    • Deeply reworked kernel scheduler
    • Fixed GRIN-AT31 kernel bugs (improving stability and fidelity)
    • Fixed Bug: Vega FE loading 8G instead of 16G GRIN-AT31 solver in Windows
    • Fixed Bug: Watchdog did not call right file in Windows
    • Added --disablewatchdog 1 parameter to disable the 0 sol/s / 0 g/s detection


    About Early Job Cancellation for GRIN

    The GRIN proof of work is a compute intense and rather slow algorithm. Especially C31 often needs (at 1 g/s) about one second for each graph processed. In case a new job (for a new chain height) arrives, the current calculation effort is worthless, because the block that was mined on already got found.
    lolMiner 0.9.3 now introduces an early cancellation for long lasting works: if a new work arrives that invalidates the current run calculations, they get canceled to start quicker on the fresh work. To demonstrate the effect see the example describing the 0.9.2 and 0.9.3 difference:
    Assume you have a card running 1 g/s on GRIN-AT31. Then in 2 minutes (120 seconds) it will be able to process 120 graphs. On average - Grin has a 1 minute block time - two of these graphs are already obsolete when they got finished.
    lolMiner 0.9.2 will display the 1 g/s, because of 120 processed graphs per 120 seconds. But two of the graphs are then filtered out in the stratum module, thus the pool can see at most 118 / 120 = 0.983 g/s (minus about 1 graph fee).
    lolMiner 0.9.3 will cancel the running work before it gets completed. On average you will be able to process one more graph then 0.9.2 assuming both are canceled about half way through. Thus lolMiner 0.9.3 starts 121 graphs and completes 119 of them. The displayed hash rate is now 119 graphs /120 seconds = 0.991 g/s. This equals what the pool could see (minus one for fee), because the 119 completed are the ones that got not canceled early.

    Conclusion: lolMiner 0.9.3 DISPLAYED hash rate may be a little lower then 0.9.2, but what arrives at pool is better. The slower the cards are, the more drastic is this effect, e.g. a 580 8G running at 0.65 g/s will benefit almost 2% on pool side, a VII with 1.75 g/s only half a percent.
    Combined with the mostly on GPU cycle finder lolMiner achieves a stale share rate of less then 0.7% and thus gives you best displayed to pool hash rate ratio available for Grin Cuckatoo-31.


    Version 0.9.2
    • Significant performance improvement of GRIN-AT31 on 8 / 16G cards (+5% on Polaris & Vega, +10 on Navi)
    • Experimental support for GRIN-AT31 and Polaris, Vega and VII using AMD ROCm drivers
    • Added range checks to GRIN-AT31 code (improves better stability)
    • Added function to call external watchdog scripts in case a GPU fails during mining (see release notes)

    Usage of Watchdog Script

    In case the miner detects no action of a GPU for at least a minute it will call the included scripts "reboot.sh" (Linux) or "reboot.bat" (Windows) and display a warning message in red. Afterwards the counters are reset. The scripts can be used to trigger a reboot of the rig or to call any other watchdog actions. The miner itself will take no further action and continue operation on the remaining cards.


    Expected Performance:

    • Radeon VII (stock): 1.79 g/s
    • Radeon VII (1375/975/0.793v, 110W): 1.37 g/s
    • Vega FE (stock): ~1.3 g/s
    • Vega 56 (1230/900/0.85v, 130W): 1.0 g/s
    • RX 5700 (Red Dragon, stock): 0.91 g/s
    • RX 580 8G (1240/2150/0.868V, ~120W): 0.61 g/s

    Version 0.9.1
    • Added GRIN-AT31 solver for 16G AMD cards (Better performance on Radeon Vega FE, Radeon VII and Sapphire RX 570 16G)
    • Updated GRIN-AT31 solver for 4G AMD cards (Better performance on Fiji based GPUs, Polaris 10 4G)
    • Fixed a bug causing too low pool hash on GRIN-AT31
    • Added experimental GRIN-AT31 support for AMD Navi (8G), AMD Fiji (4G) and AMD Hawaii (4G / 8G) GPUs

    Version 0.9
    • Significant performance improvement for GRIN-AT31 on 8G AMD cards (+22% on Polaris to 30% on Radeon VII)
    • Disabled 16G solver for GRIN-AT31 (the 8G is faster at the moment)
    • Reduced Grin stale shares
    • Added --coin YEC parameter for YCash
    • In command line lolMiner now accepts --pool address:port pattern
    • Fixed a bug with the API crashing when accessed by Chrome based browsers
    • Fixed a bug in EXCC stratum not passing number of submitted shares to the API

    Version 0.8.8
    - Removed BEAM-I (Beam Hash I), since the fork had happened, BEAM-II and BEAM now both point to the new PoW
    - Improved driver detection mechanisms and kernel selection
    -> On AMDs: The invalid work group size bug should be gone for Beam*
    -> On Nvidias: Performance of Beam Hash II should be improved (since it now uses the right kernels)
    - Added new simple .bat (Windows) and .sh (Linux) files for one liner configuration.
    - Beta: Equihash 96/5 (--coin MNX) should now allow to change the personalization string (--overwritepersonal=newPers)

    (*) Note: If you see now BeamHash II running in a compatibility kernel on Polaris or Vega cards please report me your driver version (it was tested with 19.20 drivers) - older drivers may in future be unsupported for newer kernels.

    Changes of 0.8.7 over 0.8.6
    - Added support for Beam Hash II on older AMD cards (R 9 200 / 300 4 & 8G cards;  R9 280(X), HD 79x0 with 3G). Note that the auto-switcher is only working with at least 4G, for the 3G cards please use --coin BEAM-II manually on fork height.
    - Fixed an issue with Genesis Network (GENX) missing in lolMiner 0.8.x

    Changes of 0.8.6 over 0.8.5
    - Added support the BEAM hard fork on block 321321 (approx August 15th), read below about the usage
    - Fixed a bug with the BEAM stratum back end in case of formatted job descriptions (e.g. new Nicehash platform)

    Note about the BEAM hard fork usage
    There are now 3 parameters for mining BEAM, --coin BEAM-I, --coin BEAM-II and --coin BEAM
    - Use BEAM-I for mining the current / old BEAM proof of work that is valid until the hard fork.
    - Use BEAM-II for mining the new BEAM proof of work that is valid from the hard fork.
    - Use BEAM for an automatic switcher between the two PoWs. This mode will detect the height and the fork height and will automatically switch over on the right block. Note that this requires the pool to send at least the height. On startup the miner will detect if the pool is compatible to the automatic switcher and display a message if all is fine.
    The message is colored in command line:  green - in this case the new PoW is guarantied to be supported; yellow - the height is send so the miner can switch over, but its uncertain if the new PoW is implemented; red - the pool does not send the required information.
    In the last case the miner will show the message and then quit after 10 seconds. In this case select the right PoW manually with BEAM-I or BEAM-II.  When at least the height is send, the miner will start mining in automatic mode.


    Changes of 0.8.5 over 0.8.4
    - Added support for Grin Cuckarood-29 algorithm (--coin GRIN-AD29) for 4G and 8G AMD cards. This new PoW will be active on Grin from block 262.080 (July 17th)

    Changes of 0.8.4 over 0.8.3
    - Fixed a 0 sol/s issue for Zelcash
    - Reduced Zelcash memory usage to 2.9 GBytes
    - Fixed a bug with the stratum for 125/4, 144/5, 192/7 and 96/5 in case the pool sends a very low job id.


    Changes of 0.8.3 over 0.8.2
    - Added a new Cuckatoo-31 solver for 16G AMD cards

    Changes of 0.8.2 over 0.8.1
    - Added support for ZELHash (EquihashR 125/4/0). The new algorithm is available under --coin ZEL now. If you want to mine Zel pre fork please use 0.8.1 or earlier version

    Changes of 0.8.1 over 0.8
    - Added support for NiceHash on Grin
    - Fixed a bug with some pool software (e.g. grinmint.com)
    - Reduced number of stale shares submitted

    Changes of 0.8 over 0.7(.1)
    - Added support for Grin (Cuckatoo-31) for 4G (Slean) and 8G cards. The parameter is "--coin GRIN-AT31"
    - Grin cycle finding is completely done on GPU, the miner has almost 0 CPU load (on AMD, Nvidia has some due to OpenCL back end)
    - Stratum bug fixes (NiceHash) for 144/5, 192/7 and  96/5
    - Improved general stability
    - Added a distinct 1G / 3&4G / 6&8G kernel for mining MNX (Windows, Linux had this in 0.7.1)

    Changes of 0.7.1 over 0.7
    - Added a distinct 1G / 3&4G / 6&8G kernel for mining MNX
    - Added a new parameter --asm. The parameter activates the use of binary kernels, see below.

    Binary kernels in 0.7.1
    lolMiner 0.7.1 features binary kernels for mining **BEAM** that are tuned with AMD assembler commands. This kernels currently **require** the **AMD ROCm** OpenCL driver in Linux (thats why 0.7.1 is Linux only).
    When you run a system with this OpenCL drivers using --asm 1 or the pendant in config file, the miner will try to load the binary kernels.

    The kernels feature a speedup of approx 8% on Radeon RX 580 series and 10% on Vega 56, 64 and Radeon VII. Also the energy consumption should slightly be reduced. There are kernels included for RX 470, 480, 570, 580, 590, Vega 56, 64 and Radeon VII. Fiji GPUs can be compatible but are untested yet.

    It is planned for future releases to extend the support for other drivers and Windows, but these other drivers make it complicated to handle the improvements. Stay tuned.

    Changes of 0.7 over 0.6 stable

    - Added support for Beam (BEAM, modified Equihash 150/5), only tuned for AMD cards
    - Added TLS support for stratum. The default is off for all coins except Beam but on for Beam. This adds a new parameter --tls to control TLS on / off (see manual on usage)
    - Some bugfixes and reworks in the stratum code. It is more stable now
    - Complete rework of the mining back end. Lower CPU load for AMD graphic cards.
    - GPU sorting changed. Its now sorted by PCIE bus address. This addresses are also shown at startup and in API.
    - Integrated all kernel files to the executable
    - Lowered fee of ALL algorithms / coins to 1%
    - Added --help parameter (needs formating)
    - API update interval is now fixed to 10 seconds
    - API now smooths the performance data over approx one minute

    Coin specific changes:
    - Removed workbatch parameter for MNX, its obsolete now
    - Removed 96/5 Nvidia specific kernel
    - Changed Safecoin (SAFE) from Equihash 144/5 to 192/7
    - Added Vidulum (VDL), Equihash 192/7


    Changes of 0.6 over 0.5 stable

    - New codes for all coins on all cards (better speed)
    - New API and statistics module (API updating every 10 seconds)
    - Better stratum stability
    - Improved stability for many GPU systems
    - and many more small stuff I can not remember Wink
    [/list]
    1593933123
    Hero Member
    *
    Offline Offline

    Posts: 1593933123

    View Profile Personal Message (Offline)

    Ignore
    1593933123
    Reply with quote  #2

    1593933123
    Report to moderator
    1593933123
    Hero Member
    *
    Offline Offline

    Posts: 1593933123

    View Profile Personal Message (Offline)

    Ignore
    1593933123
    Reply with quote  #2

    1593933123
    Report to moderator
    100% First Deposit Bonus Instant Withdrawals Best Odds 10+ Sports Since 2014 No KYC Asked Play Now
    Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
    Elder III
    Sr. Member
    ****
    Offline Offline

    Activity: 1148
    Merit: 270


    View Profile
    July 22, 2018, 09:46:12 PM
     #2

    I'll test this new version and report the AMD results I get once the Windows option is available for testing.  Keep up the good work and don't forget to get some sleep.
    tale01
    Newbie
    *
    Offline Offline

    Activity: 105
    Merit: 0


    View Profile
    July 23, 2018, 05:58:15 AM
     #3

    please example linux command.
    I don't want to use user_config.json

    Thank you.
    Jules81
    Newbie
    *
    Offline Offline

    Activity: 33
    Merit: 0


    View Profile
    July 23, 2018, 06:45:19 AM
     #4

    please example linux command.
    I don't want to use user_config.json

    Thank you.



    ./lolMiner -coin=ZEL -pool=zel-eu2.coinblockers.com -port=4446 -user=YourWallet.YourRig1
    tale01
    Newbie
    *
    Offline Offline

    Activity: 105
    Merit: 0


    View Profile
    July 23, 2018, 06:48:27 AM
     #5

    please example linux command.
    I don't want to use user_config.json

    Thank you.



    ./lolMiner -coin=ZEL -pool=zel-eu2.coinblockers.com -port=4446 -user=YourWallet.YourRig1


    Nice Thank you  Cheesy
    Lolliedieb
    Member
    **
    Offline Offline

    Activity: 379
    Merit: 39


    View Profile WWW
    July 23, 2018, 07:58:48 AM
     #6

    I just added the Windows binary  Cheesy

    Only thing I observed there is that the API in Windows seems to be a bit unstable - at least the Api shut down from time to time (this does not affect mining itself). I will look into that Smiley
    kostepanych2
    Full Member
    ***
    Offline Offline

    Activity: 882
    Merit: 104


    BBOD - The Best Crypto Derivatives Exchange


    View Profile
    July 23, 2018, 09:27:27 AM
     #7

    Is there any sense to mine Equihash 144.5 coins on AMD GPUs?
    Or this algo is not profitable on AMD GPUs?

    invizion
    Newbie
    *
    Offline Offline

    Activity: 44
    Merit: 0


    View Profile
    July 23, 2018, 10:53:46 AM
     #8

    Nice, when Aion 210.9?
    Lolliedieb
    Member
    **
    Offline Offline

    Activity: 379
    Merit: 39


    View Profile WWW
    July 23, 2018, 11:25:25 AM
     #9

    I just updated the files, fixing a glitch that made the miner hang on startup on some systems.

    Nice, when Aion 210.9?

    When 144.5 AMD code got quicker Wink
    svedr
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    July 23, 2018, 11:39:33 AM
     #10

    i try with my 5x amd rx570 rig...

    10 sol/s per card... then system hangup...... any help ?
    freeminds
    Newbie
    *
    Offline Offline

    Activity: 19
    Merit: 0


    View Profile
    July 23, 2018, 11:42:57 AM
     #11

    Hello,

    apart from the few command line options described in the 2 PDF files, are there any other command options? if so, what are they?

    Thank you in advance for your answers
    bomjskill
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    July 23, 2018, 11:53:22 AM
     #12

    I just updated the files, fixing a glitch that made the miner hang on startup on some systems.

    Nice, when Aion 210.9?

    When 144.5 AMD code got quicker Wink

    Taк и нe paбoтaeт(((( Бoлee cлaбыe видeoкapты бyдeт пoддepживaть? R7 200 series
    tale01
    Newbie
    *
    Offline Offline

    Activity: 105
    Merit: 0


    View Profile
    July 23, 2018, 12:21:52 PM
     #13

    i try with my 5x amd rx570 rig...

    10 sol/s per card... then system hangup...... any help ?


    speed for Equihash  144,5 is around 10-15 sol  for now is true, need dev tune up.

    for Equihash  96,5 (MNX) must be 1000-1100 sol
    ripcurrent
    Member
    **
    Offline Offline

    Activity: 160
    Merit: 10


    View Profile
    July 23, 2018, 01:15:37 PM
    Last edit: July 23, 2018, 01:38:33 PM by ripcurrent
     #14

    Is there a way to see the intensity setting and a way to adjust it?
    Running miner on 1080ti even with only 50% TPD it is using 250 watts per card..power usage is off the hook.
    Lolliedieb
    Member
    **
    Offline Offline

    Activity: 379
    Merit: 39


    View Profile WWW
    July 23, 2018, 01:30:02 PM
     #15

    Hello,

    apart from the few command line options described in the 2 PDF files, are there any other command options? if so, what are they?

    Thank you in advance for your answers

    What options do you search for? Anything specific?


    i try with my 5x amd rx570 rig...

    10 sol/s per card... then system hangup...... any help ?


    The 10 sol/s for 570 and Equihash 144.5 seem normal (for 96.5 it should be 10k), but the hangup is not - for how long did it mine before crash?
    ripcurrent
    Member
    **
    Offline Offline

    Activity: 160
    Merit: 10


    View Profile
    July 23, 2018, 01:48:51 PM
     #16

    LolMiner 1080ti - 38sol   
    ebwf       1080ti -56sol


    big difference, anything I should be looking at? All same settings...
    edwinosky
    Jr. Member
    *
    Offline Offline

    Activity: 69
    Merit: 1


    View Profile
    July 23, 2018, 01:54:13 PM
     #17

    Error Violation of segment ('core' generated)
    does not run the miner in ubuntu 18, with latest AMD drivers
    Kgonla
    Newbie
    *
    Offline Offline

    Activity: 128
    Merit: 0


    View Profile
    July 23, 2018, 02:08:50 PM
     #18

    Windows version is not working for me.
    The program self opens continually, thousands of times, eating all the computer resources & finally you have to do a hard reset.
    artful
    Newbie
    *
    Offline Offline

    Activity: 58
    Merit: 0


    View Profile
    July 23, 2018, 02:10:21 PM
     #19

    me try launch lolminer in console:

    Code:
    ./lolMiner -coin=BTG -pool=btg.suprnova.cc -port=8866  -user=USERNAME.CPx000000004 -devices=1
    -------------------------------------------------
                 Welcome to lolMiner 0.4            

       This software is only meant for pool mining  
        with the Equihash 96.5 or 144.5 algorithm    

              Made by Lolliedieb, July 2018          
    -------------------------------------------------
    lolMiner is configured to mine Bitcoin Gold(BTG), Equihash 144.5
    Reading pool data from command line
    Setup Miner...
    Devices selected: 0
    Error: No OpenCL devices found or selected

    why Devices selected: 0 ??

    if me launch:
    Code:
    ./lolMiner -coin=BTG -pool=btg.suprnova.cc -port=8866  -user=USERNAME.CPx000000004          
    -------------------------------------------------
                 Welcome to lolMiner 0.4            

       This software is only meant for pool mining  
        with the Equihash 96.5 or 144.5 algorithm    

              Made by Lolliedieb, July 2018          
    -------------------------------------------------
    lolMiner is configured to mine Bitcoin Gold(BTG), Equihash 144.5
    Reading pool data from command line
    Setup Miner...
    Devices selected: 1
    Using device with id 0 (GeForce GTX 1080)
    Using device with id 1 (GeForce GTX 1060 6GB)
    Using device with id 2 (GeForce GTX 1060 6GB)
    Using device with id 3 (GeForce GTX 1060 3GB)
    Warning: Your device with id 3 is currently not supported by lolMiner or by the specific algorithm you selected.
    Connecting to pool...
    Connected to btg.suprnova.cc:8866
    Subscribed to stratum server
    New target received: 00f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0
    New job received: 38
    Authorized worker: USERNAME.CPx000000004

    and why lolminer show me error if json file is deleted ?

    Code:
    ./lolMiner -coin=BTG -pool=btg.suprnova.cc -port=8866  -user=USERNAME.CPx000000004
    -------------------------------------------------
                 Welcome to lolMiner 0.4            

       This software is only meant for pool mining  
        with the Equihash 96.5 or 144.5 algorithm    

              Made by Lolliedieb, July 2018          
    -------------------------------------------------
    Error: ./user_config.json is not found or no valid configuration file (json parse fails).
    ./user_config.json: cannot open file

    freeminds
    Newbie
    *
    Offline Offline

    Activity: 19
    Merit: 0


    View Profile
    July 23, 2018, 02:38:43 PM
     #20

    Hello,

    apart from the few command line options described in the 2 PDF files, are there any other command options? if so, what are they?

    Thank you in advance for your answers

    What options do you search for? Anything specific?


    at least, I would have appreciated the following options (which were present in v0.34):
    -max-connection-Attempts
    -set-reconnection-timer
    -enable-time-print
    some options that I will appreciate:
    possibility to generate a log file
    set maximum temperature threshold
    Pages: [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 ... 68 »
      Print  
     
    Jump to:  

    Sponsored by , a Bitcoin-accepting VPN.
    Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!