Do this have the same autotune function as claymore?
|
|
|
Here watch this video on YouTube: https://www.youtube.com/watch?v=lS9HQjIwrRMThat is tutorial How to mod and flash your AMD GPUs' bios for mining, with those settings you will not need Overdriventool, as far as I know. Also there are other videos there that could help you in solving your problem. But if you really want to stick with Overdriventool, maybe some settings are different on your other rig. So compare everything and see if there is difference between them. Only bios mod gives about 24 mh/s With OC I get 31.x I guess I have to shutdown the rig to make OC reset.
|
|
|
Rather than using an 3rd party Overdrive tool you can set it up permanently yourself.
OC by changing your GPU memory timings using a BIOS editor. Then patch it. Then tweak your memory clocks on the script or on MSI Afterburner and with afterburner you can save your settings and profile and set it up to start on windows start up.
Cheers.
Memory clocks on the script? Is that like an autoOC tool?
|
|
|
Hi. When resetting rig the oc settings is not reset. Win 10 pro Using overdriventool to oc and undervolt. Overdriventool is not starting together with windows. Trixx is not installed.
On my other rigs the oc settings is reset when resetting the rig.
Anyone experienced the same issue?
|
|
|
Anyone knows if gpu order is the same in sapphire trixx, gpu-z, hardware monitor and atiflash and atiwinflash?
|
|
|
Can't find any documentation on how to do this with more than 9 as well. Save yourself all the trouble and simply just do it on another PC with less GPUs. Borrow a PC if you dont have an extra one lying around. Much easier than flashing the wrong GPU, then have to deal with all the trouble of not being able to boot and all that.
Ok. I am unable to attach a monitor since all is remote. Guess I have to disable 6 cards in device manager and flash 6+7 cards. All cards have same memory.
|
|
|
How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?
Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?
thx
use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support) like: atiflash -pa -fa -fm -fs -fp asus588.rom How is this going to discover more than 10 gpu? -fa Force flashing bypassing already-programmed check. -fm Force flashing bypassing BIOS memory config check. -fs Force flashing bypassing BIOS SSID check. -fp Force flashing bypassing BIOS P/N check.
|
|
|
Anyone solved this? I have 13 gpu I need to flash.
|
|
|
Target 57C Max temp 80C power mode: -30%
|
|
|
How is this compared to polaris 1.6 ?
|
|
|
For some reason, since the last windows update, i can no longer use the #0 card, it hangs out setting the dag. Has anybody experienced this same problem? I can't go back the windows version, so i'll move to linux (already have a lot of linux rigs so it's not a big problem) but i don't have the time right now, so i wanted to have it fully working for a few days more until the migration Thanx guys! Same thing happened to me. Windows freezes when setting dag epoch on gpu0. Problem is only on my TB85 rx580 rig with 4gb of system ram. My TB250 rx570 rig with 8gb of system ram is fine. Both are six-card rigs. Work has been too busy so I haven't had time to troubleshoot. Just used -di to turn off gpu0 for now. If you figure something out plz let me know. If anyone else has insight, please share. To clarify, I did some very quick and rudimentary troubleshooting. Ddu and clean install of aug23 blockchain driver. Checked riser. GPU0 appears normal in gpuz and msi AB. No time atm to do much more. I wonder if increasing virtual memory might help. Or upgrading to 8GB system ram. I don't want to just try something remotely bc if my rig freezes I won't be able to go to it in person to turn the PSU off/on for at least a few days. Do u have a monitpr connected? Internal gpu enabled?
|
|
|
Can I use nicehash account with claymore and how? I try to setup nicehash with RX570 and I have problems during benchmark process. Never ends and pc freezes. So I cant start mining. Claymore has no problem. Any ideas?
Yes. Look st claymore eth miner thread, first page.
|
|
|
Bought usb watchdog:)
Usb watchdog can't hard reset anything. Well... kind of. If the rig freezez it will reset through reset switch. Cheaper than using wifi outlet. Which model did you buy and for how much money? Item 332592199514 on ebay
|
|
|
Bought usb watchdog:)
Usb watchdog can't hard reset anything. Well... kind of. If the rig freezez it will reset through reset switch. Cheaper than using wifi outlet.
|
|
|
Too bad I cant reach the rigs then :/
Any way to hard reset the motherboard with wake-on-lan ?
wake on lan can only "wake" board. buy a wi-fi power controller.... nice thing... some like this... https://vk.cc/7SjNyv 10A(1 device) , but you can find more powerful by yourself there. Bought usb watchdog:)
|
|
|
I'm facing a problem, claymore is closing after hours working normally, it simply closes without errors.
Claymore version 11.5 pool ethermine via ssl epools.txt = POOL: ssl://us2.ethermine.org:5555, WALLET: mywallet, PSW: x, ESM: 1, ALLPOOLS: 0
In the log the last line that appears is:
ETH: checking pool connection...
And then the claymore closes,
Mine directly to your nicehash wallet instead of ethermine?
|
|
|
GPU0: 300/300 59°c load 0% fan 27%
How can it be 300/300 ? It is 1150/2125
GPU1: 1,150/2,125 49°c load 0% fan 24%
How can it be load 0%? It is working full speed
Using 13 amd gpu radeon 570 nitro+ 8gb.
|
|
|
The included "b250 mining software" is kind of crap. It does not show what lane that is not functioning.
Possibly the generic B250 mobo driver It shows the same as device manager.
|
|
|
The included "b250 mining software" is kind of crap. It does not show what lane that is not functioning.
|
|
|
Too bad I cant reach the rigs then :/
Any way to hard reset the motherboard with wake-on-lan ?
|
|
|
|