Not to defend him,but if his network is anything other than...modem-->router,it can be a bit of a bear But setting up a pool addy (check at your pool's website for instructions) in these is too simple,hell,I'm a moron in regard to networking & software. I can't even compile CGminer & I had my Ants up & mining in about 5 minutes,had to wait for changes to take effect took half that time up I am thankful in behalf of papmoi Thank you vey much Unacceptable Papamoi, as you see even morons can cope with such things. I am wondering if bigger idiot theory still works Or you papamoi are the biggest idiot of them all
|
|
|
Also. We're expanding a bit. Looking to fill a few positions from customer service to marketing and even a few operations oriented positions. Rather than positing what we need, we'd kind rather do it the other way around and just say.. if your in the tri-state/main line area and you'd like to work for a coin mining manufacturer please send your resume to Josh@advancedminers.com and include a brief description as to what you'd like to do, where you think you might fit in and what prior experience you have that would make you be good for that role. We're open, we need staff across the board to handle several departments, and even technicians are welcome to apply as well. This is kind of a open tryouts type thing. Again not the most professional way to recruit but hey, the birds got Vince Papale in 1976 and that didn't turn out to bad now did it. LOL The "coin mining manufacturer" is expanding the assembly lines! Hurry up, people! AMT: First units ship out on Wednesday guys Which Wednesday? the one of the 10th week of March or 19.02.2014 Wednesday? I know that ISAWHIM knows exactly which Wednesday are you referring to but he is silent this days PS: it would be much easier for your customers if you AMT guys start to speak with dates and stop using week numbers and week days. Do you think so? I do and i am damn sure that you customers do also
|
|
|
Don t take in account what this bastard of dropt and his gayfriend loshia are babling around
they just do like waste their time and others
but as i said it s better to warn people about costs and returns and make them know that there is other cheaper alternative
because if they pay their miners at this price and with the hashrate skyroacketting there is more than big chances that they will never make any money with it
so it s a friendly advice to any forumers and nothing against u
Drops, Thank you honey Yeah papamoi is getting sick and desperate because of us ? You should join gay side that is a key for sucess A have a special medicine for the first ass pain when you enter our world The recipe is to stick as many different chips in your ass and start hashing from the first try papamoi And finally just spread your chicks wide open and publish the Incredible miner Pcb as open source Ps: skip the firmware it will be too shity and stinky for sure
|
|
|
Please don t pay attention to this gay loshia .he and his friend dropt are wasting time around talking no sense
just read their posts
please pm about volume as we have some plans
thanks
I miss the ignore button also Papamoi is famous with first "open source ASIC chip" and a lot more funny things. Do not waste your time to follow his posts. But in case you want some fun I strongly advise you to follow mines Best
|
|
|
hi
any volume discount?
Are you asking for chip volume discount to mount them on your PCB ; It is working an only missing part to make money are the chips in volumes
|
|
|
Damn You're fast. Thanks it worked perfectly The trick is to press ctr+a+d to quit screen session at the end
|
|
|
you need a putty.exe for windows start it put your TP-link IP (192.168.0.99 as an example) in the conection box and CONNECT when terminal window oppens user: root pass: [your password] ( you have to set a pass in the web !!!) then after logging in type : "screen -r" that's it +100
|
|
|
I received my HEX8, compiled cgminer with --enable-hexminerb and --enable-hexminer8. It detects my 3 HEX16B and the HEX8A1, but the hashrate of the HEX8A1 is displayed as zero (while the hexBs work OK). What could be the problem? Also, the fan is quite loud What is the power to hex8? From same psu like your hexb's? Post clock and voltage pls
|
|
|
so 1.2th machines start shipping tomorrow? is this the word from AMT?
AMT. What do you say.... +++++10000000! The exiting news full speed production 27GH FREE increase in speed +20% power consumption increase for free of course and shipping next week.....or to be precised 7th week of February but not later than 8 week of march whatever that means
|
|
|
so 1.2th machines start shipping tomorrow? is this the word from AMT?
Welcome to the feature dude 31 of March sounds like tomorrow, does it? According to their latest info they have 4 lines making PCB at full speed so hope dies last Patiance
|
|
|
Ok got Bad Boy on it's own PSU and TP-Link and now it's hashing! 220GH/260W Some hardware errors, that's probably the caps with bad legs. Still has green and orange light. Bad Boy hates company! I'll try and tape out the +5V and Ground in the USB cable and see if that makes him play nice with the others! Gator I am repeating this constantly over and over give it more voltage to reduce hw errors they are pretty good now
|
|
|
Sites up, same price. Feb 28 shipping, no thanks.
Can you show me what out there is a better hash/dollar that is shipping in two weeks? It does not matter dude you will loose money for sure. When there is nothing to buy just pass it or by btc instead
|
|
|
I see, so different PSU on one host.
Yeah, I figure out when powering 6x Hex16b, if you use a power protected hub, multiple PSU works fine. I noticed some lose Capacitor legs on this bad Hex8A1. Maybe they got broken in packing or shipping but the one on the right looks like a horrible solder joint. Not sure if this would stop it hashing though. I'm not an expert at electronics. Wish I was! Look like the voltage stand on 800mv even with 1000mv setting. Actually my board also had same broken capacitor leg but cause by my self . But i just join it with his friend there( the one you point by single red arrow) Did yours stop working with broken capacitor leg? I pushed the legs to touch the nearest resistor. It powered up with it's sister 220/880 ran for 5 mins, then crashed the power supply. The bad one had green and orange light as always. The good one had two green lights and a red light after crashing. After rebooting the good one went back to two green lights and started working. The bad one refused to reboot again. I think there is some charge building up in the bad one after 5mins which causes the PSU to trip failsafe, then that charge is still held for some time, which stops it rebooting back up, but a day later it will. I'm going to give it one last try and run it on it's own TP-Link. How do I upgrade an old TP-Link from 0_1_0 to 0_2_0? Do I flash the "factory.bin" file or do I use the "sysupgrade.bin" file. It's not in factory condition anymore, so I guess it's an upgrade, but I've only seen people mention the factory file? Syspgrade is ok. Make sure after upgrade you fill all web boxes and leave nothing empty in cgminer config except pools if you are using less than three
|
|
|
Help me if I'm doing it wrong, but at current low BTC price it will take over one year with a slightly overclocked Antminer to get back the BTC I have to pay to get one.
I live in Germany. I have the option to buy one for 1499 Euros at Amazon or 1699 Euro (ebay) or equivalent in BTC if I want one in the next few days and don't want to pay and wait extra for customs.
At 500 Euros per BTC at Bitcoin.de (optimistic to actually get 500 right now) the miner would cost roughly 3 Bitcoins. When I run mining calculations at btcinvest.net and take a conservative view, use 420 Watts of power overclocked, expect a 20% jump each diff adjustment, take 5% price increase of BTC/USD per jump it will take til summer to ROI in USD value and over a year to ROI in BTC. I'm much better off buying more bitcoins at a bargain for 500 Euros, am I not?
Of course you are! I have written a lot in his tread especially about roi but I was blamed to be a trol. As I told many times we are forced to choose the better from the worst deals around. An the only thing left is to struggle for roi. Ants is the best deal but there is plenty of room for price reduction. And it will never make roi.it is obvious that he can not scale with installation so I wish him to keep his chips in a safe place away from mining The big issue is that regular business is making 20-30% profit, but all chip suppliers want at least 50-100 times profit for their chip. I have had enough with nre cost bulshit. Let them keep their chips and their miner. For instance with imaginary cost of 0.5 btc there will be a plenty of room for manufacturer profit which he deserves and some hope for us to make a bug but that is what is called greed
|
|
|
After playing with various setting, this is my final result Locking good zich congrats
|
|
|
And tell us how exactly you connect to internet, you devices(modem,router,hub,switch)?
Hi, I have TpLink is connected to LinkSys EF4116 16port switch and that is connected to Inteno FG500 (model is determined by google picture shearch). Inteno is property of my ISP and it is located in my basement, it is locked so that I can not change any settings on it. My problem is that TpLink and also my Raspberry pi (with couple of yellow jackets) are not accessible when connected as stated. When I plug those directly to my laptop I can connect (putty) to those, but when online can't find those. They are hashing okei, but I can't view status or change setting without unplugging them from internet and connecting to my laptop Pick a dum eight port socho switch Connect all your minig gear + laptop to it Pick a wire which has internet and connect it there also. The chance for your and minig stuff not to have internet is low most probably it would be ok They have some kind of port isolation on your way
|
|
|
I have a question. I have ~0.01% HW errors, but my Rejects or Refuses are quite high. How can I get rid of them? Do I use the wrong clock setting? Does this cause my variable btc reward at my pool, because normally it was really stable. As zich said you are golden
|
|
|
Oh, btw, AMT quietly upped their power consumption yet again
Power Usage 900w-1200w
Im shocked!
Une more update is comming) And of course for max speed you shoul look at higher value
|
|
|
|