kryptoc007
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 17, 2014, 10:50:21 PM |
|
https://bitcointalk.org/index.php?topic=344970.06. I see "x" in the ASIC Status For the ASIC status wise, "x" doesn't necessary means the chip is faulty or failing. If the hashing power seems to be affected, please check your PSU and wiring and reboot and check the status a few times. It should go back to an average 168-180 gh/s range per AntMiner. when you are getting "x" on the ASIC chip status, please turn off the antminer and double check your PSU cables are connected well and restart. Check the status in about 5 minutes and every 30 minutes for a few hours and see if the "x" are showing up constantly at the same chip or randomly changes or completely disappear. "x's" do indicate the chip is failing or having issues---to my knowledge. power off the ant, give it a minute, then power back on....check if the Asics still have "x's".....contact either Sushi or Bitmain and ask them as to what they advise. AND most definitely check your hashing speed with another site, slush is not the best for indicating speed, that site has had all kinds of issues lately. thanks everyone for the help. After powering off/on I see only 2 Xs, but since I get approx 180 GH/s, I am going to leave it at that.
|
|
|
|
S.Z.
Newbie
Offline
Activity: 16
Merit: 0
|
|
February 18, 2014, 12:08:10 AM |
|
For best work antminer you must use local stratum proxy (in your network, ping must be 1-2ms) then speed goes to 200Gh\s
I know that antminer kan works without local proxy, but speed is lower for 30-40%.
|
|
|
|
Epoch
Legendary
Offline
Activity: 922
Merit: 1003
|
|
February 18, 2014, 12:14:53 AM |
|
For best work antminer you must use local stratum proxy (in your network, ping must be 1-2ms) then speed goes to 200Gh\s
I know that antminer kan works without local proxy, but speed is lower for 30-40%.
Can anyone confirm this with the newer AntMiners?
|
|
|
|
canford
|
|
February 18, 2014, 12:23:43 AM |
|
I am running two Antminers, no proxy, just pointed them at pool. Used wired Ethernet, left WiFi alone. Stable at 203-204 GH/s each.
|
Пoльзyйтecь бecплaтнo и пишитe чтo вaм нyжнo yлyчшить:trd.ai Bидeo, кaк пoльзoвaтьcя пpoeктoм:https://www.youtube.com/watch?v=pNhx715vOOk&feature=youtu.be
|
|
|
pvnamk19
|
|
February 18, 2014, 12:30:10 AM |
|
@kryptoc007: One of my Ants has xx on ASIC status and I just download the latest firmware from https://github.com/AntMiner/AntGen1/tree/master/firmware- Download antMiner_openwrt20140207.bin to your computer. - At Ant web page: select System => Backup/Flash Firmware and update the new firmware => proceed to reboot. In my case I just use frequency 375 MHZ because I want to keep their Temp around 47-48: it boosts around 10GHz/ant. Hope this help!
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
February 18, 2014, 03:27:37 AM |
|
For best work antminer you must use local stratum proxy (in your network, ping must be 1-2ms) then speed goes to 200Gh\s
I know that antminer kan works without local proxy, but speed is lower for 30-40%.
Can anyone confirm this with the newer AntMiners? I have a dozen and at least one from almost every GB. Never heard of this and never have a speed issue using ethernet.
|
|
|
|
meornot69
Member
Offline
Activity: 87
Merit: 10
|
|
February 18, 2014, 03:51:27 AM |
|
hi,
Network Protocol Source Destination Transfer IPV4 TCP 192.168.0.244:57834 unknown.servercentral.net:3333 14.58 KB (107 Pkts.) IPV4 TCP 192.168.0.103:52635 192.168.0.244:80 6.55 KB (62 Pkts.) IPV4 TCP 192.168.0.103:52637 192.168.0.244:80 2.57 KB (36 Pkts.) IPV4 UDP 192.168.0.244:47585 wonder.bluepink.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:58324 ntp2.dooh.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:45263 wonder.bluepink.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:46730 ups.alsys.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:54204 ups.alsys.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:44309 89.149.54.18:123 76.00 B (1 Pkts.)
someone knows? what do they do those connections on upd port 123?
|
|
|
|
jedimstr
|
|
February 18, 2014, 03:57:30 AM |
|
hi,
Network Protocol Source Destination Transfer IPV4 TCP 192.168.0.244:57834 unknown.servercentral.net:3333 14.58 KB (107 Pkts.) IPV4 TCP 192.168.0.103:52635 192.168.0.244:80 6.55 KB (62 Pkts.) IPV4 TCP 192.168.0.103:52637 192.168.0.244:80 2.57 KB (36 Pkts.) IPV4 UDP 192.168.0.244:47585 wonder.bluepink.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:58324 ntp2.dooh.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:45263 wonder.bluepink.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:46730 ups.alsys.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:54204 ups.alsys.ro:123 76.00 B (1 Pkts.) IPV4 UDP 192.168.0.244:44309 89.149.54.18:123 76.00 B (1 Pkts.)
someone knows? what do they do those connections on upd port 123?
NTP - network time protocol Your Antminer is updating/syncing it's clock. Normal.
|
|
|
|
freebit13
|
|
February 18, 2014, 07:15:55 AM |
|
https://bitcointalk.org/index.php?topic=344970.06. I see "x" in the ASIC Status For the ASIC status wise, "x" doesn't necessary means the chip is faulty or failing. If the hashing power seems to be affected, please check your PSU and wiring and reboot and check the status a few times. It should go back to an average 168-180 gh/s range per AntMiner. when you are getting "x" on the ASIC chip status, please turn off the antminer and double check your PSU cables are connected well and restart. Check the status in about 5 minutes and every 30 minutes for a few hours and see if the "x" are showing up constantly at the same chip or randomly changes or completely disappear. "x's" do indicate the chip is failing or having issues---to my knowledge. power off the ant, give it a minute, then power back on....check if the Asics still have "x's".....contact either Sushi or Bitmain and ask them as to what they advise. AND most definitely check your hashing speed with another site, slush is not the best for indicating speed, that site has had all kinds of issues lately. thanks everyone for the help. After powering off/on I see only 2 Xs, but since I get approx 180 GH/s, I am going to leave it at that. I had a bunch of X's showing up randomly, but proper cooling seems to have fixed the issue: https://bitcointalk.org/index.php?topic=355387.msg5174775#msg5174775
|
Decentralize EVERYTHING!
|
|
|
papamoi
|
|
February 18, 2014, 07:16:13 AM |
|
hi guys
i ve tried to set it up:
the machine is rebooting and after worker config
(i m not sure how to write the pools adress ,need to write the startum+tcp or not?
i don t see anything appearing in miner status and the machine is keeping on reboot every 2/3 min
solution guys??
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
February 18, 2014, 07:22:25 AM Last edit: February 18, 2014, 07:37:25 AM by loshia |
|
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
February 18, 2014, 08:00:47 AM |
|
Not to defend him,but if his network is anything other than...modem-->router,it can be a bit of a bear But setting up a pool addy (check at your pool's website for instructions) in these is too simple,hell,I'm a moron in regard to networking & software. I can't even compile CGminer & I had my Ants up & mining in about 5 minutes,had to wait for changes to take effect took half that time up
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
February 18, 2014, 08:04:01 AM |
|
Not to defend him,but if his network is anything other than...modem-->router,it can be a bit of a bear But setting up a pool addy (check at your pool's website for instructions) in these is too simple,hell,I'm a moron in regard to networking & software. I can't even compile CGminer & I had my Ants up & mining in about 5 minutes,had to wait for changes to take effect took half that time up I am thankful in behalf of papmoi Thank you vey much Unacceptable Papamoi, as you see even morons can cope with such things. I am wondering if bigger idiot theory still works Or you papamoi are the biggest idiot of them all
|
|
|
|
papamoi
|
|
February 18, 2014, 08:14:44 AM |
|
Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?
some told me they have remove the stratum+tcp
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
February 18, 2014, 08:16:24 AM |
|
Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?
some told me they have remove the stratum+tcp
Seriously,what pool are you trying to connect too
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
papamoi
|
|
February 18, 2014, 08:26:13 AM |
|
Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?
some told me they have remove the stratum+tcp
Seriously,what pool are you trying to connect too bitminter, and else
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
February 18, 2014, 09:12:20 AM |
|
Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?
some told me they have remove the stratum+tcp
Seriously,what pool are you trying to connect too bitminter, and else Ok,give me a little while,I'm mining there now to see what works It connected & started mining,but makin sure I get full power!! stratum+tcp://mint.bitminter.com:3333 is what I'm using...for the moment.
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
papamoi
|
|
February 18, 2014, 09:25:12 AM |
|
Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?
some told me they have remove the stratum+tcp
Seriously,what pool are you trying to connect too bitminter, and else Ok,give me a little while,I'm mining there now to see what works It connected & started mining,but makin sure I get full power!! stratum+tcp://mint.bitminter.com:3333 is what I'm using...for the moment. did you had to manage anything in the router port? so stratum+tcp is fine? maybe the issue of rebooting is coming from my psu...
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
February 18, 2014, 09:32:06 AM |
|
Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?
some told me they have remove the stratum+tcp
Seriously,what pool are you trying to connect too bitminter, and else Ok,give me a little while,I'm mining there now to see what works It connected & started mining,but makin sure I get full power!! stratum+tcp://mint.bitminter.com:3333 is what I'm using...for the moment. did you had to manage anything in the router port? so stratum+tcp is fine? maybe the issue of rebooting is coming from my psu... Why mess with the router I found some pools just don't like some miner units too so theres that My Klondikes didn't like slush's pool at all No issues at all....except ATM getting 154GH,instead of 179 But its early still,I'll give it an hour or so,I got a few satoshi's I want outta there anyhow Edit:Workin fine!! 179GH showin on Bitminter What PSU are you using Model #
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
February 18, 2014, 10:18:21 AM Last edit: February 18, 2014, 10:46:21 AM by loshia |
|
Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?
some told me they have remove the stratum+tcp
Seriously,what pool are you trying to connect too bitminter, and else I am faltered papamoi I am wandering when the turn of your ass will come? Oh yeah i forgot your ass is too busy to hash with such many chips inside, and me licking your ass can cause surge in fart pressure which will prevent chips from hashing. Since this is the only one working project you have at the moment we are not going to allow this to happen papamoi:some told me they have remove the stratum+tcp What makes your idiot are your own actions and you have to take the consequences of them What makes a BRAINLESS idiot is that you do not even think what someone told you as we can see What if the same guy told you that you are brainless idiot? i am sure that he will be quite right about it papamoj:Beside this gay loashia who keep on licking everybody ass You know papamoi that everybody as you say are CONSTANTLY telling you that you are COMPLETE BRAINLESS IDIOT, but they use more soft words to explain what they think. More over i am damn sure that no matter how deeply i wish to lick their ass they will not allow me to do it Which means that you are brainless idiot and i am not an ass licker
|
|
|
|
|