Bitcoin Forum
June 16, 2024, 07:49:36 AM *
News: Voting for pizza day contest
 
  Home Help Search Login Register More  
  Show Posts
Pages: « 1 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 [73] 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 »
1441  Bitcoin / Mining software (miners) / Re: CgminerMonitor.com - cloud monitor for all your miners! on: May 11, 2014, 07:41:44 AM

I've just published new client version. Could you update the client and send me the dump file, which will be created after running new client with parameter: dumpFile=blademinerissue.txt? As always, you can download the new version from here: http://cgminermonitor.com/GetStarted

Hi i have downloaded the new client and installed / ran it the same way with the extra option but it did nothing apart from send the data to the website 

what did i do wrong

I am very sorry, I haven't gave you precise instructions. Be sure to run it with extra parameter like this:
Code:
./CgminerMonitorClientX64Linux -dumpFile=blademinerissue
then the file blademinerissue should be created.

Hi o k i did this but all i get is this

./CgminerMonitorClientX86Custom -dumpFile=blademinerissue

Unhandled Exception: NDesk.Options.OptionException: Cannot bundle unregistered option '-u'.
  at NDesk.Options.OptionSet.ParseBundledValue (System.String f, System.String n, NDesk.Options.OptionContext c) [0x00000] in <filename unknown>:0
  at NDesk.Options.OptionSet.Parse (System.String argument, NDesk.Options.OptionContext c) [0x00000] in <filename unknown>:0
  at NDesk.Options.OptionSet.Parse (IEnumerable`1 arguments) [0x00000] in <filename unknown>:0
  at CgminerMonitorClient.Program.Main (System.String[] args) [0x00000] in <filename unknown>:0
[ERROR] FATAL UNHANDLED EXCEPTION: NDesk.Options.OptionException: Cannot bundle unregistered option '-u'.
  at NDesk.Options.OptionSet.ParseBundledValue (System.String f, System.String n, NDesk.Options.OptionContext c) [0x00000] in <filename unknown>:0
  at NDesk.Options.OptionSet.Parse (System.String argument, NDesk.Options.OptionContext c) [0x00000] in <filename unknown>:0
  at NDesk.Options.OptionSet.Parse (IEnumerable`1 arguments) [0x00000] in <filename unknown>:0
  at CgminerMonitorClient.Program.Main (System.String[] args) [0x00000] in <filename unknown>:0


thanks
Paul
1442  Bitcoin / Mining software (miners) / Re: CgminerMonitor.com - cloud monitor for all your miners! on: May 09, 2014, 02:56:57 AM
no problem they should both be around 15mh/s now

I've just published new client version. Could you update the client and send me the dump file, which will be created after running new client with parameter: dumpFile=blademinerissue.txt? As always, you can download the new version from here: http://cgminermonitor.com/GetStarted

Hi i have downloaded the new client and installed / ran it the same way with the extra option but it did nothing apart from send the data to the website 

what did i do wrong
1443  Alternate cryptocurrencies / Mining (Altcoins) / Re: [Minera] New web management system for Gridseed devices on: May 07, 2014, 10:36:57 PM
any chance this can be used on a linux PC ?
1444  Alternate cryptocurrencies / Mining (Altcoins) / Re: [Minera] New web management system for Gridseed devices on: May 07, 2014, 08:22:43 PM
looks very nice i will have a go with this
1445  Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE] GridSeed GC3355 5 Chip Setup/power/windows/linux/rpi by UnicornHasher on: May 07, 2014, 08:15:11 PM

Hey! Thanks a lot mate! Worked perfectly!



no problem at all mate
1446  Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE] GridSeed GC3355 5 Chip Setup/power/windows/linux/rpi by UnicornHasher on: May 03, 2014, 09:43:59 PM
Hi there!
Uh... reading the post looks like I might have gotten into something bigger than what I can handle but I still want to be part of this.

I'm in UBUNTU 13.10 and I don't seem to be able to get past the building cgminer step:
Quote
Build cgminer:
Code:
cd ~/usb-miner/software/cgminer
./autogen.sh
CFLAGS="-O2 -Wall -march=native" ./configure --enable-gridseed
make
cd


whenever I type ./autogen.sh it prompts:
bash: ./autogen.sh: no such file or directory

Any ideas why this happens?

ok hers what i did



ok heres what i did
make sure you are sudo su to root
cd   
apt-get install build-essential libtool libcurl4-openssl-dev libncurses5-dev libudev-dev autoconf automake screen
wget http://curl.haxx.se/download/curl-7.34.0.tar.bz2
wget http://www.digip.org/jansson/releases/jansson-2.5.tar.bz2
tar -xvf curl-7.34.0.tar.bz2
cd curl-7.34.0
./configure
make
make install
cd ..

tar -xvf jansson-2.5.tar.bz2
cd jansson-2.5
./configure
make
make install
wget http://ftp.osuosl.org/pub/ubuntu/pool/main/a/automake1.11/automake1.11_1.11.6-2_all.deb
sudo dpkg -i automake1.11_1.11.6-2_all.deb
sudo ln -s /usr/local/lib/libjansson.* /usr/lib/
cd ..
git clone https://github.com/jmordica/cgminer-gc3355
if you have a problem with git then use  'apt-get install git'
cd cgminer-gc3355/
./configure --enable-scrypt --enable-gridseed
make

Thats it your done
./cgminer --gridseed-options=baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0 --hotplug=0


this works on Ubuntu 13.10  and the new version 14 Ubuntu

Hope this helps you out.


1447  Bitcoin / Mining software (miners) / Re: CgminerMonitor.com - cloud monitor for all your miners! on: May 01, 2014, 07:24:51 PM
Hi
i have upgraded my miners to Gridseed blades but i can see that they are alive but I'm not getting the speed

http://cgminermonitor.com/Shared/3478e7c38ba04ac2ba30e5765dcb4d6a0

Blademiner1 should be around 25Mh/s

Blademiner2 should be around 5.2Mh/s



thanks

Thanks pjcltd for reporting that. I'll investigate the issue and let you know about results.
no problem they should both be around 15mh/s now
1448  Bitcoin / Hardware / Re: [Antminer S1 Sales open] Price changes daily, now 0.55 BTC for 180GH/s on: May 01, 2014, 06:24:47 PM
Looking for 2 S1 coupons from a trustworthy member please.  I'm in NJ if that matters, don't know how the coupon transaction would work...
I have 21 s1 coupon. you can contact me if needed. I can go through escrow if you need it.

Thanks.

I'll vouch for s1lverbox i have done loads of trades with her all good no problems at all
1449  Bitcoin / Mining software (miners) / Re: CgminerMonitor.com - cloud monitor for all your miners! on: April 30, 2014, 10:41:36 AM
Hi
i have upgraded my miners to Gridseed blades but i can see that they are alive but I'm not getting the speed

http://cgminermonitor.com/Shared/3478e7c38ba04ac2ba30e5765dcb4d6a0

Blademiner1 should be around 25Mh/s

Blademiner2 should be around 5.2Mh/s



thanks
1450  Bitcoin / Hardware / Re: [Antminer S1 Sales open] Price changes daily, now 0.619 BTC for 180GH/s on: April 26, 2014, 11:52:36 PM
got my coupon for .13  Ant S1 ordered
1451  Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE] GridSeed Blade (80 Chip) Miner Support/Tuning on: April 26, 2014, 03:10:33 PM
And you read the warnings


Popular cgminer 3.7.2 is not supported due to the bug in the code. You have to use newer miner. Read FAQ to learn more about it.

Found here

https://nicehash.com/?p=gstarted
1452  Bitcoin / Mining support / Re: cgminer on Ubuntu 12.04 on: April 26, 2014, 01:08:26 PM
Why not list the kit you have then others might be able to help you out

1453  Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE] GridSeed Blade (80 Chip) Miner Support/Tuning on: April 26, 2014, 10:57:33 AM
hi jmordica,

I have a problem with your cgminer with my G-Blade Gridseed (40 chip on board) .

On only one autoswitch pool (not all), when it switch to currency, all shares are reject with this error message:
share is above target rejected

I try to modify diff but i have the same problem.
To solve the problem i must switch to backup pool and when I switch again to the autoswitch pool, that works very fine until pool switch to currency.

Have you an idea to solve the problem ?
What pool are you getting this error on?
I will see if I can point my blades at it and see if I get the same issues
1454  Bitcoin / Mining software (miners) / Re: CgminerMonitor.com - cloud monitor for all your miners! on: April 25, 2014, 11:07:05 PM
@Dophoeve, @pjcltd and others: share feature is done!
You can share your whole dashboard or just dashboard of one miner. For example, here are my private miners: http://cgminermonitor.com/Shared/da5cbaed907a425fb56be08f8a5daa0b0

Full share of one miner is still under development - due to some problems it will be available much later...
Hope that dashboard share is good for now Smiley

Good stuff
its working for me
http://cgminermonitor.com/Shared/9d6f9258cf3648e6ba06ccde947e630e1

I see that you have zeros in max indicator - zero for max temperature and zero for max fan percents. Quick fix and you don't have ugly zeros anymore.
Glad you like it!
BTW. Nice miner you have there...

thanks for the fix
i have 32 Greedseed miners
my other rig has 3 Gridseed blades but its not up yet im still rebuilding it
keep up the good work

1455  Bitcoin / Mining software (miners) / Re: CgminerMonitor.com - cloud monitor for all your miners! on: April 25, 2014, 07:48:46 PM
@Dophoeve, @pjcltd and others: share feature is done!
You can share your whole dashboard or just dashboard of one miner. For example, here are my private miners: http://cgminermonitor.com/Shared/da5cbaed907a425fb56be08f8a5daa0b0

Full share of one miner is still under development - due to some problems it will be available much later...
Hope that dashboard share is good for now Smiley

Good stuff
its working for me
http://cgminermonitor.com/Shared/9d6f9258cf3648e6ba06ccde947e630e1
1456  Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE] GridSeed Blade (80 Chip) Miner Support/Tuning on: April 24, 2014, 07:46:33 PM

I fixed it
i will post the full info when i get home


Yes i know that this is on this thread and others BUT
it can get confusing for some of us OLD gits
so i thought i would do it command by command


ok heres what i did
make sure you are sudo su to root
cd   
apt-get install build-essential libtool libcurl4-openssl-dev libncurses5-dev libudev-dev autoconf automake screen
wget http://curl.haxx.se/download/curl-7.34.0.tar.bz2
wget http://www.digip.org/jansson/releases/jansson-2.5.tar.bz2
tar -xvf curl-7.34.0.tar.bz2
cd curl-7.34.0
./configure
make
make install
cd ..

tar -xvf jansson-2.5.tar.bz2
cd jansson-2.5
./configure
make
make install
wget http://ftp.osuosl.org/pub/ubuntu/pool/main/a/automake1.11/automake1.11_1.11.6-2_all.deb
sudo dpkg -i automake1.11_1.11.6-2_all.deb
sudo ln -s /usr/local/lib/libjansson.* /usr/lib/
cd ..
git clone https://github.com/jmordica/cgminer-gc3355
if you have a problem with git then use  'apt-get install git'
cd cgminer-gc3355/
./configure --enable-scrypt --enable-gridseed
make

Thats it your done
./cgminer --gridseed-options=baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0 --hotplug=0


this works on Ubuntu 13.10  and the new version 14 Ubuntu

Hope this helps someone out.


1457  Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE] GridSeed Blade (80 Chip) Miner Support/Tuning on: April 24, 2014, 10:15:17 AM
Hi Gus
i just built my self a new linux box to run my 3 blades
and i have install ubuntu 13.10

i have installed cgminer and it runs the blades but i not get the top information on the screen all i  get is this


 [2014-04-24 08:38:26] Accepted 0aa45cf6 Diff 24/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 07f34bb6 Diff 32/16 GSD 0                     
 [2014-04-24 08:38:27] Accepted 0112108e Diff 239/16 GSD 1                     
 [2014-04-24 08:38:27] Accepted 099c6168 Diff 27/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 033420b0 Diff 80/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 089b1861 Diff 30/16 GSD 1                     
 [2014-04-24 08:38:27] Accepted 0e737b94 Diff 18/16 GSD 0                     
 [2014-04-24 08:38:27] Accepted a2e955ca Diff 402/16 GSD 1                     
 [2014-04-24 08:38:27] Accepted 0fabc030 Diff 16/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 089de2e9 Diff 30/16 GSD 1                     
 [2014-04-24 08:38:27] Found block for pool 0!                   
 [2014-04-24 08:38:27] Accepted 03d1b0cb Diff 17.2K/16 BLOCK! GSD 1                     
 [2014-04-24 08:38:27] Accepted 07ec563a Diff 32/16 GSD 2                     
 [2014-04-24 08:38:27] Network diff set to 0                   
 [2014-04-24 08:38:27] Stratum from pool 0 detected new block                   
 [2014-04-24 08:38:28] Accepted 065791ac Diff 40/16 GSD 0                     
 [2014-04-24 08:38:28] Accepted 0bd6f158 Diff 22/16 GSD 2                     
 [2014-04-24 08:38:28] Accepted 01e0cf13 Diff 136/16 GSD 0                     
 [2014-04-24 08:38:29] Accepted 083ef6a2 Diff 31/16 GSD 3                     
 [2014-04-24 08:38:29] Accepted 0de70908 Diff 18/16 GSD 3                     
 [2014-04-24 08:38:29] Accepted 0744833f Diff 35/16 GSD 1                     
 [2014-04-24 08:38:29] Accepted 074cded0 Diff 35/16 GSD 1               

any ideas what i did wrong ??

You have a problem with your curses dev Library if you want  top information you must install curses dev Library and compile cgminer with it.

Quote
Optional:
   curl dev library    http://curl.haxx.se/libcurl/
   (libcurl4-openssl-dev - Must tell configure --disable-libcurl otherwise
   it will attempt to compile it in)

   curses dev library
   (libncurses5-dev or libpdcurses on WIN32 for text user interface)

   libudev dev library (libudev-dev)
   (This is only required for USB device support and is linux only)

CGMiner specific configuration options:

--without-curses        Compile support for curses TUI (default enabled)


still the same
this is what i used


Install Pre-Requisites:
Code:
sudo -s
apt-get update
apt-get install build-essential libtool libcurl4-openssl-dev libncurses5-dev libudev-dev autoconf automake screen

Grab possibly needed packages:
Code:
cd
wget http://curl.haxx.se/download/curl-7.34.0.tar.bz2
wget http://www.digip.org/jansson/releases/jansson-2.5.tar.bz2

Install curl and jansso packages:
Code:
tar -xvf curl-7.34.0.tar.bz2
cd curl-7.34.0/
./configure
make
make install
cd

Code:
tar -xvf jansson-2.5.tar.bz2
cd jansson-2.5/ 
./configure
make
make install
cd


I fixed it
i will post the full info when i get home
1458  Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE] GridSeed Blade (80 Chip) Miner Support/Tuning on: April 24, 2014, 08:34:26 AM
Hi Gus
i just built my self a new linux box to run my 3 blades
and i have install ubuntu 13.10

i have installed cgminer and it runs the blades but i not get the top information on the screen all i  get is this


 [2014-04-24 08:38:26] Accepted 0aa45cf6 Diff 24/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 07f34bb6 Diff 32/16 GSD 0                     
 [2014-04-24 08:38:27] Accepted 0112108e Diff 239/16 GSD 1                     
 [2014-04-24 08:38:27] Accepted 099c6168 Diff 27/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 033420b0 Diff 80/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 089b1861 Diff 30/16 GSD 1                     
 [2014-04-24 08:38:27] Accepted 0e737b94 Diff 18/16 GSD 0                     
 [2014-04-24 08:38:27] Accepted a2e955ca Diff 402/16 GSD 1                     
 [2014-04-24 08:38:27] Accepted 0fabc030 Diff 16/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 089de2e9 Diff 30/16 GSD 1                     
 [2014-04-24 08:38:27] Found block for pool 0!                   
 [2014-04-24 08:38:27] Accepted 03d1b0cb Diff 17.2K/16 BLOCK! GSD 1                     
 [2014-04-24 08:38:27] Accepted 07ec563a Diff 32/16 GSD 2                     
 [2014-04-24 08:38:27] Network diff set to 0                   
 [2014-04-24 08:38:27] Stratum from pool 0 detected new block                   
 [2014-04-24 08:38:28] Accepted 065791ac Diff 40/16 GSD 0                     
 [2014-04-24 08:38:28] Accepted 0bd6f158 Diff 22/16 GSD 2                     
 [2014-04-24 08:38:28] Accepted 01e0cf13 Diff 136/16 GSD 0                     
 [2014-04-24 08:38:29] Accepted 083ef6a2 Diff 31/16 GSD 3                     
 [2014-04-24 08:38:29] Accepted 0de70908 Diff 18/16 GSD 3                     
 [2014-04-24 08:38:29] Accepted 0744833f Diff 35/16 GSD 1                     
 [2014-04-24 08:38:29] Accepted 074cded0 Diff 35/16 GSD 1               

any ideas what i did wrong ??

You have a problem with your curses dev Library if you want  top information you must install curses dev Library and compile cgminer with it.

Quote
Optional:
   curl dev library    http://curl.haxx.se/libcurl/
   (libcurl4-openssl-dev - Must tell configure --disable-libcurl otherwise
   it will attempt to compile it in)

   curses dev library
   (libncurses5-dev or libpdcurses on WIN32 for text user interface)

   libudev dev library (libudev-dev)
   (This is only required for USB device support and is linux only)

CGMiner specific configuration options:

--without-curses        Compile support for curses TUI (default enabled)


still the same
this is what i used


Install Pre-Requisites:
Code:
sudo -s
apt-get update
apt-get install build-essential libtool libcurl4-openssl-dev libncurses5-dev libudev-dev autoconf automake screen

Grab possibly needed packages:
Code:
cd
wget http://curl.haxx.se/download/curl-7.34.0.tar.bz2
wget http://www.digip.org/jansson/releases/jansson-2.5.tar.bz2

Install curl and jansso packages:
Code:
tar -xvf curl-7.34.0.tar.bz2
cd curl-7.34.0/
./configure
make
make install
cd

Code:
tar -xvf jansson-2.5.tar.bz2
cd jansson-2.5/ 
./configure
make
make install
cd
1459  Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE] GridSeed Blade (80 Chip) Miner Support/Tuning on: April 24, 2014, 07:38:48 AM
Hi Gus
i just built my self a new linux box to run my 3 blades
and i have install ubuntu 13.10

i have installed cgminer and it runs the blades but i not get the top information on the screen all i  get is this


 [2014-04-24 08:38:26] Accepted 0aa45cf6 Diff 24/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 07f34bb6 Diff 32/16 GSD 0                     
 [2014-04-24 08:38:27] Accepted 0112108e Diff 239/16 GSD 1                     
 [2014-04-24 08:38:27] Accepted 099c6168 Diff 27/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 033420b0 Diff 80/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 089b1861 Diff 30/16 GSD 1                     
 [2014-04-24 08:38:27] Accepted 0e737b94 Diff 18/16 GSD 0                     
 [2014-04-24 08:38:27] Accepted a2e955ca Diff 402/16 GSD 1                     
 [2014-04-24 08:38:27] Accepted 0fabc030 Diff 16/16 GSD 3                     
 [2014-04-24 08:38:27] Accepted 089de2e9 Diff 30/16 GSD 1                     
 [2014-04-24 08:38:27] Found block for pool 0!                   
 [2014-04-24 08:38:27] Accepted 03d1b0cb Diff 17.2K/16 BLOCK! GSD 1                     
 [2014-04-24 08:38:27] Accepted 07ec563a Diff 32/16 GSD 2                     
 [2014-04-24 08:38:27] Network diff set to 0                   
 [2014-04-24 08:38:27] Stratum from pool 0 detected new block                   
 [2014-04-24 08:38:28] Accepted 065791ac Diff 40/16 GSD 0                     
 [2014-04-24 08:38:28] Accepted 0bd6f158 Diff 22/16 GSD 2                     
 [2014-04-24 08:38:28] Accepted 01e0cf13 Diff 136/16 GSD 0                     
 [2014-04-24 08:38:29] Accepted 083ef6a2 Diff 31/16 GSD 3                     
 [2014-04-24 08:38:29] Accepted 0de70908 Diff 18/16 GSD 3                     
 [2014-04-24 08:38:29] Accepted 0744833f Diff 35/16 GSD 1                     
 [2014-04-24 08:38:29] Accepted 074cded0 Diff 35/16 GSD 1               

any ideas what i did wrong ??
1460  Economy / Service Announcements / Re: Gridseed G-Blade official special promotion 11-22(Extended) Apr @ $1475 to $1610 on: April 24, 2014, 06:11:10 AM
Got my blade today and running smooth. Stock fan is annoyingly loud -> replaced with Arctic Cooling Freezer 7 Pro fan, silent & cool.
Thanks a bunch!  Smiley

Where did you get that fan from ?
Pages: « 1 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 [73] 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 »
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!