|
1 @ 4.5
Just in case there is increase in unit... or some bidder chickening out...
|
|
|
|
|
When does it ship?
2 @ 3.25
|
|
|
|
How does the micra interface with the PC or other controller? I'm assuming it's not USB.
Am I reading correctly that the micra hashes at 23.4 Terahashes per second?
Id presume 23.4 GH/s since these are bitfury based and sound about right for 9 chips. |
|
|
|
@Bordomboy
Are you using a powered hub?
do you have a ttyACM0 listed in your in /dev?
What command line are you starting bfgminer with?
At first I tried a hub, but couldn't find its power cord, so I plugged them directly into a USB expansion card installed on the machine. Yes, I found ttyAMC0 and ttyAMC1 in my /dev. I've been starting bfgminer with bfgminer -o stratum+tcp://us3.eclipsemc.com:3333 -u xxxxx -p xxxx -S bitfury:/dev/ttyACM0 You need to update your version of bfgminer I added theturtle1983 ppa as listed on the first page and I have the one maintained by unit3 added already, but it updated from what I was running to v. 3.3.0... I can't seem to get it to upgrade further. Perhaps 3.3.0 is called for with mint 13maya with xfce. (side note...since I ran all the updates this afternoon when I started this, the windows that open are missing the 'minimize/maximize/close' icons and I no longer have any control over their size...I also a missing 3 of the 4 desktops the settings say I have. weird) But as long as I'm getting some mining done, I think I'm going to have to leave it for the night and come back to it tomorrow. You may need to change the target distribution name, see previous post at https://bitcointalk.org/index.php?topic=319419.msg3467818#msg3467818"In "software and updates", "other software" you have to change "saucy" to "raring" in the ppa." - your distribution may be different saucy doesnt need any change. Ive uploaded the build for saucy. |
|
|
|
Just resent my refund request to asic@garr255.com (last mail on sept 26th went ignored) |
|
|
|
Turtle's guide for making sha256 coins... FREE edition. Step 1 :- git clone https://github.com/bitcoin/bitcoin.git
cd bitcoin
find ./ -type f -exec sed -i 's/Bitcoin/Turtlecoin/' {} \;
find ./ -type f -exec sed -i 's/bitcoin/turtlecoin/' {} \;
find ./ -type f -exec sed -i 's/BTC/TTC/' {} \;
Step 2: *cough* premine *cough* Step 3: launch. |
|
|
|
Just requested my refund by E-mail now.
I requested 6 days ago |
|
|
|
New official version of cgminer, 3.5.0, now contains support for red/bluefury devices on linux and windows.
.deb for raspbian : https://mega.co.nz/#!HdZWXaJL!f8Tq2Td275SK1Dkv0KiBYAQQuFN00vfsuL3v7_cIrsE Instructions: sudo apt-get update #Make sure repos are up to date
sudo dpkg -i cgminer_3.5.0-1_armhf.deb #May complain about missing dependencies, dont panic next step takes care of it
sudo apt-get -f install #Installs the needed dependencies and then failed cgminer form above step. built using :- --disable-opencl --disable-adl --enable-bflsc --enable-bitforce --enable-icarus --enable-modminer --enable-ztex --enable-avalon --enable-bitfury |
|
|
|
New official version of cgminer, 3.5.0, now contains support for mining with BF1 devices on both linux and windows.
.deb for raspbian : https://mega.co.nz/#!HdZWXaJL!f8Tq2Td275SK1Dkv0KiBYAQQuFN00vfsuL3v7_cIrsE Instructions: sudo apt-get update #Make sure repos are up to date
sudo dpkg -i cgminer_3.5.0-1_armhf.deb #May complain about missing dependencies, dont panic next step takes care of it
sudo apt-get -f install #Installs the needed dependencies and then failed cgminer form above step. |
|
|
|
Thailand and Philippines are different countries and quite far apart. Also the storm had no affect anywhere close to Thailand.  |
|
|
|
This does look like the refund... from a week ago... @OP pls comment... |
|
|
|
Congrats on the iron throne... House Bitfury. The spider counseled it well. Stay out, watch House Avalon and BFL kill each other over the iron throne, then come and claim the seat.... well played sir.. respect. Winter has come early for us House FPGA... |
|
|
|
mine have been sitting "at local fedex facility" since ~40 hrs... need to call them tomorrow to know what up...
Finally got mine. They are all black colored ones and a few of the plastic cases got cracked. Not surprised considering how FedEx treats packages. All up and running and hashing away. I got mine few days ago... there was ~$5 in duty. so that explains the delays, it was waiting to be cleared by customs.... the invoice price was just above the free import threshold... |
|
|
|
One of the things you need to do is set a filter that will not allow coin names to be reused.
I was able to create Litecoin, Gamecoin, Worldcoin etc with a few simple inputs and clicks. Releasing these coins will cause wallets of the originals to be overwritten.
Just something to think about.
The Chatbox feature add was cool too.
Thanks,
~BCX~
I was under the impression that name collision a feature not a bug... |
|
|
|
Tired of waiting for a new alt coin of the day to come out? Want to create your own? Introducing the alt coin generator. You simply go to www.altcoingenerator.co and choose from the drop down menus and it will spit out the source code and a precompiled binary for your new alt coin. Some of the alt coin options: Name Script, no script number of coins total number of coins per block time between blocks number of pre-mine blocks to create icon Have a great idea for an alt coin? Use this app and become rich as everyone drops Bitcoin and starts using your coin. First 1000 alt coins are free. Limit 10 alt coins per user after that. Watch this quick how-to to get started: http://www.youtube.com/watch?v=oHg5SJYRHA0Edit: site is currently under construction as I turn this into a p2p distrubuted alt coin itself. Mining will spit out alt chains in blocks of 50 per 2 minutes. Maximum will be 2.1 billion. Is this serious? yes. The video very detailed. |
|
|
|
|
mine have been sitting "at local fedex facility" since ~40 hrs... need to call them tomorrow to know what up...
|
|
|
|
|
Show Posts
