Sorry 1 BTC is too low and I only will accept Euro.
And they are hashing right now (of course)... They are about 4 weeks "old".
|
|
|
Why would we pay 6btc for 4 when you can just get 4 direct from bitmaintech for less than 4btc shipped?
You can (only) pay with Euro and save your BTC. If you live in the EU you will save TAX+Import costs, which is in most countries between 100 to 150(+) euro per Miner. If you think they are too expensive for you, simply don't buy them from me
|
|
|
Als je er trouwens nog wat extra kan laten maken heb ik wel interesse ze zijn echt superstil
Je moet wel zelf Bitfury chips aanleveren... heb je deze ? zo niet, check de One String Miner https://bitcointalk.org/index.php?topic=495536.0 die zijn ook fluisterstil.
|
|
|
Als iker eentje voor 520€ (650 - 100 -30) kan komen halen heb je een deal! Zou je graag meer bieden maar ben maar een heel arme student die al lang spaart voor een mining farm. Ik heb wel ov dus kan m in ieder geval komen halen en heb plenty psu's...
PM me als je wat wilt regelen.
1 losse S1 zonder voeding bij afhaal = 670 euro
|
|
|
4x Antminer S1 Option 1: 4 pieces: NO PSU, free shipping within EU : 2800 2600 euro Option 2: 4 pieces: with PSU, free shipping within EU : 3000 2800 euro
Option 3: 2 pieces: NO PSU, free shipping within EU : 1450 1350 euro Option 4: 2 pieces: with PSU, free shipping within EU : 1550 1450 euro
Option 5: 1 piece : NO PSU, free shipping within EU : 750 700 euro Option 6: 1 piece : with PSU, free shipping within EU : 800 750 euro***** SOLD *****LIMITED OFFER valid from April 2 to April 6 (4 pm CET +1)
I will accept offers from 4 BTC for 4 Antminer S1 (without PSU)
- buy now 6 BTC - free shipping within Europe
Place you offer in a reply in this topic (bid increments 0.1 BTC)
You can also bid or make offer for ONE Antminer S1 starting from: 1.4 BTC (includes shipping within Europe)
If someone offers a fair price and/or buys all 4 in one buy he/she has the deal. Bid or offers on 1 Antminer will not get the deal (unfortunately)PSU is a Seasonic S12G 450W or Be quiet! Pure Power L8-600W Payment in euro by bank (SEPA) up front, or cash when picking the stuff up (Zuid Limburg, The Netherlands). Worldwide shipping add: 30 euroThey are overclocked to 200 GH/s thru cgminer-settings (no hardware mod). Hash between 180 and 205 GH/s. Factory settings can be restored if you want.
|
|
|
SUPER aanbieding, prijzen nog wat gedropped.
|
|
|
4x Antminer S1 in de SUPER aanbieding ! Optie 1: 4 stuks: exclusief voedingen, inclusief verzendkosten binnen EU : 2800 2600 euro Optie 2: 4 stuks: inclusief voedingen, inclusief verzendkosten binnen EU : 3000 2800 euro Optie 3: 2 stuks: exclusief voedingen, inclusief verzendkosten binnen EU : 1450 1350 euro Optie 4: 2 stuks: inclusief voedingen, inclusief verzendkosten binnen EU : 1550 1450 euro Optie 5: 1 stuk : exclusief voeding, inclusief verzendkosten binnen EU : 750 700 euro Optie 6: 1 stuk : inclusief voeding, inclusief verzendkosten binnen EU : 800 750 euro Voeding is een Seasonic S12G 450W of Be quiet! Pure Power L8-600W betaling in euro per bank vooraf, of contant bij afhaal (Zuid Limburg, NL). Bij afhaal uiteraard geen verzendkosten -/- 30 euro van het totaalbedrag. Ze zijn overclocked naar 200 GH/s d.m.v. aanpassing in cgminer-instellingen (geen hardware mod of zo). Hashen tussen de 180 en 205 GH/s. Kan weer terug geworden naar factorysetting als u wil.
|
|
|
@Ben @cscape .. any news on when Serial Bus will be working? does this depend on software settings/adjustments for like cgminer of bfgminer?
Serial Bus feature is awesome, if this works we will only need 1 USB cable.
|
|
|
Got my One String Miners today ! and... I loved them ! They are great. I have 4 DIY1 and 4 DIY2 kits. This evening I build up the 4 DIY2 kits and build a small tower. Quality of the boards and other materials is high. Building was very easy. Screw the pcb to the heatsink, connect the wires to the powerconnectors, that’s about it. I used a BeQuiet PurePower 600W PSU I had laying around. Attached two fans, all in a temporary setup. 10 Port USB Hub is a Rosewill RHB-500. I used an ArchLinux PC, downloaded and compiled CGminer 3.12.3, turned on the miners, started CGMiner and it detected all miners. 3 miners were “ZOMBIE” at first but after just 10 seconds all boards were recognized and hashing. All works great with any issues. Temperatuur is stable with only 2 fans (in the most efficient position), 30 to 40 degrees Celcius. I haven’t tuned them yet so they hash around 25GH/s per board. Photos: http://miningonmyown.com/2014/03/18/one-string-miner/Thank you for the compliments. With heat sinks, the board should do 30+ GH/s each, so no tuning should be necessary. Only if you want to go way over 30GH/s, you can overvolt them, but that voids your warranty. Thanks for the nice webpage too, I hope you don't mind me sending the link to some people Oh, and the boards are designed in Holland, but produced in Asia. No problem sending the link to people of course. I adjusted the text regarding the production in Asia. Next few days I will do more tests and tuning.
|
|
|
Got my One String Miners today ! and... I loved them ! They are great. I have 4 DIY1 and 4 DIY2 kits. This evening I build up the 4 DIY2 kits and build a small tower. Quality of the boards and other materials is high. Building was very easy. Screw the pcb to the heatsink, connect the wires to the powerconnectors, that’s about it. I used a BeQuiet PurePower 600W PSU I had laying around. Attached two fans, all in a temporary setup. 10 Port USB Hub is a Rosewill RHB-500. I used an ArchLinux PC, downloaded and compiled CGminer 3.12.3, turned on the miners, started CGMiner and it detected all miners. 3 miners were “ZOMBIE” at first but after just 10 seconds all boards were recognized and hashing. All works great with any issues. Temperatuur is stable with only 2 fans (in the most efficient position), 30 to 40 degrees Celcius. I haven’t tuned them yet so they hash around 25GH/s per board. Photos: http://miningonmyown.com/2014/03/18/one-string-miner/
|
|
|
Only when I enter the IP address, written on the white sticker on the antminer, I get a black screen with the words 'LuCI - Lua Configuration Interface'. After a few seconds this screen disappears and there's no connection anymore.
I ran into the same problem. I think it is trying to load the interface but not able to. So the IP address is correct and you are connected to the S1. I would guess a power issue. What PSU are you using? has it got enough oomph? Corsair 600 Watt 80PLUS recommended. I'm using a 450w psu I used a few years back. Thought it would do the job. But if it's my psu, why did it load the interface the first time for me to change the wan settings? I didn't enter my mining credentials yet. a 450W psu from a few ago loses pwoer over the years, You should get a new/other PSU, at least 500W I would recommend. Is your network/PC in the same IP range as the Antminer? Your router and pc should have an IP 192.168.1.xxx . And have you tried another browser? like firefox ? is your Java up-to-date? maybe the antminer interface uses Java....
|
|
|
Leuk initiatief, ik hoop dat het een succes wordt.
Maar 1 tip, gebruik geen beeltenissen/portretten van leden van het koningshuis, ga je last mee krijgen want die mag je niet zomaar gebruiken. Je kan beter iets anders gebruiken, silhouet van Nederland of zo...
|
|
|
kick it ! Price is still 15 BTC
|
|
|
If anyone is still interested in the 2013 0.01BTC coin, I have some left on stock. Funded with 0.01BTC, comes in a small plastic bag, with certificate. Payment only in euro by Bank transfer (SEPA), 25 euro a piece, shipping worldwide from 3.5 euro I ship from the Netherlands within 1 (max 2) businessday after payment has been received. http://www.welcometothebitcoinshop.com/product/0-01-btc-microsoul-coin/Just to clear, I am not stealing this thread or trying to get in the (business)way of gravitate. I have a good business relationship with gravitate, he agrees on me (re)selling his designed and produced awesome coins.
|
|
|
Vanaf vandaag verkrijgbaar: 0.01 BTC Mircosoul coin [2013 uitvoering]. Prijs per stuk: 25 euro NU voor 20 euro !Veiliger bewaren van bitcoins kan niet, dit muntje heeft een bitcoinwaarde van 0.01 BTC. Bewaar hem in je kluis, spaarpot, broekzak en geen enkele hacker kan digitaal bij je bitcoins. We hebben gekozen voor een kleine nominale waarde 0.01 BTC nu kan iedereen voor een klein bedrag instappen in de wereld van Bitcoin. Nu lijkt 0.01 BTC weinig maar wie weet stijgt de waarde van de bitcoin in de toekomst tot een leuke hoogte. Het 0.01 Bitcoin muntje (MicroSoul genaamd) heeft een eigen uniek Bitcoinadres en aan de achterkant een speciale veiligheidsticker. Achter deze sticker zit de private key, waarmee je je wallet op het moment dat jij wil kan activeren en zo iets met de waarde van bitcoinmunt kan doen. Microsoul is de naam van de maker van deze munten, de munten zijn gemaakt van koper met een goudlaagje. De afwerking is van hoge kwaliteit. Wij hebben in 10 batches van 10 stuks de munt voorzien van 0.01 BTC. Bij de munt ontvangt u een certificaat met daarop het walletaddress (ook in vorm van een QR-code) en het transactie ID van de storting van de 0.01 BTC (zo kunt u controleren dat munt ook daadwerkelijk een waarde heeft van 0.01BTC). http://www.welcometothebitcoinshop.com/product/0-01-btc-microsoul-coin/Ook leuke coin om iemand cadeau te doen op zijn/haar verjaardag, je familie en vrienden bekend te maken met Bitcoin of verkoop ze op een beurs, koningsdag, etc. Betaling is standaard in euro per bankomschrijving vooraf. Bij wijze van uitzondering c.q. voor de BTC-bezitters wordt BTC geaccepteerd (Coinbase/Bitstamp/Kraken koers). Je kan ze bestellen via mijn webshop of je kan me een PM sturen. Mocht je er meerdere tegelijk bestellen (10+) dan krijg je uiteraard een leuke korting. Verzending is een envelop via reguliere post(nl), onverzekerd, verzendkosten binnen Nederland : 2 euro . Rest van EU+wereldwijd: 3,50 euro. Verzekerd opsturen kan op aanvraag.
|
|
|
I've got 500 chips from BitcoinValet. What is the cost for 31 boards?
I will get the quote for production early next week, I hope tuesday. Then I will post prizes.
|
|
|
I give it a rest while waiting for my order #2xxx and put my energy in positive things in life. Yeah, I lost money big time, feel scammed, neglected, ignored, not taken seriously as a customer but... I learned my (expensive) lesson: never ever preorder again. never trust a company who offers preorders or if you do preorder be aware of the risks involved including losing all your money (and maybe even more).
I take a cold beer now and I wonder how the people of bitmine.ch will live on the rest of their lives knowing they scammed, frustrated, misleaded and "stole" money/profit of thousands of people. You know what? I even feel a little bit sorry for them....
|
|
|
but whats the basis of 50% max? Nothing in the ToS right?
No, but only the "reinterpretation" by giorgiomassa in his "famous last words": https://bitcointalk.org/index.php?topic=291141.msg5362648#msg5362648I still strongly believe that any lawyer would agree that the CPP is supposed to continue until the device can be build.If not, one has to ask if giorgiomassa simply gambled and assumed/hoped that many people would rather give up and ask for a refund? A lawyer should investigate if giorgiomassa intentionally started this scheme so he could finance his business with our money, and pay us back our own money plus interest only after more than 5 months. (because that's about the duration bitmine owns your money, until they have to give it back) I read that too, but the original ToS says nothing about a 50% compensation maximum, so he made up that "rule" later and we should not accept that (it's not legal anyway I guess). I hope Bitmine.ch realizes they can't pull any extra tricks on us waiting customers.... we will see what happens...
|
|
|
I ordered and paid early october 2013. 1Th Desk. Still waiting, no news... customer protection plan status: January 05 2014 : +10% January 15 2014 : +10% January 25 2014 : +10% February 4 2014 : +10% February 14 2014: +10% February 24 2014: +10% March 5 2014: +10% status on my account today: processing.... no shipping this week March 15 2014: +10% total compensation now is 80% , should receive (at least) 1 extra Desk with 4 modules = 800Gh/s. If I haven't received my order by March 25th, we are at 90% = a full extra 1T Desk (yes I can still laugh about it....)
|
|
|
|