Hi bro, been noticed this after reading again your first post


Have you tried installing only the 4GB graphics card in PCIe x16 slot on mboard? exclude all risers and other GPU's just to isolate your prob

if you already did this and you still got an error, I supposed, you had a bad GPU card

Ese error (si no me equivoco, hablo de memoria) lo da Windows cuando tienes la VBIOS de la tarjeta modificada.

Tienes que utilizar "atikmdag-patcher-1.4.6" para evitar el problema.

Si has comprado la tarjeta de segunda mano quiza hayan modificado la VBIOS y tu no lo sepas.

AB means Afterburner.

"For make sure use AB and set it to default setting."
Set it to the default setting, cause stock bios and modded one would be different on default AB setting.

where can I find the right blockchain version drivers for my XFX 580?
You can find it here:
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Tips: Install until extracting file only then ignore installation process (cancel it). Then update your RX 580 (4GB) driver manually from Device Manager, You driver file will be located in drive C, AMD/Packages/../.. (as default).

Edit: Then restart your system. 

What is your problem Download  atikmdag patcher 1.4.6, run the program and hit YES button ( si in your case ) !!!!
atikmdag patcher not going to tell you if your card have a modded bios or not !!!
Its going to fix your driver issue , error code 43, if you bios is modded !!!
Simple and easy !!!

What is your problem Huh Download  atikmdag patcher 1.4.6, run the program and hit YES button ( si in your case ) !!!!
atikmdag patcher not going to tell you if your card have a modded bios or not !!!
Its going to fix your driver issue , error code 43, if you bios is modded !!!
Simple and easy !!!

AB means Afterburner.

"For make sure use AB and set it to default setting."
Set it to the default setting, cause stock bios and modded one would be different on default AB setting.

where can I find the right blockchain version drivers for my XFX 580?
You can find it here:
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Tips: Install until extracting file only then ignore installation process (cancel it). Then update your RX 580 (4GB) driver manually from Device Manager, You driver file will be located in drive C, AMD/Packages/../.. (as default).

Edit: Then restart your system.  

Uninstall drivers with ddu in safe mode ...
... reset the mainboard´s cmos ..
... maybe help.

Good luck 

With 21 Mhs +++ after Compute mode, seem like your card running at stock bios. For make sure, use AB and set it to a default setting then take the pic, post here.

Error 43, most caused by a driver issue. Yes, you can try to patch the driver (even when you are running on stock bios). Or, load different driver (I suggesting blockchain version) for manually updating your 580 (4GB).

That card might have a modded bios, let us know if thats helped with error 43

Run pixel clock patcher may help. I received error code 43 everytime I mod my card. Run pixel clock patcher then restart your rig and it'll work

Thats a lot of screenshots. I only checked the first but i some possible reasons for your error would be:

1. you have a bad riser - try swapping risers and cables to see if it works.
2. your GPU has a bad bios mod - if you have the same GPU try copying the bios mod from the those that work

Code 43 typically regards to Driver or Riser. You may recheck on both: reinstall driver or check is there any faulty riser.

In my case it was a faulty card. If it's good when pluged into x16 without the riser cable, then just swap the riser.

Nah, guys check this issue, 5 cards detected only one shows a code 43

https://2.bp.blogspot.com/-obMMPfp98-U/Wr8EtJuvXSI/AAAAAAAAJIk/h7kBOfX4ejwtTRwQiRZMC6iPQxUxJhIRQCLcBGAs/s1600/Error-Codigo-43-10.png

@OP, enable 4g decoding in your bios

Enable 4g decoding yes since you have a new motherboard and also make sure to change the pcie configuration to x1 as the risers extend your card to x16 on the riser slot but the tiny part that fits in the motherboard is pciex1.

did you mod the bios? If so you need the pixel clock patch tool.

Do you have a modded bios on your cards ? specially on the one what give you error 43 ?
Did you got that card used or brand new ?
If you did not flashed ( modded ) the bios on your cards, and you bought your RX580/4GB used or from different source, that card might have a modded bios and might was a customer return to that shop where you ordered from.
If this is the case try to use AMD/ATI Pixel Clock Patcher, you can download from HERE

(If you have a modded bios on your another cards, and just added the rx580/4GB to your system and modded the bios, then you need to run the AMD/ATI Pixel Clock Patcher again on your system.)

On those screenshot you posted ... each of your rx 580 cards mining ETH with 10MH/s ?? Did you set your driver to compute mod

You can use THIS TOOL to set each cards to compute mod with a few click

Hi Guys
Yobit had the PacCoin to the new $Pac swap 1st March they then deleted the old paccoin from there systems and started trading the new $PAC but on Yobit they do not use symbols so deleted the $ off the PAC and are trading with PAC, so try not to be confused if you try sending old paccoin coins to the new PAC ( $PAC )

Do not send the old Paccoins to that wallet in Yobit or you will lose your coins. only $PAC from the new wallet will except $PAC coins

Cryptopia in New Zealand  did the swap of old Paccoin to the new $PAC on the  28th February but have not opened $PAC for trading yet, we don't know when they will be opened as they at one stage had on their website 2 more weeks,

If you have not done redemption then I would suggest you do it as soon as you can, you only have this month at 1000 paccoin to 1 $PAC then next month it drops to 2000 paccoin to 1 $PAC

Want to do the redemption now, then here is a document to show you how, we have made it easier for you.

That is this is an easy step by step chart to help you set up and exchange your old PacCoin for the new $PAC

https://docs.google.com/document/d/1khl3YOAzJMWIhtW0QSjpVikMiJb4gMWObe7XQbksPZA/edit?usp=sharing English
https://docs.google.com/document/d/1KO7l_vmnH0isXqYSUmwZLStJnuoZJPnIKPqDISOGYAA/edit                   Japanese
https://docs.google.com/document/d/15wIl9mMlZSoA4ElGvChGncrUvCk7cf-LZG04eVOnR_A/edit?usp=sharing   French
https://www.dropbox.com/s/cz1hwhu0h064q59/PAC_White_Paper_2018_Final-RUS.pdf?dl=0                         Russian

Now if you find that too hard still, the Moderators on the official PAC Peoples Alternative Choice discord group are really helpful and the link to it is here>> https://discord.gg/QWm6Qrs

There is really no excuse not to be able to change your coins in the redemption, there is help everywhere, but there is also scammers out there to which is WHY one should go to the official People's Alternative Choice PAC and no other.
if you have already done your redemption and have not got your new coins then send an email to support (@) paccoin.net

A further note to people wanting to send coins through the redemption wallet to the wallets dated days like Monday Tuesday and so on, it does not really matter what day it is as they will all get looked at eventually anyway.
The following are the redemption wallets to send to,

1.   Sat: Aw9yEjiCUXtoJzav9vCiFTm98UBk5GombU
2.   Sun: AxqfDhAkhbna8Ft9WmqE2QwVqQUEfnNRnh
3.   Mon: AgV85LiTHnLCa7xdYHNxMwyRCAPPNoK6td
4.   Tue:  B3zGATXPtNRbHCeAmhH1sFTb4f2RQJW6nS
5.   Wed: Azhg43v7TAbhfd3MBfsZaSfWfCEqo2hrcw
6.   Thu:  ArUtzuRrCvkBQcK6KZrBsejt74EJjj9ZJC
7.   Fri: B3UDXtQkmwfFy2Vx2mpAPasovgG395omhR

There is a pretty picture there where it shows where to put your address and the address of your nice brand new $PAC wallet, (Important and critical) take a screenshot before you send it, in case.

there is no other wallet address, watch for sites where scammers try to lead you to they want them valuable coins you have for themselves.

you need to check memory errors and which gpus are crashing, memory errors can be deceptive too, also check incorrect shares, if you have any then you need to decrease the clock. Nothing will be gained by increasing memory clock if you don't do many tests if is okay to increase. Silicon to silicon are different and so memory chips, so if one gets to such overclocking that does not mean you will get to without issues. You need to read a lot.

Also many people complain about pool low hashrate and that is linked to stale and incorrect shares, stale linked to internet connection, incorrect shares linked to high memory clocks.

Im running my hynix cards at 1150/2150, 880mv, and im getting 30.2mh/900mh eth/dcr
Those are RX 570,, 580 can do a little better with dcr.

These clocks are way too high for mining.

Generally core clock of 1150-1200 is good enough, and alot of people would argue to set it even lower to reduce power and heat.
The memory clock depends on what type of memory you got; Samsung and Hynix can go for 2150-2250, elpida at around 2000 (never had a micron card, so I dont know about them).

Both core and memory would "most probably" work on 900mv; if your cards are good, they can work with even lower than that. that will give you around 100-110W reading from gpu-z in dual mining, and around 140-150w from the wall.

I personally use OverdriveNTool for overclocking and undervolting, and it works really well.

Check this guide, its really nice and hope its helpful.
https://mining.help/

1) Get a better power supply, 1000W fore 6 of those GPU's without undervolting is inviting trouble
2) Use a tool like MSI Afterburner to undervolt the GPU's and then overclock the memory while keeping core low

Hola,

Tienes problemas por la fuente, 1000w es muy justa, cuando da esos reinicios normalmente es por la fuente de alimentacion que no da suficiente energia, a mi me pasaba lo mismo hasta que puse otra fuente paralela, puedes montar dos fuentes, unes los cables verde y negro de una fuente a otra para que enciendan las 2 fuentes al encender el PC. Alimenta la mitad de las graficas con una fuente y la otra mitad o como tu prefieras depende de las potencias que tengas.

saludos